House of Marley Stir It Up Wireless Turntable

Introduction

The House of Marley Stir It Up Wireless Turntable offers a premium vinyl listening experience with the convenience of Bluetooth connectivity. Crafted with sustainable materials, this turntable features a built-in pre-amp, two-speed belt drive, and a replaceable Audio Technica cartridge, delivering superior audio quality for your favorite records.

Image: The Stir It Up Wireless Turntable connected to House of Marley speakers, showcasing its design and connectivity.

Коопсуздук маалыматы

• Айланма табакчаны иштетүүдөн мурун бардык көрсөтмөлөрдү окуп чыгыңыз.
• Айланма табакчаны суудан же нымдуулуктан алыс кармаңыз.
• Эч кандай желдетүүчү тешиктерди жаап албаңыз.
• Өндүрүүчү белгилеген тиркемелерди/аксессуарларды гана колдонуңуз.
• Чагылган түшкөн учурда же көп убакытка колдонулбаган учурда айланма табакты розеткадан сууруп коюңуз.
• Бардык тейлөөлөрдү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.

Пакеттин мазмуну

Бардык компоненттер кутучада бар экенин текшериңиз:

• House of Marley Stir It Up Wireless Turntable
• Кубаттуу адаптер
• RCA кабели
• USB кабели
• Айлануучу табак
• Silicone Slip Mat
• Drive Belt (often pre-installed or located around the platter)
• Каршы салмак
• 45 RPM адаптери
• Rewind Fabric Dust Cover

Продукт бүттүview

Сүрөт: Жогорку view highlighting key components including Solid Aluminum Platter, Regrind Silicone Pad, Anti-Skating Control, Replaceable Audio Technica Cartridge, Headphone Jack, and 33/45 RPM speed selector.

Сүрөт: Арткы view showing the RCA (Phono/Line) output, Built-in Pre-Amp switch, USB to PC Recording port, and the Rewind Fabric material.

Орнотуу колдонмосу

1. Пакеттен чыгаруу жана жайгаштыруу: Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.
2. Табакты жана курду орнотуу:
   • Place the aluminum platter onto the center spindle.
   • Locate the small rubber drive belt. If it's around the center of the underside of the platter, gently stretch it around the gold motor spindle located on the turntable base. Ensure it is seated correctly.
   • Place the Regrind Silicone Slip Mat on top of the platter.
3. Counterweight Installation: Slide the counterweight onto the rear of the tonearm. Rotate it clockwise until it is approximately in the middle of the tonearm.
4. Көз салуу күчүн жөндөө:
   • Carefully remove the stylus protector.
   • Lower the tonearm lift lever.
   • Balance the tonearm by rotating the counterweight until the tonearm floats freely and is parallel to the platter.
   • Once balanced, hold the counterweight steady and rotate the numbered ring to '0'.
   • Rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force for the Audio Technica AT3600L cartridge, which is typically 3.5 grams.
5. Конькиге каршы жөнгө салуу: Set the anti-skate dial to the same value as your tracking force (e.g., 3.5). This helps prevent the stylus from skipping inwards.
6. Аудио туташуусу:
   • RCA чыгаруу: Connect the included RCA cable from the turntable's 'OUT PUT' jacks to your ampкөтөргүч же кубаттуу динамиктер.
   • Алдын алаAmp Которуу: а туташуу болсо amplifier with a dedicated 'PHONO' input, set the 'PRE-AMP' switch on the back of the turntable to 'OFF'. If connecting to an 'AUX' or 'LINE' input, set the 'PRE-AMP' switch to 'ON'.
7. Кубат туташуу: Connect the power adapter to the '12V DC' input on the back of the turntable and plug it into a wall outlet.

Иштөө нускамалары

Рекорд ойноо

1. Табактын үстүнө винил пластинкасын коюңуз.
2. Ылдамдыкты тандоо баскычын колдонуп, тиешелүү ылдамдыкты (33 же 45 RPM) тандаңыз. Керек болсо, бир кишилик унаалар үчүн 45 RPM адаптерин колдонуңуз.
3. Колду көтөрүү рычагын колдонуп, колду көтөрүңүз.
4. Кол менен колду жазууну каалаган баштапкы оюктун үстүнө жайгаштырыңыз.
5. Gently lower the tonearm using the lift lever. The stylus will make contact with the record and playback will begin.
6. At the end of the record, the turntable will automatically stop spinning. Lift the tonearm and return it to its rest.

Bluetooth Жупташтыруу

1. Bluetooth динамигиңиз же кулакчыныңыз жупташтыруу режиминде экенин текшериңиз.
2. Айлануучу табакты күйгүзүңүз.
3. Press the Bluetooth button on the turntable to activate Bluetooth mode. The indicator light will flash.
4. Press the Bluetooth button again to initiate pairing. The turntable will search for nearby Bluetooth devices.
5. Туташтырылгандан кийин, Bluetooth индикатору туруктуу күйөт.

Гарнитура уячасын колдонуу

Plug your headphones into the 3.5mm headphone jack located on the front of the turntable for private listening.

Компьютерге USB жаздыруу

Connect the turntable to your computer using the USB cable. Use appropriate recording software (not included) to digitize your vinyl collection.

Кароо жана тейлөө

• Тазалоо: Use a soft, dry cloth to clean the turntable's surface. For the bamboo plinth, a slightly damp cloth can be used, followed by a dry one. Avoid harsh chemicals.
• Стилуска кам көрүү: Gently clean the stylus regularly with a soft brush designed for stylus cleaning, brushing from back to front. Avoid touching the stylus with your fingers.
• Чаң капкагы: Use the included Rewind Fabric Dust Cover to protect the turntable from dust when not in use.
• Белди алмаштыруу: The drive belt may need replacement over time. Refer to the setup guide for re-installation instructions with a new belt.

Проблемаларды чечүү

Техникалык шарттар

• Продукциянын өлчөмдөрү: 15.74 x 15.74 x 3.15 дюйм
• Элемент Салмагы: 12.13 фунт
• Модель номери: EM-JT002-BK
• Бренд: Марли
• Максималдуу айлануу ылдамдыгы: 45 RPM (supports 33 1/3 and 45 RPM)
• Өзгөчөлүктөр: Алдын ала орнотулганAmp, RCA Output, USB Recording, Bluetooth Connectivity
• Материал: Wood (Natural Bamboo), Aluminum, REGRIND Silicone, REWIND Fabric
• Түсү: Кол тамга кара
• Шайкеш түзмөктөр: Speakers, Bluetooth Audio Devices
• Картридж: Replaceable Audio Technica AT3600L MM cartridge

Sustainability and Materials

The House of Marley Stir It Up Wireless Turntable is designed with a commitment to sustainability, incorporating mindfully sourced materials to minimize environmental impact.

Image: Close-up of the natural bamboo material used in the plinth, highlighting its sustainable origin.

• Natural Bamboo: The plinth is crafted from solid bamboo, a rapidly renewable resource.
• REGRIND Silicone: The slip mat is made from REGRIND silicone, utilizing recycled silicone waste.
• REWIND Fabric: The dust cover and other fabric elements are made from REWIND fabric, a blend of recycled materials including organic cotton, hemp, and recycled PET.
• Recycled Aluminum: The platter is made from recycled aluminum.

House of Marley's commitment extends to global reforestation and ocean conservation through partnerships with organizations like One Tree Planted and the Surfrider Foundation.

Кепилдик жана колдоо

This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official House of Marley webсайт.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact House of Marley customer service through their official webсайт же продукт таңгагында көрсөтүлгөн байланыш маалыматы.

Сиз да зыярат кылсаңыз болот Amazon'догу Marley дүкөнү кошумча продукт маалымат жана колдоо ресурстар үчүн.