Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge Instruction Manual

1. Продукт бүтүп калдыview

The Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge (Model 69ELF114TWG) is designed to reduce incoming water pressure to a safe and consistent level for residential and commercial plumbing systems. This unit features a compact design, lead-free bronze construction, and an integrated internal bypass mechanism. It includes a color-coded gauge for easy pressure monitoring and adjustment.

Figure 1: Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge. This image shows the regulator with its integrated pressure gauge and yellow adjustment handle.

2. Коопсуздук маалыматы

• Always shut off the main water supply before beginning any installation or maintenance.
• Коргоочу көз айнек жана кол кап сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
• Агышууларды болтурбоо үчүн бардык туташуулардын туура мөөр басылганын текшериңиз.
• Consult local plumbing codes and regulations for proper installation procedures.
• Эгерде сиз орнотуунун кайсы бир бөлүгү боюнча күмөн санасаңыз, квалификациялуу сантехникке кайрылыңыз.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 1x Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator
• 1x Integrated Pressure Gauge

4. Орнотуу

This regulator features a double union PEX-A (cold expansion) barb design for simplified installation in PEX-A piping systems. Ensure the regulator is installed in the correct flow direction, indicated by an arrow on the body.

1. Орнотуу сайтын даярдоо: Turn off the main water supply. Drain the water lines to relieve pressure. Select a suitable location for the regulator, typically after the main shut-off valve and before any branch lines.
2. Cut and Prepare PEX-A Piping: Cut the PEX-A pipe to the required length, ensuring clean, square cuts. Prepare the pipe ends for cold expansion connections according to PEX-A system manufacturer guidelines.
3. Connect the Regulator:
   • Apply appropriate thread sealant (e.g., Teflon tape or pipe dope) to the male threads of the PEX-A fittings.
   • Thread the PEX-A fittings onto the double union ends of the regulator. Ensure the flow arrow on the regulator body points in the direction of water flow into the building.
   • Tighten the union nuts securely, but do not overtighten.
   • Perform cold expansion connections on the PEX-A pipe ends to the fittings according to PEX-A system manufacturer instructions.
4. Басым өлчөгүчтү орнотуу: The pressure gauge is typically pre-installed. Ensure it is securely threaded into the designated port on the regulator body.
5. Суу менен камсыздоону калыбына келтирүү жана агып кетүүлөрдү текшерүү: Slowly turn on the main water supply. Carefully inspect all connections for any signs of leaks. Tighten connections as necessary.

2-сүрөт: Каптал view of the Apollo Water Pressure Regulator, showing the double union PEX-A connections and the flow direction arrow. Note the "MAX INLET 400 PSI" marking.

5. Иштөө нускамалары

The regulator is factory-set at 50 psi and is adjustable from 15 psi to 75 psi. No special tools are required for adjustment.

1. Учурдагы басымды текшерүү: Observe the reading on the integrated pressure gauge. The gauge is color-coded to indicate pressure ranges (e.g., Low, Optimal, Excessive).
2. Жөнгө салуу басымы:
   • үчүн көбөйтүү pressure: Turn the yellow adjustment handle саат жебеси боюнча.
   • үчүн азайтуу pressure: Turn the yellow adjustment handle сааттын жебесине каршы.
   • Make small adjustments and allow the system pressure to stabilize before re-checking the gauge.
3. Жөндөөлөрдү ырастоо: Once the desired pressure is achieved (typically between 50-60 psi for most residential applications), confirm the reading on the gauge.

Сүрөт 3: Жакын пландан view of the Apollo Water Pressure Regulator, highlighting the pressure gauge with its color-coded optimal range and the yellow adjustment handle.

6. Техникалык тейлөө

The Apollo Water Pressure Regulator is designed for minimal maintenance. Regular checks can help ensure optimal performance.

• Periodic Pressure Check: Periodically check the pressure gauge to ensure the system pressure remains at the desired setting. Fluctuations may indicate a need for adjustment or inspection.
• агып текшерүү: Annually inspect the regulator and connections for any signs of leaks or corrosion.
• Тазалоо: Жөнгө салгычтын сыртын жарнама менен тазалаңызamp cloth as needed. Do not use harsh chemicals.
• Sediment Filter (Optional): If your water supply contains significant sediment, consider installing a sediment filter upstream of the pressure regulator to prevent internal clogging.

7. Кыйынчылыктарды

8. Техникалык шарттар

• Модел: 69ELF114TWG
• Материал: Бронза
• Кирүү туташуу өлчөмү: 3/4 дюйм
• Кирүүчү туташуу түрү: Cross Linked Polyethylene (PEX-A)
• Розетка туташуу түрү: PEX
• Максималдуу иштөө басымы: 400 PSI (Inlet)
• Жөнгө салынуучу басым диапазону: 15 - 75 PSI (Factory-set at 50 PSI)
• Элементтин өлчөмдөрү (L x W x Y): 2.13 x 7 x 8 дюйм
• Элемент Салмагы: 2.53 фунт
• Сертификаттар: Certified to ASSE 1003 and CSA B356, listed by ASSE and IAPMO (cUPC)
• Өзгөчөлүктөр: Integrated internal bypass mechanism, Color-coded gauge

9. Кепилдик жана колдоо

This Apollo Water Pressure Regulator comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Apollo customer support.

For technical support or inquiries, please visit the official Apollo webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.