Introduction
Thank you for choosing the EVEO Premium Dual Monitor Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Designed for 14" to 35" screens, this mount enhances your workspace by providing flexible positioning and ergonomic benefits.
Figure 1: EVEO Premium Dual Monitor Mount in use.
Продукт өзгөчөлүктөрү
- Effortless Dual Monitor Setup: Designed for 14"-35" screens, compatible with VESA 75x75 and 100x100 mm patterns. Elevates monitors to reduce clutter and increase desk space.
- Тез жана оңой орнотуу: Offers straightforward setup in approximately 5 minutes. Supports both sturdy desk clamp (0.39"-3.22" thickness) and grommet mount (0.39"-2.67" thickness) options.
- ийкемдүү Viewбурчтар: Provides unparalleled flexibility with 360° rotation and +90° to -90° swivel for optimal screen positioning.
- Эргономикалык дизайн: Promotes optimal comfort by allowing users to maintain the perfect angle between eyes and monitors, alleviating neck and back strain.
- Акыркыга чейин курулган: Constructed from high-quality alloy steel for maximum sturdiness and durability.
Орнотуу жана орнотуу
The EVEO Dual Monitor Mount offers two primary installation methods: Desk Clamp and Grommet Mount. Choose the method that best suits your desk and preferences.
1. Кутудан чыгаруу жана компоненттерди текшерүү
Carefully unpack all components and verify against the packing list. Ensure all parts are present and undamaged before proceeding with installation.
Видео 1: Бүттүview of the EVEO Dual Monitor Mount and its components.
2. Attaching VESA Plates to Monitors
Attach the VESA plates to the back of your monitors using the provided screws. Ensure the plates are securely fastened to the VESA mounting holes (75x75mm or 100x100mm).
Figure 2: VESA plate attachment to the monitor arm.
3. Choosing Your Mount Type
3.1. Desk Clamp Орнотуу
For desks with a thickness between 0.39" and 3.22".
- Assemble the desk clamp база.
- Attach the anti-slip protective pads to the clamp surfaces to prevent damage to your desk.
- Клamp столуңуздун четине бекитип, бураманы бекемделгенче бекемдеңиз.
- Негизги устунду клапанга салыңызamp негизин коюп, бекитиңиз.
Video 2: Demonstration of the desk clamp орнотуу.
3.2. Grommet Mount Installation
For desks with a grommet hole and thickness between 0.39" and 2.67".
- Disassemble the desk clamp and reconfigure it for grommet installation.
- Insert the grommet base through the desk hole.
- Secure the base from underneath the desk using the provided plate and nut.
- Insert the main pole into the grommet base and secure it.
4. Attaching Monitor Arms
Slide the monitor arms onto the main pole. Adjust their height and orientation as needed before tightening the securing screws.
Figure 3: Monitor arm assembly and cable management.
Иштөө жана тууралоо
The EVEO monitor mount features a gas spring system for smooth and effortless adjustments.
1. Бийиктигин тууралоо
To adjust the monitor height, gently push or pull the monitor up or down. The gas spring will hold it in place. You may need to adjust the tension for heavier or lighter monitors.
Video 3: Demonstration of monitor arm height adjustment.
2. жантайып тууралоо
Мониторду жарыкты азайтуу жана оптималдаштыруу үчүн +90°тан -90°ка чейин кыйшайтса болот viewing angles. Loosen the tilt screw, adjust the angle, and then re-tighten.
Figure 4: Monitor tilt adjustment.
3. Swivel and Rotation
Swivel the monitor arms left or right for flexible positioning. The VESA plate also allows for 360° rotation, enabling easy switching between landscape and portrait modes.
Figure 5: Monitor swivel adjustment.
Figure 6: Monitor 360° rotation.
4. Кабелдик башкаруу
Utilize the integrated cable management clips along the arms to route and conceal your monitor cables, maintaining a tidy workspace.
Техникалык тейлөө
- Бардык бурамалар менен байланыштарды дайыма текшерип туруңуз, алар бекем жана коопсуз бойдон калууда.
- Clean the monitor arm surfaces with a soft, damp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан алыс болуңуз.
- If the gas spring tension feels too loose or too stiff, adjust it using the provided Allen wrench according to the instructions in the operating section.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Monitor sags or won't stay in position. | Монитордун салмагы үчүн газ пружинанын чыңалуусу өтө төмөн. | Increase gas spring tension using the adjustment screw. |
| Мониторду жылдыруу кыйын. | Газ пружинасы өтө жогору тартылып жатат. | Decrease gas spring tension using the adjustment screw. |
| Маунт туруксуз сезилет. | Clamp or grommet base is not tightened sufficiently. | Үстөлдү кайра бекемдөө clamp or grommet base screws. Ensure desk thickness is within specified range. |
| Monitor wobbles. | VESA plate or arm connections are loose. | Check and tighten all screws connecting the monitor to the VESA plate and the VESA plate to the arm. |
Техникалык шарттар
- Бренд: EVEO
- Модель номери: Dual Monitor arm
- Материал: Эритме болот
- Түсү: Кара
- Шайкеш монитордун өлчөмдөрү: 14 дюймдан 35 дюймга чейин
- VESA шайкештиги: 75x75 мм, 100x100 мм
- Монтаж түрү: Desk Clamp же Grommet Mount
- Desk Clamp Калыңдыгы диапазону: 0.39" - 3.22"
- Grommet Mount Thickness Range: 0.39" - 2.67"
- Кыймыл түрү: Артикуляциялоо
- Ийилген бурч: +90°тан -90°ка чейин
- Айлануу: 360°
- Айлануучу: +90°тан -90°ка чейин
- Элемент Салмагы: 8.51 фунт
- Пакеттин өлчөмдөрү: 16.89 x 11.61 x 4.88 дюйм
- Келип чыккан өлкө: Кытай
Кепилдик жана Кардарларды колдоо
EVEO stands behind the quality and durability of its products. For any questions, concerns, or support needs, please contact our customer service team. We are committed to providing outstanding customer support to ensure your experience is fulfilling.
Кепилдиктин чоо-жайын жана байланыш маалыматын алуу үчүн сатып алуу документтерин караңыз.
