OOYCYOO 100 Amp MPPT күн батареясын кубаттоо контроллери (KP60 100 модели) колдонуучунун колдонмосу

1. Продукт бүтүп калдыview

The OOYCYOO 100 Amp MPPT Solar Charge Controller, Model KP60 100, is designed for efficient management of solar power systems. It automatically identifies 12V or 24V battery systems and is compatible with various battery types, including AGM, Sealed, Gel, Flooded, and Lithium. This controller features advanced Maximum Power Point Tracking (MPPT) technology to maximize energy harvest from solar panels, ensuring optimal charging for your battery bank.

Key features include a backlit LCD display for real-time monitoring, enhanced safety protections, and a high DC/DC transfer efficiency of up to 98.7%.

Сүрөт 1: Алдыңкы view of the OOYCYOO 100 Amp MPPT Solar Charge Controller, showing the LCD display and connection terminals.

2. Коопсуздук нускамалары

Орнотуудан жана иштетүүдөн мурун бардык нускамаларды жана эскертүүлөрдү кылдат окуп чыгыңыз. Бул нускамаларды аткарбоо электр шокуна, өрткө же оор жаракатка алып келиши мүмкүн.

• Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller and connected devices.
• Always disconnect the solar panel array and battery before installing or adjusting the controller.
• Контроллерди күйүүчү материалдардан жана тике күндүн нурунан алыс, жакшы желдетилген жерге орнотуңуз.
• Do not disassemble or attempt to repair the controller. Refer to qualified personnel for service.
• Use appropriate circuit breakers or fuses for all connections to protect against overcurrent.
• Wear appropriate personal protective equipment, including eye protection and insulated gloves, during installation.

3. Product Components and Connections

The controller features clearly labeled terminals for solar panel input, battery connection, and load output. It also includes a remote temperature sensor port and USB charging ports.

2-сүрөт: Детальдуу view of the controller's LCD display, 5S Reset button, Solar Panel Terminal, Battery Terminal, Load Terminal, USB 5V2A ports, Remote Temp Sensor port, and RS485 Communication Port.

Пакеттин мазмуну:

• 1 x OOYCYOO 100A MPPT Solar Charge Controller (Model K2500W)
• 1 x Температура сенсору
• 1 x Колдонуучунун колдонмосу (англисче)

4. Техникалык шарттар

The following table outlines the technical specifications for the OOYCYOO 100 Amp MPPT Solar Charge Controller (Model KP60 100).

Figure 3: Application table detailing maximum PV input power and voltage for 12V, 24V, and 48V systems.

5. Орнотуу боюнча колдонмо

Proper installation is crucial for the safe and efficient operation of your solar charge controller. Follow these steps carefully:

5.1 Контроллерди орнотуу

• Кургак, жакшы желдетилген, тике күндүн нурунан, жогорку температурадан жана нымдуулуктан корголгон жерди тандаңыз.
• Ensure sufficient clearance around the controller for proper airflow, especially around the cooling vents.
• Mount the controller vertically on a non-flammable surface using appropriate fasteners.

5.2 Зымдарды туташтыруу

Connect the components in the following order: Battery > Solar Panel > Load. Always ensure correct polarity.

1. Батареяны туташтыруу: Connect the battery cables to the battery terminals on the controller. Ensure the positive (+) and negative (-) terminals are correctly matched. The controller will automatically detect the battery voltage (12V же 24V).
2. Күн панелин туташтыруу: Connect the solar panel cables to the PV input terminals on the controller. Verify correct polarity. Ensure the open circuit voltage (Voc) of your solar array does not exceed 100VDC.
3. Жүктү туташтыруу: Connect your DC load to the load output terminals. Ensure the load current does not exceed the controller's rated load current.
4. Температура сенсорун туташтыруу: Plug the remote temperature sensor into its designated port. This sensor helps the controller optimize charging based on battery temperature.

The controller is compatible with various battery types:

Figure 4: The controller supports AGM, Sealed, Gel, Flooded, and Lithium-Iron phosphate batteries for 12V/24V/48V systems.

6. Иштетүү үчүн колдонмо

Once installed, the controller will begin operation. The LCD display provides real-time system status and allows for configuration.

6.1 LCD дисплей

The backlit LCD display shows various parameters such as battery voltage, charging current, solar panel voltage, load status, and accumulated energy (KWH). Use the buttons below the display to navigate through the different screens and access settings.

6.2 Негизги орнотуулар

The controller allows users to set parameters for different battery types (Lithium, LiFePO4, Li(NiCoMn)O2, Flooded, Sealed, Gel). Refer to the on-screen menu for specific adjustments to absorption voltage, float томtage, жана төмөнкү томtage disconnect settings. A load timer function is also available for controlling DC loads.

6.3 Муздаткыч желдеткичтин иштеши

The built-in cooling fan activates automatically when the internal temperature exceeds 45°C (113°F) and turns off when the temperature drops below 40°C (104°F). This mechanism ensures optimal performance and extends the lifespan of the controller.

7. Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your solar charge controller.

• Тазалоо: Periodically clean the controller's exterior with a dry cloth. Ensure cooling vents are free from dust and debris.
• Байланыштары: Annually inspect all wiring connections for tightness and corrosion. Loose connections can cause overheating and damage.
• Курчап турган чөйрө: Verify that the installation environment remains dry and well-ventilated.

8. Кыйынчылыктарды

The controller incorporates multiple protection functions to safeguard your system. If an issue arises, check the LCD display for error codes or indicators.

8.1 Коргоо функциялары

• PV Over Current/Power Protection
• Күн нурунан кыска туташуудан коргоо
• PV тескери полярдуулукту коргоо
• Түнкү тескери кубаттоодон коргоо
• Батареяны тескери полярдуулуктан коргоо
• Батарея Voltage Коргоо
• Батареяны ашыкча разряддан коргоо
• Battery Overheating, Controller Overheating Protection
• Литий батареясынын төмөн температурадан коргоосу
• Кыска туташуулардан коргоону жүктөө
• Ашыкча жүктөн коргоо
• TVS High Voltage Transients Protection

8.2 Жалпы маселелер

• Заряддоо жок: Check solar panel connections, ensure sufficient sunlight, and verify battery voltage is within operating range.
• Жүктөө иштебей жатат: Check load connections, ensure battery voltage төмөнкү көлөмдөн жогоруtage disconnect setting, and verify load timer settings.
• Ашыкча ысып кетүү: Ensure adequate ventilation around the controller and that cooling vents are clear.
• Туура эмес томtage Окуулар: Verify all connections are secure and the temperature sensor is properly installed.

Эгерде бул пункттарды текшергенден кийин көйгөйлөр чечилбесе, кардарларды колдоо кызматына кайрылыңыз.

9. Кепилдик жана колдоо

The OOYCYOO 100 Amp MPPT Solar Charge Controller is a professional product. For any questions or technical assistance, please contact us directly via email. We are committed to providing prompt support and ensuring your satisfaction.

Кепилдиктин конкреттүү шарттары жана шарттары үчүн сатып алуу документтериңизден караңыз.