THINKWARE QA100Elite кош видеокамера колдонуучусунун колдонмосу

Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your THINKWARE QA100Elite Dual Dash Cam. The QA100Elite is an advanced dashboard camera system designed to record high-quality video footage from both the front and rear of your vehicle, ensuring comprehensive coverage during driving and parking.

Негизги өзгөчөлүктөрү

• 2K Front Camera & 1080P Rear Camera: Таза жана деталдуу тамак-ашты тартып алатtage.
• Sony Sensor: Enhances video quality, especially in low-light conditions.
• G-сенсор: Automatically detects impacts and saves event footage.
• Паркинг режими: Monitors your vehicle when parked, detecting impacts or motion.
• Камтылган Wi-Fi: Allows connection to the THINKWARE CONNECT app for easy access to footage and settings.
• Камтылган GPS: Records vehicle speed and location data.
• Түнкү көрүнүш: Improves visibility in dark environments.
• Цикл жаздыруу: Continuously records by overwriting the oldest fileэстутум картасы толгондо.

Пакеттин мазмуну

Please ensure all items are present in your package before proceeding with installation:

• THINKWARE QA100Elite Front Dash Cam Unit
• Арткы камера
• Арткы камераны туташтыруу кабели
• Vehicle Power Cable (Cigarette Lighter Adapter)
• Mounting Bracket with 3M Adhesive
• Адаптери менен 32 ГБ MicroSD картасы
• Кабелдик клиптер
• Колдонуучунун Колдонмосу (бул документ)

Продукт бүттүview

Familiarize yourself with the components of your THINKWARE QA100Elite dash cam system.

Image: The THINKWARE QA100Elite front dash camera unit shown from various perspectives, highlighting its compact design, front lens, control buttons, and connectivity ports. A "2K QUADHD" logo is visible, indicating its high-resolution recording capability.

Front Camera Components

• Алдыңкы линза: 2K QHD видео тартат.
• Баяндамачы: For audio alerts and voice guidance.
• MicroSD картасынын уячасы: Эстутум картасын киргизүү үчүн.
• Кубат киргизүү порту: Connects to the vehicle power cable.
• Rear Camera Port: Connects to the rear camera cable.
• GPS LED: Indicates GPS signal status.
• REC LED: Indicates recording status.
• Wi-Fi баскычы: Activates Wi-Fi for app connection.
• REC баскычы: Manually triggers event recording.
• MIC: Records audio inside the vehicle.

Rear Camera Components

• Арткы линза: 1080P Full HD видео тартат.
• Туташуу порту: Connects to the front camera via the provided cable.

Орнотуу жана орнотуу

Follow these steps for proper installation of your dash cam system.

1. MicroSD картасын салуу

1. Камера өчүрүлгөнүн текшериңиз.
2. Locate the MicroSD card slot on the side of the front camera unit.
3. Insert the provided 32GB MicroSD card into the slot until it clicks into place. Ensure the gold contacts face the correct direction (usually towards the front of the camera).

2. Алдыңкы камераны орнотуу

1. Clean the chosen area on your windshield thoroughly. The recommended location is typically behind the rearview тоскоол болбошу үчүн күзгү view.
2. Attach the mounting bracket to the front camera unit.
3. Peel off the protective film from the 3M adhesive on the mounting bracket.
4. Press the bracket firmly onto the windshield for at least 30 seconds to ensure a secure bond.
5. Adjust the camera angle to ensure the road ahead is clearly visible in the camera's view.

3. Арткы камераны туташтыруу

1. Арткы камераны арткы маңдайкы айнекке орнотуп, тазалыгын камсыз кылыңыз view.
2. Connect one end of the rear camera connection cable to the rear camera.
3. Route the cable neatly along the vehicle's headliner and A-pillars to the front camera. Use the provided cable clips to secure the cable.
4. Connect the other end of the rear camera cable to the designated port on the front camera unit.

4. Power Connection

1. Connect the vehicle power cable to the power input port on the front camera.
2. Plug the other end of the power cable into your vehicle's 12V cigarette lighter socket.
3. Route the power cable neatly to avoid interference with driving controls.

5. Баштапкы күйгүзүү

Once connected, start your vehicle. The dash cam should power on automatically and begin recording. Listen for voice prompts and observe the LED indicators.

Operation Guide

Негизги жаздыруу

• The QA100Elite automatically begins continuous recording when powered on.
• Footage is saved in short segments (e.g., 1 minute) and overwritten oldest first when the memory card is full (Loop Recording).
• The REC LED will blink during recording.

Паркинг көзөмөлдөө режими

The dash cam can monitor your vehicle while parked, provided it receives continuous power (e.g., via hardwiring kit, sold separately, or if your 12V socket is always on).

• Кыймылды аныктоо: Унаанын айланасында кыймыл аныкталганда жаздырат.
• Таасирди аныктоо: Records when an impact is detected.
• The dash cam automatically switches to Parking Mode when the vehicle's ignition is turned off.

Event Recording (G-Sensor)

• The built-in G-Sensor detects sudden impacts or changes in vehicle movement (e.g., collisions, hard braking).
• When an event is detected, the dash cam saves the current footage segment into a protected folder, preventing it from being overwritten by loop recording.
• You can also manually trigger an event recording by pressing the REC button on the unit.

Using the THINKWARE CONNECT App (Wi-Fi)

1. Download the "THINKWARE CONNECT" app from your smartphone's app store.
2. On the dash cam, press the Wi-Fi button to activate Wi-Fi mode. The Wi-Fi LED will illuminate.
3. On your smartphone, go to Wi-Fi settings and connect to the dash cam's Wi-Fi network (e.g., "Thinkware_XXXXXX"). The default password is "123456789".
4. Open the THINKWARE CONNECT app. You can now view жаша фооtage, download recorded videos, change settings, and update firmware.

GPS Функционалдуулугу

Интеграцияланган GPS модулу унааңыздын ылдамдыгын жана жайгашкан жеринин маалыматтарын жазып алат, аларды viewed during video playback using the THINKWARE PC Viewer software or the mobile app. The GPS LED indicates signal acquisition.

Техникалык тейлөө

MicroSD картаны форматтоо

Regularly formatting the MicroSD card (at least once a month) is crucial for optimal performance and to prevent recording errors. This can be done via the THINKWARE CONNECT app or the THINKWARE PC Viewпрограммалык камсыздоо.

• Колдонмо аркылуу: Connect to the dash cam via Wi-Fi, navigate to settings, and select "Format SD Card."
• PC аркылуу: Remove the MicroSD card, insert it into your computer using the adapter, and use the THINKWARE PC Viewer software to format it.

Аппаратты тазалоо

• Use a soft, dry cloth to wipe the exterior of the dash cam.
• For lenses, use a lens cleaning cloth to avoid scratches. Do not use harsh chemicals.

Орнотулган программаны жаңыртуу

Keep your dash cam's firmware updated to ensure the latest features and bug fixes. Firmware updates can be performed via the THINKWARE CONNECT app or by downloading the firmware file from the THINKWARE website and installing it via the MicroSD card.

Проблемаларды чечүү

If you encounter issues with your THINKWARE QA100Elite, refer to the table below for common problems and solutions.

Техникалык шарттар

Technical specifications for the THINKWARE QA100Elite Dual Dash Cam.

Кепилдик жана колдоо

THINKWARE products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official THINKWARE webсайт.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact THINKWARE customer support through their official webсайт же продукт таңгагында көрсөтүлгөн байланыш маалыматы.

Official THINKWARE Webсайт: www.thinkware.com