1. Продукт бүтүп калдыview
The PEDROLLO Presscontrol Easy Press II is an advanced electronic device designed to automate the operation of single-phase electric pumps up to 2 HP. It manages the pump's start and stop functions based on water demand, activating the pump when a tap is opened and deactivating it when the tap is closed.
Equipped with microprocessor logic, the Easy Press II offers crucial protection features. It safeguards the pump against dry running, automatically or manually resetting the system after a dry-run event. Furthermore, it prevents excessively frequent pump starts, which can occur due to minor leaks in the water system, thereby extending the pump's lifespan and ensuring stable water pressure.
Сүрөт 1: Алдыңкы view of the PEDROLLO Presscontrol Easy Press II.
This image shows the compact design of the Easy Press II, featuring a pressure gauge, status indicators (Power, Out of Service, Dry, Running, Frequent Start-up), and the Pedrollo branding. The device is primarily white and blue with orange accents.
2. Негизги өзгөчөлүктөрү
- Automatic Pump Control: Starts and stops single-phase electric pumps based on water demand.
- Кургак жүрүүдөн коргоо: Microprocessor logic prevents pump damage from operating without water, with automatic or manual reset.
- Агышуудан коргоо: Protects the pump from frequent starts caused by small system leaks.
- Интегралдык басым өлчөгүч: Allows for easy monitoring of system pressure.
- Жогорку коргоо рейтинги: IP 65 rated for dust and water resistance, suitable for various environments.
- Күчтүү дизайн: Constructed from durable plastic material.
3. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Өндүрүүчү | PEDROLLO |
| Модел | Easy Press II |
| Максималдуу агым ылдамдыгы | Мүнөтүнө 200 литр (12 м³/саат) |
| Иштөө басымы | 10 бар |
| Баштоо басымы | 1.5 бар |
| Liquid Temperature Limit | Up to +65 °C |
| Айлана-чөйрөнүн температурасынын чеги | Up to +40 °C |
| шаттангыла басымы | > 40 bar |
| Коргоо рейтинги | IP 65 |
| Тtage | 230 V |
| Жыштык | 50/60 Гц |
| Максималдуу ток | 16 A (for Easy Press II) |
| Элемент Салмагы | 2 килограмм |
| Түс | Ачык күрөң |
| Материал | Пластик |
| Power Source | Электр кабели |
4. Коопсуздук маалыматы
Always read and understand all safety warnings and instructions before installing, operating, or maintaining the PEDROLLO Presscontrol Easy Press II. Failure to follow these instructions could result in electric shock, fire, serious injury, or property damage.
- Ensure the power supply matches the device's specifications (230V, 50/60Hz).
- All electrical connections must be performed by a qualified electrician and comply with local electrical codes.
- Кандайдыр бир орнотууну, тейлөөнү же каталарды оңдоодон мурун электр кубатын өчүрүңүз.
- Do not operate the device if it is damaged or if the power cable is frayed.
- Балдарды жана уруксаты жок кызматкерлерди орнотуу аянтынан алыс кармаңыз.
- Электрдик коркунучтарды алдын алуу үчүн туура жерге туташтырууну камсыз кылыңыз.
5. Орнотуу жана орнотуу
The Easy Press II is designed for easy integration into single-phase electric pump systems. Proper installation is crucial for optimal performance and safety.
- Монтаждоо: Install the Easy Press II vertically, ensuring the flow direction matches the arrows on the device. It should be mounted between the pump and the first point of water consumption.
- Гидравликалык туташуу: Connect the inlet of the Easy Press II to the pump's discharge and the outlet to the system's piping. Ensure all connections are watertight using appropriate sealants (e.g., PTFE tape).
- Электр байланышы:
- Connect the power supply cable to the Easy Press II's input terminals.
- Connect the pump's power cable to the Easy Press II's output terminals.
- Ensure all connections are secure and properly insulated. Refer to the wiring diagram provided in the technical documentation (Figure 2).
- Системаны даярдоо: Before starting the pump, ensure the pump and the Easy Press II are fully primed with water to prevent dry running.
- Алгачкы ишке киргизүү: Once all connections are secure and the system is primed, restore power. The Easy Press II will initiate the pump when water demand is detected.
Figure 2: Technical diagram and dimensions of the PEDROLLO Easy Press II.
This image provides detailed technical specifications, performance curves, and dimensional drawings for the Easy Press II. It illustrates various models (Easy Press 1, Easy Press 2) and their electrical characteristics, as well as typical installation setups and physical dimensions.
6. Операция
The PEDROLLO Easy Press II operates automatically once installed and powered. It functions as an electronic flow and pressure switch.
- Pump Start: When a tap or valve in the system is opened, causing a drop in pressure and flow, the Easy Press II detects this demand and automatically starts the connected electric pump.
- Pump Stop: When all taps or valves are closed, and water flow ceases, the Easy Press II detects the absence of flow and stops the pump after a short delay, maintaining system pressure.
- Статус көрсөткүчтөрү: The device features LED indicators (Power, Out of Service, Dry, Running, Frequent Start-up) to provide visual feedback on its operational status. Refer to the device's front panel for specific indicator meanings.
7. Техникалык тейлөө
The PEDROLLO Easy Press II is designed for minimal maintenance. However, regular checks can help ensure its longevity and reliable operation.
- Үзгүлтүксүз текшерүү: Periodically check the device and its connections for any signs of leaks, damage, or corrosion.
- Тазалык: Keep the exterior of the device clean and free from dust or debris. Do not use abrasive cleaners.
- Кышка даярдоо (эгер бар болсо): In areas subject to freezing temperatures, ensure the device and connected piping are drained or protected from frost to prevent damage.
- Манометрди текшерүү: Monitor the pressure gauge regularly to ensure it is functioning correctly and providing accurate readings.
Always disconnect power to the device before performing any maintenance or inspection.
8. Кыйынчылыктарды
The Easy Press II incorporates intelligent features to protect the pump and indicate operational issues. Here are common scenarios and their resolutions:
- Pump Not Starting / "Dry" Indicator On:
- Себеби: Dry running detected (no water in the pump or suction line).
- Чечим: Ensure the pump is primed with water. The Easy Press II may attempt an automatic reset after a period. If not, manually reset the device by pressing the "START/STOP" button or by cycling the power.
- Pump Cycling Frequently / "Frequent Start-up" Indicator On:
- Себеби: Small leaks in the system (e.g., dripping tap, faulty toilet fill valve) or a non-return valve issue.
- Чечим: Inspect all plumbing fixtures and connections for leaks. Repair any leaks found. Check the non-return valve in the system for proper operation.
- Pump Not Stopping:
- Себеби: Continuous water flow (e.g., open tap, major leak) or a sensor malfunction.
- Чечим: Close all taps and check for significant leaks. If the pump continues to run without demand, disconnect power and contact a qualified technician.
- No Power / "Power" Indicator Off:
- Себеби: No electrical supply to the device.
- Чечим: Check the circuit breaker, fuses, and power connections. Ensure the power outlet is functional.
For issues not covered here, or if troubleshooting steps do not resolve the problem, contact a qualified technician or the manufacturer's support.
9. Кепилдик жана колдоо
Information regarding the specific warranty period and terms for the PEDROLLO Presscontrol Easy Press II is typically provided at the point of purchase or within separate documentation accompanying the product. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or service inquiries, please contact your authorized PEDROLLO dealer or the manufacturer directly. Information on spare parts availability was not provided in the product details.
Manufacturer: PEDROLLO
