Finder YESLY Roller Shutter Actuator User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of the Finder YESLY Roller Shutter Actuator, Model 13.S2.8.230.B000. This device is a multifunction electronic relay designed for controlling roller shutters and electric curtains within the YESLY system. It features Bluetooth 4.2 Low Energy connectivity for programming via the Finder Toolbox application and supports both wired and wireless button inputs.

Коопсуздук маалыматы

Сураныч, орнотуу жана иштетүү алдында бардык коопсуздук нускамаларын кылдаттык менен окуп чыгыңыз. Бул нускамаларды аткарбоо электр шокуна, өрткө же олуттуу жаракатка алып келиши мүмкүн.

• Орнотуу бардык жергиликтүү жана улуттук электр эрежелерине ылайык квалификациялуу электрик тарабынан аткарылышы керек.
• Ensure the main power supply is disconnected before performing any installation or maintenance work.
• Аппаратты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
• Verify correct wiring connections to prevent damage to the device or connected equipment.
• The device operates at 230V AC. Handle with extreme care.

Продукт бүттүview

The Finder YESLY Roller Shutter Actuator is a compact, flush-mountable device. Below is an image illustrating its key features and terminal connections.

Сүрөттүн сүрөттөлүшү: A white, rectangular Finder YESLY Roller Shutter Actuator (Model 13.S2.8.230.B000) is shown from a slightly elevated angle. The top surface displays the "Finder" logo, the model number "13.S2.8.230.B000", and electrical specifications: "Un 230V~" (Nominal Voltage 230V AC) and "6A230V~" (6 Amperes at 230V AC). A Bluetooth symbol is visible, indicating wireless connectivity. The "CE" mark and "Made in EU-01" are also present. Below these markings, six screw terminals are visible, labeled from left to right as P2, P1, CH2, CH1, L, and N. These labels correspond to inputs for wired buttons (P1, P2), motor control channels (CH1, CH2), and power supply (L for Line, N for Neutral). The device is designed for flush mounting, typically in a Ø 60 mm round box.

The device features two independent and programmable NO (Normally Open) contacts for motor control (CH1, CH2) and two inputs for wired push-buttons (P1, P2).

Орнотуу жана орнотуу

This actuator is designed for flush mounting, typically within a standard Ø 60 mm round electrical box.

Зымдарды орнотуу боюнча көрсөтмөлөр:

1. Электр камсыздоо: Connect the Line (L) conductor to the 'L' terminal and the Neutral (N) conductor to the 'N' terminal. Ensure the power supply is 230V AC.
2. Мотор туташуусу: Connect the motor's 'Up' control wire to the 'CH1' terminal and the motor's 'Down' control wire to the 'CH2' terminal. Refer to your motor's manual for specific wiring.
3. Wired Button Inputs: If using wired push-buttons, connect them to the 'P1' and 'P2' terminals. These inputs can be configured for various functions (e.g., Up/Down, Stop) via the Finder Toolbox app.
4. Коопсуз байланыштар: Ensure all screw terminals are tightened securely to prevent loose connections.

Initial Setup and Pairing:

• Download the "Finder Toolbox" application from your device's app store (available for iOS and Android).
• Смартфонуңузда же планшетиңизде Bluetooth иштетилгенин текшериңиз.
• Open the Finder Toolbox app and follow the on-screen instructions to discover and pair with your YESLY actuator. The device uses Bluetooth 4.2 Low Energy with 128-bit encrypted connection.
• Once paired, you can configure the actuator's parameters, including motor travel limits, button functions, and scene settings.

Иштөө нускамалары

The Finder YESLY Actuator can be operated in several ways:

• Via Wired Buttons: Use the physical push-buttons connected to P1 and P2 terminals to control the roller shutters/curtains (e.g., press for Up, press for Down, press again to stop). The exact behavior depends on the configuration set in the Finder Toolbox app.
• Via Wireless Buttons (Beyon): Pair compatible Finder Beyon wireless buttons (Type 013B9) with the actuator through the Finder Toolbox app. These buttons offer flexible placement and control.
• Via Finder Toolbox App: Use the dedicated mobile application to directly control the connected roller shutters/curtains, set schedules, create scenes, and manage other YESLY devices.

Техникалык тейлөө

The Finder YESLY Actuator is designed for long-term, maintenance-free operation. However, periodic checks can ensure optimal performance:

• Тазалоо: If necessary, gently wipe the device's exterior with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Туташуу текшерүү: Periodically (e.g., annually), with power disconnected, check that all wiring connections to the terminals remain secure.
• Программалык камсыздоонун жаңыртуулары: Check the Finder Toolbox app for any available firmware updates for the actuator to ensure you have the latest features and bug fixes.

Проблемаларды чечүү

If you encounter issues with your Finder YESLY Actuator, refer to the following common problems and solutions:

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official Finder webсайтка кайрылыңыз же жергиликтүү дистрибьютериңиз менен байланышыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.