1. Introduction and Overview
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MPC Complete Factory Remote Activated Remote Start Kit for 2011-2015 Acura RDX. This kit allows you to remotely start, warm, or cool your vehicle using your existing factory key fobs.
The kit includes a Crimestopper RS0 Add-on Remote Start module, a Fortin EVO-ALL Data Bypass Module, and a T-Harness. The firmware is preloaded, ready for programming to your specific vehicle. This system is designed for 2011-2015 Acura RDX C1-D2 models with Key-to-Start ignition and gas engines. It is compatible with automatic transmission vehicles only.
Please read this manual thoroughly before beginning installation or operation to ensure proper functionality and safety.
Figure 1.1: ашыкview of the MPC Complete Remote Start Kit components, including the main module, bypass module, wiring harnesses, and installation tip sheet.
2. Vehicle Requirements and Compatibility
Before proceeding with installation, ensure your vehicle meets the following requirements:
- Унаанын модели: 2011-2015 Acura RDX C1-D2
- От алдыруу түрү: Key-to-Start ignition only. "Push-to-Start" режиминдеги унаалар менен шайкеш келбейт.
- Күйүүчү май түрү: Бензин кыймылдаткычы гана. Гибриддик унаалар үчүн эмес.
- Жугуу: Automatic transmission vehicles only.
- Аймак: Бул продукт АКШ менен Канададан тышкары жерлерде сатуу үчүн чыгарылган унааларда иштебеши мүмкүн.
Figure 2.1: Visual representation of vehicle compatibility, emphasizing that only conventional key-start ignition systems are supported, not push-to-start or hybrid vehicles.
3. Орнотуу жана орнотуу
This kit features a semi plug-and-play installation with a T-Harness, significantly reducing the number of required wiring connections compared to typical systems. However, some wiring connections will still be necessary. Detailed, step-by-step instructions with wire colors and locations are provided via a downloadable tip sheet.
3.1 Керектүү куралдар (кошумча эмес)
- Зым кыргычтар/кримперлер
- Электр лентасы же жылуулукту кичирейтүүчү түтүк
- Multimeter (recommended for verifying connections)
- Basic automotive trim removal tools (a pry tool may be useful)
Сүрөт 3.1: Мурункуample of a plastic pry tool, useful for safely removing interior trim panels during installation.
3.2 Installation Process Overview
- Даярдоо: Disconnect the vehicle's battery. Access the necessary wiring harnesses and modules in your vehicle, typically behind the dashboard or steering column.
- Модуль туташуу: Connect the T-Harness to the vehicle's wiring and the remote start and bypass modules.
- Зымдарды туташтыруу: Make any necessary hardwired connections as specified in the detailed tip sheet. These connections are crucial for proper system operation.
- Модуль программалоо: Follow the specific programming steps for the Fortin EVO-ALL Data Bypass Module and the Crimestopper RS0 Add-on Remote Start. This typically involves a sequence of key turns and button presses.
- Сыноо: Унаанын салонун кайра чогултуудан мурун, батареяны кайра туташтырып, алыстан от алдыруу системасын кылдаттык менен текшериңиз.
- Кайра чогултуу: Secure all modules and wiring, then reassemble the vehicle's interior trim.
A person with basic knowledge of car electronics wiring should be able to install this product successfully. For detailed instructions, refer to the exclusive copyrighted step-by-step installation tip sheet provided by MPC's professional technicians. A link to download this sheet will be provided with your purchase.
Figure 3.2: An illustration suggesting the semi plug-and-play nature of the installation makes it easier than fully hardwired systems.
4. Иштөө нускамалары
This remote start system utilizes your vehicle's existing factory key fobs, eliminating the need for additional remotes.
4.1 Starting Your Vehicle Remotely
To activate the remote start function, press the "lock" button three times on your factory key fob within a short succession. The vehicle's parking lights will flash, and the engine will start.
4.1-сүрөт: Мисample of various OEM factory key fobs that can be used to activate the remote start system.
4.2 Remote Start Features
- Иштөө убактысынын параметрлери: The system can be programmed for run times of 5, 10, 20, or 30 minutes. The default setting is typically 15 minutes.
- Автоматтык түрдө баштоо режими: Programmable 2, 3, or 4 hourly auto-start mode options are available. This feature allows the vehicle to automatically start at set intervals, useful in extreme weather conditions to maintain cabin temperature or battery charge.
- Shutting Down Remotely: To turn off the vehicle remotely, press the "lock" button three times again on your factory key fob.
- Entering the Vehicle: Once the vehicle is running via remote start, insert your key into the ignition and turn it to the "ON" or "RUN" position (do not turn to "START"). Press the brake pedal to disengage the remote start and take control of the vehicle.
5. Техникалык тейлөө
The MPC Remote Start Kit is designed for long-term reliability and typically requires minimal maintenance. However, periodic checks can ensure optimal performance.
- Зымдарды туташтыруу: Periodically inspect all wiring connections for any signs of wear, corrosion, or looseness. Ensure all connections remain secure.
- Модулдун жайгашуусу: Verify that the remote start and bypass modules are securely mounted and not exposed to excessive moisture or heat.
- Программалык камсыздоонун жаңыртуулары: While firmware is preloaded, occasional updates may be released by the manufacturer for improved performance or compatibility. Check the MPC website or contact technical support for information on available updates and procedures.
- Батареянын ден соолугу: Ensure your vehicle's battery is in good condition, especially during colder months, as remote starting can place additional demands on the battery.
6. Кыйынчылыктарды
If you encounter issues with your MPC Remote Start Kit, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Vehicle does not start remotely. |
|
|
| Remote start activates but vehicle shuts off immediately. |
|
|
| Remote start range is poor. |
|
|
Эгерде бул кадамдар көйгөйдү чечпесе, кошумча жардам алуу үчүн MPC техникалык колдоо кызматына кайрылыңыз.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Продукт аты | Complete Factory Remote Activated Remote Start Kit |
| Бренд | MPC |
| Модель номери | B-3744-105 |
| Шайкеш унаа | 2011-2015 Acura RDX C1-D2 (Key-to-Start, Gas, Automatic Transmission) |
| Алыстан башкаруу | Uses existing factory key fobs (3x lock press) |
| Run Time Options | 5, 10, 20, or 30 minutes (programmable) |
| Auto-Start Options | 2, 3 же 4 саатurly (programmable) |
| Өлчөмдөр | 20.32 x 12.7 x 5.08 см (Продукт) |
| Салмагы | 1.36 кг |
| Өндүрүүчү | MPC өнүмдөрү |
8. Техникалык колдоо жана кепилдик
8.1 Техникалык колдоо
MPC provides U.S. based technical support for this product. If you have questions about installation, programming, or troubleshooting, assistance is available.
- Колдоо сааттары: Monday through Friday, 9am to 5pm Arizona time.
- Байланыш: Support tickets can be submitted 24/7 and are answered in the order received during business hours. Refer to the installation tip sheet or your purchase documentation for specific contact methods (e.g., email, phone number).
Figure 8.1: MPC offers free expert technical support from Monday to Friday, 9am to 5pm MST.
8.2 Кепилдик маалыматы
Specific warranty details are typically provided with your product purchase or can be found on the manufacturer's official website. It is recommended to retain your proof of purchase for warranty claims. The warranty generally covers defects in materials and workmanship under normal use.
For detailed warranty terms and conditions, please refer to the documentation included with your kit or visit the MPC Products webсайт.
