1. Киришүү
This manual provides essential information for the installation, operation, and maintenance of the Jones Stephens C07326 Stem. This component is designed as a repair and replacement part for specific tub and shower faucet models. Please read these instructions thoroughly before proceeding with any installation or maintenance.
2. Продукт бүтүп калдыview
The Jones Stephens C07326 Stem is a brass replacement part for Sayco tub and shower faucets. It is compatible with Sayco faucet models 308 and T-308, manufactured from 1968 to the current date. This stem can be used for either the hot or cold side of the faucet assembly.

1-сүрөт: Jones Stephens C07326 Stem. This image displays a brass faucet stem, featuring a splined top for handle attachment, a long cylindrical body, and a threaded base with an O-ring and bibb washer for sealing.
Компоненттер камтылган:
- Капот
- Bibb washer
- Bibb screw
- Капкак прокладкасы
- Packing washer
- Таңгактоочу гайка
3. Орнотуу жана орнотуу
Installation of the C07326 Stem requires basic plumbing knowledge and tools. If you are unsure about any step, it is recommended to consult a qualified plumber.
Керектүү куралдар (камтылган эмес):
- Жөнгө салынуучу ачкыч же бasin ачкыч
- Screwdriver (flathead or Phillips, depending on faucet handle)
- Сантехниктин скотчу (милдеттүү эмес, бурама туташтыруу үчүн)
Орнотуу кадамдары:
- Суу менен камсыздоону өчүрүү: Locate the main water shut-off valve for your home or the specific shut-off valves for the tub/shower. Turn them off completely to prevent water flow during installation.
- Дренаждык кран: Линиялардан калган сууну агызуу үчүн крандын туткаларын ачыңыз.
- Кран туткасын алып салуу: Use a screwdriver to remove the screw securing the faucet handle. Carefully pull the handle off the stem.
- Remove Trim Plate (if applicable): If there is a decorative trim plate, remove any screws holding it in place and set it aside.
- Remove Old Stem: Using an adjustable wrench, carefully unscrew the old faucet stem from the faucet body. Turn counter-clockwise. Be prepared for a small amount of residual water.
- Inspect Faucet Body: Clean any debris or mineral buildup from the faucet body's interior where the stem sits.
- Install New Stem: Insert the new Jones Stephens C07326 Stem into the faucet body. Ensure it is properly aligned.
- Tighten Stem: Hand-tighten the stem, then use the adjustable wrench to gently tighten it further. Do not overtighten, as this can damage the stem or faucet body.
- Кранды кайра чогултуу: Reattach the trim plate (if applicable) and the faucet handle.
- Суу менен камсыздоону калыбына келтирүү: Акырындык менен суу менен камсыздоону кайра күйгүзүңүз.
- Агышууларды текшерүү: Operate the faucet and carefully inspect for any leaks around the stem or handle area.
4. Иштөө нускамалары
The C07326 Stem functions as the internal mechanism that controls water flow and temperature within your Sayco tub and shower faucet. Once installed, its operation is integrated with the faucet handle. Turning the handle will rotate the stem, opening or closing the water passages to allow water to flow or stop, and to mix hot and cold water as designed by the faucet's original configuration.
5. Техникалык тейлөө
Proper maintenance can extend the life of your faucet stem and prevent future issues.
- Үзгүлтүксүз текшерүү: Periodically check the faucet for drips or leaks around the handle. Early detection can prevent minor issues from becoming major problems.
- Тазалоо: Avoid using harsh abrasive cleaners on faucet components, as these can damage the brass finish or rubber seals. Use a soft cloth and mild soap if cleaning is necessary.
- Катуу суу аймактары: In areas with hard water, mineral buildup can affect stem operation. If the handle becomes stiff, it may indicate a need for disassembly and cleaning of mineral deposits.
- Мөөрдү алмаштыруу: The bibb washer, cap gasket, and packing washer are wear items. If leaks persist after tightening, these seals may need to be replaced.
6. Кыйынчылыктарды
This section addresses common issues related to faucet stems.
Issue: Faucet Drips or Leaks from Spout
- Мүмкүн болгон себеп: Worn bibb washer or improper seating of the stem.
- Чечим: Ensure the stem is properly tightened. If the leak persists, the bibb washer may need replacement.
Issue: Leakage Around Faucet Handle Base
- Мүмкүн болгон себеп: Worn packing washer or cap gasket.
- Чечим: Tighten the packing nut slightly. If the leak continues, the packing washer or cap gasket may need to be replaced.
Issue: Faucet Handle is Stiff or Difficult to Turn
- Мүмкүн болгон себеп: Mineral buildup or overtightened packing nut.
- Чечим: Loosen the packing nut slightly. If the issue persists, disassemble the stem and clean any mineral deposits.
7. Техникалык шарттар
| Өндүрүүчү | Жонс Стивенс |
| Бөлүмдүн номери | C07326 |
| Элемент Салмагы | 4.5 унция |
| Продукциянын өлчөмдөрү | 1.88 x 1.25 x 0.26 дюйм |
| Материал | Жез |
| Түс | Жез |
| Шайкештик | Sayco tub and shower faucets (models 308 and T-308, 1968 to current) |
8. Кепилдик маалыматы
For specific warranty details regarding the Jones Stephens C07326 Stem, please consult the manufacturer's official website or the original purchase documentation. Warranty terms may vary based on retailer and purchase date.
9. Колдоо
If you require technical assistance, have questions about installation, or need further support for your Jones Stephens C07326 Stem, please contact Jones Stephens customer service through their official webсайты же продуктунун таңгагында берилген байланыш маалыматы.





