Scheppach DP16VLS мамы бургулоо боюнча нускама

1. Киришүү

This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Scheppach DP16VLS Pillar Drill. Please read these instructions carefully before using the machine to ensure proper function and to prevent injury or damage.

Image 1: Scheppach DP16VLS Pillar Drill with included vice.

2. Коопсуздук нускамалары

Always observe general safety regulations when working with power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Жалпы коопсуздук эскертүүлөрү:

• Жумуш аймагынын коопсуздугу: Жумушчу жерди таза жана жакшы жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат. Жарылуучу чөйрөдө, мисалы, күйүүчү суюктуктар, газдар же чаң бар жерде электр шаймандарын иштетпеңиз.
• Электр коопсуздугу: Электр шайманынын сайгычтары розеткага дал келиши керек. Эч качан сайгычты эч кандай жол менен өзгөртпөңүз. Жерге туташтырылган же жерге төшөлгөн беттерге денеге тийбеңиз.
• Жеке коопсуздук: Always wear eye protection. Use hearing protection when operating the drill. Wear appropriate clothing; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
• Куралды колдонуу жана кам көрүү: Электр аспапты күчтөп албаңыз. Колдонмоңуз үчүн туура электр шайманын колдонуңуз. Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же электр шаймандарын сактоодон мурда вилканы кубат булагынан ажыратыңыз.

Specific Pillar Drill Safety:

• Always secure the workpiece firmly to the drill table using the included vice or clamps. Never hold the workpiece by hand.
• Ensure the drill bit is correctly installed and tightened in the chuck before operation.
• Adjust the drilling depth stop to prevent drilling into the drill table.
• Keep hands clear of the rotating drill bit and all moving parts.
• Allow the motor to reach full speed before beginning to drill.
• Do not attempt to clear chips or debris while the drill is operating.

3. Продукт бүтүп калдыview жана өзгөчөлүктөрү

The Scheppach DP16VLS is a robust pillar drill designed for precise drilling in various materials including wood, metal, aluminum, and plastic. It features a powerful 500W motor and a variable speed system.

Негизги өзгөчөлүктөрү:

• Мотор: Powerful 500 Watt motor.
• Ылдамдыгы: 5 adjustable speeds ranging from 600 to 2650 revolutions per minute (rpm).
• Чак: Keyed chuck with a capacity of 1.5 to 13 mm.
• Бургулоо тереңдиги: Maximum drilling stroke of 50 mm.
• Жумуш столу: Robust steel structure, height-adjustable, and inclinable up to 45 degrees.
• Вице: Includes a vice with a maximum clamping capacity of 62 mm.
• Лазер: Integrated positioning laser for precise drilling point alignment.
• Outreach: 105 mm outreach from the column to the chuck center.

Image 2: Diagram illustrating ergonomic handle, precision laser, variable speed, and belt drive.

Image 3: Diagram illustrating adjustable drilling table, chuck capacity, heavy base, and 500W motor.

4. Ассамблея

The Scheppach DP16VLS Pillar Drill is typically supplied partially disassembled. Follow these general steps for assembly. Refer to the detailed assembly diagrams in your product packaging for specific instructions.

1. Негизги жана мамычанын жыйындысы: Secure the main column to the stable base using the provided fasteners. Ensure all connections are tight.
2. Стол монтажы: Attach the work table to the column, ensuring it can be adjusted vertically and rotated freely.
3. Drill Head Assembly: Mount the drill head assembly onto the top of the column. Connect any necessary electrical components as per the wiring diagram.
4. Чак орнотуу: Install the drill chuck onto the spindle. Ensure it is seated correctly and securely.
5. Handle and Vice: Attach the feed handles and the included vice to the work table.
6. Кур орнотуу: If not pre-installed, install the drive belt between the motor and spindle pulleys. Adjust belt tension as needed (refer to Maintenance section).

Important: Before first use, verify all fasteners are securely tightened and all components are correctly aligned.

5. Иштөө нускамалары

5.1 Preparing for Drilling

• Бургулоочу бит тандоо: Choose the appropriate drill bit for the material and hole size. Insert it into the chuck and tighten securely with the chuck key.
• Ылдамдыкты жөндөө: Open the belt cover and adjust the belt position on the pulleys to select the desired speed. Higher speeds are generally for smaller bits and softer materials, while lower speeds are for larger bits and harder materials. Close the belt cover before operation.
• Adjust Work Table: Loosen the table lock and adjust the work table height and angle as required for your workpiece. Re-tighten the lock securely. The table can be tilted from +45° to -45°.
• Коопсуз жумуш бөлүгү: Place the workpiece on the table and secure it firmly using the included vice or clamps. Ensure it cannot shift during drilling.
• Set Drilling Depth: Use the depth stop mechanism to set the desired drilling depth. This prevents drilling too deep.
• Лазерди иштетүү: Turn on the integrated laser guide to precisely align the drilling point.

Image 4: User drilling into a wooden beam, demonstrating proper workpiece securing.

Image 5: User drilling into a metal workpiece secured by the included vice.

Image 6: Close-up of the depth scale and laser guide for precise control.

5.2 Бургулоо процедурасы

1. Бардык коопсуздук чаралары сакталышын камсыз кылуу.
2. Turn on the drill using the power switch. Allow the motor to reach its operating speed.
3. Slowly lower the drill bit into the workpiece using the feed handles. Apply steady, even pressure.
4. Do not force the drill. If the motor slows significantly, reduce feed pressure.
5. Periodically retract the drill bit to clear chips, especially when drilling deep holes in metal.
6. Once the desired depth is reached, retract the drill bit completely from the workpiece.
7. Turn off the drill and wait for the chuck and drill bit to stop rotating before removing the workpiece or making adjustments.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your pillar drill.

• Тазалоо: After each use, clean the machine of dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
• Майлоо: Periodically lubricate moving parts such as the column, spindle, and feed mechanism with light machine oil.
• Кур чыңалуу: Check the drive belt tension regularly. A properly tensioned belt should have slight give when pressed. Adjust if too loose or too tight to prevent slippage or excessive wear.
• Чакты тейлөө: Keep the chuck jaws clean and free of debris. Lubricate the chuck mechanism occasionally.
• Электр текшерүү: Regularly inspect the power cord and plug for damage. If damaged, have it replaced by a qualified technician.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your Scheppach DP16VLS Pillar Drill.

8. Техникалык шарттар

Technical data for the Scheppach DP16VLS Pillar Drill.

• Модель номери: DP16VLS
• Өндүрүүчү: Scheppach
• Макала коду: SCH5906810901
• Продукциянын өлчөмдөрү: 43.5 x 22 x 60 см
• Элемент Салмагы: 14 кг
• Материал: Болот
• Түсү: Көк
• Бүтүрүү: Жылтырак
• Кубат булагы: Электр зымдары
• Тtage: 230 вольт
• Ватtage: 500 Ватт
• Ampкарылык: 16 Ampere
• Чак сыйымдуулугу: 1.5 - 13 мм
• Max Drilling Depth: 50 мм
• Ылдамдыктар: 5 (600-2650 об/мин)
• Макс айлануу ылдамдыгы: 2650 об/мин
• Үн деңгээли: 84 децибел
• Кабелдин узундугу: 2000 мм
• Max Distance Chuck to Table: 170 мм
• Max Distance Chuck to Base: 250 мм
• Столдун кыйшаюусу: -45°тан +45°ка чейин
• Камтылган компоненттер: Pillar Drill, Vice

Image 7: Diagram illustrating the 50 mm drilling depth capacity.

Image 8: Diagram showing suitable materials for drilling: wood, steel, metal, aluminum, plastic.

Image 9: Close-up of drill head showing 105 mm outreach from column to chuck center.

9. Кепилдик жана колдоо

For warranty information, please refer to the documentation included with your purchase or contact Scheppach customer service directly. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach webбайланыш маалыматы үчүн сайт.