Antari Z-350 Fazer Machine User Manual

1. Киришүү

The Antari Z-350 Fazer Machine is a state-of-the-art device designed to produce dry haze effects for various applications. Utilizing advanced air pump technology, this unit ensures efficient haze generation and incorporates a self-cleaning function for enhanced longevity and performance. Its compact and lightweight design, combined with an extremely low fluid consumption rate, makes it an ideal choice for extended operation.

Сүрөт 1: Алдыңкы view of the Antari Z-350 Fazer Machine.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before operating the Antari Z-350 Fazer Machine. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Кубатты өчүрүү: Always disconnect the unit from the power supply before cleaning, servicing, or when not in use.
• Fluid Use: Use only Antari fog fluid. Do not add flammable substances or any other liquids to the fluid reservoir.
• Вентиляция: Ensure adequate ventilation around the unit during operation. Do not block any ventilation openings.
• Үй ичинде гана колдонуу: This machine is designed for indoor use only. Do not expose to rain or moisture.
• Сактагычты алмаштыруу: To reduce the risk of fire, replace the fuse only with the same size and type of fuse (T7A 250V).
• Operation without Fluid: Суюктуксуз иштебеңиз.
• Көзөмөл: Do not operate without adult supervision.
• Калифорния сунушу 65 Эскертүү: Бул өнүмдүн курамында Калифорния штаты ракка жана тубаса кемтиктерге же башка репродуктивдик зыяндарга алып келүүчү химиялык заттар болушу мүмкүн.

3. Продукциянын өзгөчөлүктөрү

• Орнотулган аба насосу: Produces dry haze and includes a self-cleaning function for the heater.
• DMX башкаруу: Features 5-pin DMX In/Out for integration with DMX consoles.
• Fluid Efficiency: Extremely low fluid consumption rate, allowing for extended operation (e.g., 430 minutes at maximum output with a 1.3 Liter tank).
• Heater Design: Larger diameter tube substantially reduces the risk of heater clog.
• Жөнгө салынуучу чыгаруу: Independent controls for haze output (smoke) and fan speed.

4. Орнотуу

Follow these steps to set up your Antari Z-350 Fazer Machine:

1. Жайгашкан жери: Place the machine on a stable, flat surface in a well-ventilated area. Ensure there is sufficient space around the unit for air circulation.
2. Суюктукту толтуруу: Unscrew the cap of the fluid reservoir located on the top of the unit. Carefully pour Antari fog fluid into the reservoir. Do not overfill. The fluid level indicator on the back of the unit will show the current level. Securely replace the cap.
3. Кубат туташуу: Connect the provided power cable to the "POWER INPUT" port on the rear of the machine and then to a suitable electrical outlet (120VAC, 50/60Hz).
4. DMX туташуусу (милдеттүү эмес): If using DMX control, connect your DMX console to the "DMX IN" port using a 5-pin DMX cable. You can daisy-chain to other DMX devices using the "DMX OUT" port.
5. Алыстан башкаруу (кошумча): If using a remote control, connect it to the "REMOTE CONTROL" jack.

2-сүрөт: Арткы view showing fluid level indicator, power input, and DMX connections.

5. Иштөө нускамалары

Түзмөк орнотулгандан кийин, аны иштетүү үчүн төмөнкү кадамдарды аткарыңыз:

1. Күйгүзүү: Flip the red "POWER" switch on the rear panel to the ON position. The switch will illuminate. The machine will begin to heat up automatically. Allow several minutes for the unit to reach operating temperature. The "STATUS" indicator will change when ready.
2. Adjust Haze Output: Use the "SMOKE" knob to adjust the desired level of haze output. Turning the knob clockwise increases the output.
3. Желдетүүчү ылдамдыгын жөндөө: Use the "FAN" knob to control the speed of the internal fan, which disperses the haze. Turning the knob clockwise increases the fan speed.
4. DMX башкаруу:
   • DMX Console OFF: If the DMX console is off, the unit will run its self-clean process and automatically turn off.
   • DMX Console ON: If the DMX console is on, the unit will turn on and start to heat up automatically.
   • DMX Function (Exampле):
     • CH 1: HAZE (0-4 = OFF, 5-255 = 1-100%)
     • CH 2: FAN (0-4 = 20%, 5-255 = 21-100%)
   • DIP которуу: Use the DMX512 DIP SWITCHes to set the DMX address as per your lighting system's requirements.
5. Өчүрүү: When finished, flip the "POWER" switch to the OFF position.

6. Техникалык тейлөө

Regular maintenance ensures optimal performance and longevity of your Fazer Machine:

• Өзүн-өзү тазалоо функциясы: The built-in air pump technology includes a self-cleaning function for the heater. This helps prevent clogs and maintains efficient operation.
• Суюктукту башкаруу: Always ensure there is sufficient Antari fog fluid in the reservoir during operation. Operating the machine without fluid can cause damage.
• Сактагыч: When storing the machine for extended periods, ensure the fluid reservoir is empty and the unit is clean and dry.
• Тышкы тазалоо: Түзмөктүн сыртын жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.

7. Кыйынчылыктарды

If you encounter issues with your Antari Z-350 Fazer Machine, consider the following common solutions:

• No Haze Output:
  • Кубат кабелинин бекем туташтырылганын жана кубат которгучу КҮЙҮК абалда экенин текшериңиз.
  • Verify that the fluid reservoir contains sufficient Antari fog fluid.
  • Allow adequate time for the unit to heat up. The "STATUS" indicator should confirm readiness.
  • Ensure the "SMOKE" knob is turned up.
  • If using DMX, check DMX connections and settings on your console.
• Weak Haze Output:
  • Ensure the "SMOKE" knob is set to maximum.
  • Суюктуктун деңгээлин текшериңиз.
  • The unit might require a longer warm-up time.
• Желдеткич иштебейт:
  • Ensure the "FAN" knob is turned up.
  • If using DMX, check DMX settings for the fan channel.
• адаттан тыш үндөр:
  • Аппараттын туруктуу бетинде экенин текшериңиз.
  • Check for any obstructions around the fan or output nozzle.

Эгерде көйгөйлөр чечилбесе, квалификациялуу тейлөө кызматкерлерине кайрылыңыз.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please contact Antari customer service or refer to the official Antari webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Эскертүү: Уруксатсыз оңдоолор же өзгөртүүлөр продуктунун кепилдигин жокко чыгарышы мүмкүн.