Introduction
This manual provides essential information for the setup, operation, and maintenance of your Numark Scratch 2-channel DJ Mixer and the included SoundSwitch DMX Micro Interface. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your experience.
Пакеттин мазмуну
- Numark Scratch DJ Mixer
- SoundSwitch DMX Micro Interface
- USB кабели
- Кубаттуу адаптер
- Software Download Cards (Serato DJ Pro, SoundSwitch)
- Колдонуучунун Колдонмосу (бул документ)
- Коопсуздук жана кепилдик боюнча колдонмо
Image: The Numark Scratch DJ Mixer shown alongside the SoundSwitch DMX Micro Interface and a DMX cable, representing the complete package contents.
Жайгашуу
Follow these steps to set up your Numark Scratch mixer and SoundSwitch DMX Micro Interface.
- Кубат туташуу: Connect the included power adapter to the Numark Scratch mixer and then to a power outlet.
- USB Connection (Mixer): Connect the Numark Scratch mixer to your computer using a USB cable. This connection enables control of Serato DJ Pro and audio routing.
- Аудио киргизүү каражаттары: Connect your turntables or media players to the LINE/PHONO inputs on the rear panel. Ensure the PHONO/LINE switch for each channel is set correctly according to your source.
- Аудио чыгуулар: Connect the MASTER output (XLR or RCA) to your sound system. Connect the BOOTH output (RCA) to your booth monitors if applicable.
- Микрофон киргизүү: If using a microphone, connect it to the MIC input on the front panel.
- Наушник: Connect your headphones to the 1/4" or 1/8" headphone jacks on the front panel.
- SoundSwitch DMX Micro Interface Connection: Connect the SoundSwitch DMX Micro Interface to an available USB port on your computer.
- DMX Lighting Connection: Connect a standard DMX cable from the SoundSwitch DMX Micro Interface to your DMX-compatible lighting fixtures.
- Программалык камсыздоону орнотуу: Install Serato DJ Pro and SoundSwitch software on your computer. Follow the instructions provided with your software download cards.
Сүрөт: бурчтуу view of the Numark Scratch DJ Mixer, illustrating its overall design and various connection points on the rear and top panels.
Иштөө нускамалары
Numark Scratch Mixer Controls
Сүрөт: Деталдуу жакындан тартылган сүрөт view of the Numark Scratch mixer's top panel, highlighting the various knobs, faders, performance pads, and effect controls.
- Күчөтүү баскычтары: Ар бир канал үчүн киргизүү деңгээлин тууралаңыз.
- EQ Knobs (Treble, Mid, Bass): Control the high, mid, and low frequencies for each channel.
- Фильтр туткалары: Apply high-pass or low-pass filters to each channel.
- Канал Faders: Control the volume of each channel.
- InnoFader Crossfader: The central fader for blending between channels. Features reverse and slope controls for customization.
- Reverse Switch: Flips the crossfader's left/right assignment.
- Slope Control: Adjusts the crossfader's curve from a smooth blend to a sharp cut.
- FX Select Buttons: Choose from 6 direct access effects (Echo, Delay, Flanger, Reverb, V. Echo, Phaser).
- Paddle Launch Triggers: Activate and hold selected effects.
- Dry/Wet FX Control: Adjust the intensity of the applied effect.
- Loop Knobs: Create instant loops of various lengths.
- Performance Pads: Access cue points, rolls, and samples within Serato DJ Pro. Use the Pad Mode button to cycle through different functions.
- Негизги том: Controls the overall output level to your main sound system.
- Буттун көлөмү: Controls the output level to your booth monitors.
- Headphone Cue/Mix: Adjusts the balance between the cued channel and the master output in your headphones.
- Гарнитуранын кирешеси: Adjusts the overall volume of your headphones.
SoundSwitch DMX Micro Interface Operation
The SoundSwitch DMX Micro Interface integrates with Serato DJ Pro to synchronize lighting effects with your music.
Image: The Numark Scratch mixer displayed with 'SoundSwitch Ready' text, emphasizing its compatibility and seamless integration with the SoundSwitch lighting software.
- Программалык камсыздоону интеграциялоо: Once connected and SoundSwitch software is running, the interface will automatically detect and control your DMX lighting fixtures.
- Автоматташтырылган жарыктандыруу: SoundSwitch can analyze your music and generate automated lighting scenes.
- Custom Lighting Displays: Use the SoundSwitch software to design and program custom lighting sequences that respond to your DJ performance.
- Көк LED көрсөткүч: The blue LED on the interface indicates a successful connection and data transmission.
Техникалык тейлөө
Тийиштүү техникалык тейлөө сиздин жабдууларыңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Use a soft, dry cloth to clean the exterior of the mixer and interface. Avoid abrasive cleaners or solvents.
- Чаңдан коргоо: Чаңдын топтолушуна жол бербөө үчүн колдонулбаган учурда аппаратты жаап туруңуз.
- Кабелдик башкаруу: Ensure all cables are neatly organized and not under strain to prevent damage.
- Сактагыч: Аппаратты күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
- Crossfader Maintenance: The InnoFader is designed for durability. If cleaning is required, consult a qualified technician or refer to specific InnoFader maintenance guidelines.
Проблемаларды чечүү
Эгер көйгөйлөргө туш болсоңуз, төмөнкү жалпы чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Аудио чыгышы жок | Incorrect cable connections, volume levels too low, incorrect input selection. | Verify all audio cables are securely connected. Check Master, Booth, and Channel volume knobs. Ensure PHONO/LINE switches are set correctly. Check audio settings in Serato DJ Pro. |
| Serato DJ Pro not recognizing mixer | USB cable issue, driver not installed, software not updated. | Try a different USB port or cable. Ensure Serato DJ Pro is updated to the latest version. Reinstall drivers if necessary. |
| SoundSwitch lighting not working | DMX cable issue, interface not connected, software not running, lighting fixtures not powered. | Check DMX cable connections. Ensure SoundSwitch DMX Micro Interface is connected to USB and its blue LED is active. Verify SoundSwitch software is running and configured correctly. Ensure lighting fixtures are powered on and in DMX mode. |
| Crossfader not responding correctly | Crossfader reverse or slope settings, physical obstruction. | Check the crossfader reverse and slope switches. Ensure no debris is obstructing the fader. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Numark |
| Модел | Scratch |
| Каналдардын саны | 2 |
| Crossfader | InnoFader with reverse and slope control |
| Эффекттер | 6 direct access effects (Echo, Delay, Flanger, Reverb, V. Echo, Phaser) |
| Байланыш технологиясы | USB |
| Аппараттык интерфейс | USB |
| Output Connector Type | USB Type B, XLR, RCA |
| Power Source | Электр зымдары |
| Камтылган программалык камсыздоо | Serato DJ Pro (with DVS License), SoundSwitch |
Кепилдик маалымат
Numark products are designed for reliability and performance. This product is covered by a limited warranty. For detailed warranty terms and conditions, please refer to the separate Warranty and Safety Manual included with your product or visit the official Numark webсайт.
Маанилүү: Keep your proof of purchase. It will be required for any warranty service.
Колдоо
For technical support, product registration, or to download the latest software and drivers, please visit the official Numark support webсайт:
Ошондой эле, колдоо барагынан көп берилүүчү суроолорду (FAQ) жана коомчулук форумдарын таба аласыз.
