Introduction
The Scosche VP2M-SP 2-in-1 FreeFlow mount is designed to securely hold your mobile device in your vehicle. It offers two primary mounting options: a vent mount for hands-free driving and a dash mount using an automotive-grade adhesive base. The mount features adjustable arms to accommodate various devices and a 360-degree rotating ball-joint for optimal viewing angles. Its open design ensures air can flow freely from your vehicle's vent.
Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- Dual-Rotating Mount
- Универсал кармоочу
- Жел чыгаруучу клип
- Quick Grip Universal Mount Head
- Колдонуучунун Колдонмосу (бул документ)
Орнотуу жана орнотуу
1. Vent Mount Installation
- Желдетүүчү клипти тиркөө: Ensure the vent clip is securely attached to the main mount body.
Сүрөттөмө: Жакын пландагы сүрөт view of the vent mount mechanism, highlighting the rubberized vent grip and vent stabilizer. The image shows how the mount attaches to a car's air vent.
- Insert into Vehicle Vent: Carefully slide the vent clip onto one of your vehicle's air vent louvers. Ensure it is firmly seated. The design allows for free airflow.
Description: The Scosche phone holder is shown installed on a car's dashboard vent, holding a smartphone in landscape orientation. The phone screen displays a map, indicating its use for navigation.
2. Dashboard Mount Installation (Optional)
For dashboard mounting, the QuickGrip Swing-Arm Universal Dash mount utilizes an automotive-grade adhesive base. This option provides a secure, semi-permanent attachment to your vehicle's dashboard.
- Бетти даярдоо: Clean the desired dashboard area thoroughly to ensure it is free of dust and grease.
- Apply Adhesive Base: Remove the protective backing from the adhesive disc on the dash mount. Firmly press the mount onto the cleaned dashboard surface for at least 30 seconds. Allow the adhesive to cure for 24 hours before attaching your device.
Иштөө нускамалары
1. Түзмөгүңүздү киргизүү
- Expand Arms: Gently pull apart the adjustable arms of the universal holder.
Description: The phone holder is depicted with a transparent overlay of a smartphone, illustrating how the adjustable arms expand to securely grip the device. The arms are designed to fit devices up to 3.5 inches wide.
- Жайгашкан түзмөк: Carefully place your smartphone between the expanded arms. The arms will automatically close to secure the device. The mount accommodates devices up to 3.5 inches wide.
2. Аппаратыңызды алып салуу
To remove your device, gently pull one of the adjustable arms outwards to release the phone. Use two hands if necessary to avoid dislodging the mount.
3. Жөнгө салуу Viewбурч
The mount features a 360-degree rotating ball-joint. Loosen the collar behind the mount head, adjust your device to the desired portrait or landscape orientation, and then tighten the collar to secure the position.
Description: The image shows the phone holder with a smartphone, demonstrating its ability to rotate 360 degrees for flexible viewing angles. Arrows indicate the rotational movement.
Техникалык тейлөө
- Keep the mount clean by wiping it with a soft, damp кездеме.
- Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонуудан алыс болуңуз, анткени алар финишке зыян келтириши мүмкүн.
- Periodically check the tightness of the vent clip or the adhesion of the dash mount to ensure secure attachment.
Проблемаларды чечүү
| Маселе | Мүмкүн себеп | Чечим |
|---|---|---|
| Mount is loose on vent. | Vent clip not fully engaged or vent louvers are too thin. | Ensure the vent clip is pushed firmly onto the vent louver. If the vent is too thin, try a different louver or consider the dash mount option. |
| Телефон бекем кармалган эмес. | Device width exceeds maximum capacity (3.5 inches) or arms are not fully closed. | Verify your device's width is within the 3.5-inch limit. Ensure the adjustable arms are allowed to close completely around the device. |
| Mount falls off dashboard. | Dashboard surface was not clean, or adhesive did not cure properly. | Re-clean the dashboard surface thoroughly. If using a new adhesive disc, allow 24 hours for it to cure before use. Ensure firm pressure was applied during installation. |
| Device rotates freely after adjustment. | Ball-joint collar is not tightened sufficiently. | Tighten the collar behind the mount head firmly after adjusting the viewбурч. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | VP2M-SP |
| Продукциянын өлчөмдөрү | 2.4 x 3.54 x 7.06 дюйм |
| Элемент Салмагы | 4.2 унция |
| Монтаж түрү | Vent, Dashboard |
| Өзгөчөлүктөр | Adjustable, 360° Rotation, FreeFlow Vent Design |
| Шайкеш түзмөктөр | Smartphones up to 3.5 inches wide |
Кепилдик жана колдоо
The Scosche VP2M-SP Universal Freeflow Vent/Dashboard Phone Holder is backed by Scosche's Lifetime Tech Support and a 3-Year Warranty.
For technical assistance or warranty claims, please contact Scosche customer support directly.
Өндүрүүчү: Scosche
