Onforu BDB60D-3

Onforu 70W Dusk to Dawn Outdoor Flood Light

Model: BDB60D-3 | Brand: Onforu

1. Киришүү

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Onforu 70W Dusk to Dawn Outdoor Flood Light. Please read this manual thoroughly before installation and retain it for future reference.

The Onforu 70W Dusk to Dawn Outdoor Flood Light is a high-luminosity LED security light designed for outdoor use. It features a photocell sensor for automatic dusk-to-dawn operation and adjustable heads for wide area illumination.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. Improper wiring can result in electric shock or fire.

3. Пакеттин мазмуну

4. Техникалык шарттар

ӨзгөчөлүкСпецификация
Модель номериBDB60D-3
Ватtage70 Вт
Жарыктык7000 Lumens
Түс температурасы6500K (Күндүзгү ак)
Тtage120 вольт
МатериалАлюминий
Суу каршылыкIP65 суу өткөрбөйт
Жарык баштар3 жөнгө салынуучу баштар
Башкаруу ыкмасыPhotocell Sensor (Dusk to Dawn) / Wall Switch
Продукциянын өлчөмдөрү10.68"L x 5.52"W x 4.8"H

5. Орнотуу

This flood light is designed for hardwired installation. Ensure power is disconnected at the circuit breaker before proceeding.

  1. Монтаждоо бетин даярдаңыз: Attach the mounting bracket to your electrical junction box using the provided screws. Ensure the bracket is securely fastened.
  2. Зым байланыштары: Connect the fixture's wires to your household wiring. Match the wires: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Secure connections with wire nuts.
  3. Арматураны орнотуу: Align the fixture with the mounting bracket and secure it with the center screw. Ensure the fixture is flush against the mounting surface.
  4. Жарык баштарын тууралоо: Loosen the screws on the side of each light head to adjust their angle. Tighten the screws once the desired illumination area is achieved. The heads can be adjusted up to 90 degrees vertically and 335 degrees horizontally.
Diagram showing the hardwired installation steps for the Onforu flood light.
5.1-сүрөт: Зым менен орнотуу кадамдары.
Diagram showing the adjustable angles of the three light heads.
Figure 5.2: Adjustable light heads for customized illumination.

Video 5.1: Official product video demonstrating the Onforu 70W Dusk to Dawn Lights and their features.

6. Иштөө режимдери

The Onforu 70W Flood Light offers two operating modes:

6.1. Dusk to Dawn Mode

In this mode, the built-in photocell sensor automatically detects ambient light levels. The light will turn on at night (10-20 Lux) and turn off during the daytime (30-60 Lux), providing hands-free operation and energy savings.

Image illustrating the dusk to dawn mode with the light automatically turning on at night and off during the day.
Figure 6.1: Dusk to Dawn automatic operation.

6.2. Switch-Controlled Mode

To operate the light using a standard wall switch, cover the photocell sensor with the provided black cap. This will bypass the dusk-to-dawn function, allowing you to manually turn the light on and off as needed.

Image showing how to cover the photocell sensor with a black cap for switch-controlled operation.
Figure 6.2: Using the black cap for switch-controlled mode.

7. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин прожекторуңуздун оптималдуу иштешин жана узак мөөнөттүү иштешин камсыз кылат.

8. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Түнкүсүн жарык күйбөйт.1. Электр өчүк.
2. Photocell sensor is obstructed or faulty.
3. Зымдар маселеси.
1. Ажыраткычты жана дубалды өчүргүчтү текшериңиз.
2. Clean the photocell sensor. Ensure no external light source is shining directly on it. If using switch-controlled mode, ensure the black cap is removed.
3. Verify all wire connections are secure. Consult a qualified electrician if unsure.
Жарык күндүзү күйүп турат.1. Photocell sensor is covered.
2. Photocell sensor is faulty.
1. Ensure the black cap is removed from the photocell sensor.
2. Contact customer support if the issue persists after ensuring the sensor is uncovered and clean.
Light flickers or cycles on/off.1. Электр энергиясы жетишсиз.
2. Бошогон зымдар байланышы.
3. Photocell sensor interference.
1. Ensure stable 120V power supply.
2. Check and tighten all wire connections.
3. Ensure no intermittent light sources (e.g., car headlights, other security lights) are affecting the photocell sensor.

9. Кепилдик жана колдоо

This product is sold without an explicit warranty. For any technical assistance or inquiries, please refer to the contact information provided by your retailer or visit the official Onforu webсайт.