1. Киришүү
This user manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell Power X-Change TE-SM 36/210 Li Cordless Miter Saw. As part of the Power X-Change series, this saw offers unparalleled flexibility and freedom from cords, making it ideal for various woodworking tasks, including miter and cross cuts, and even cutting parquet flooring to length.
Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its performance and lifespan.
Figure 1: The Einhell TE-SM 36/210 Li Cordless Miter Saw, a versatile tool for precise cuts.
2. Коопсуздук нускамалары
Электр шаймандарын иштетүүдө ар дайым коопсуздукка артыкчылык бериңиз. Бул нускамаларды аткарбоо олуттуу жаракатка же аспаптын бузулушуна алып келиши мүмкүн.
- Жеке коргонуу шаймандарын (ЖКК) кийиңиз: Дайыма коргоочу көз айнек, угууну коргоо жана чаң маскасын тагыныңыз.
- Коопсуз жумуш бөлүгү: cl колдонуңузamping device to firmly hold the workpiece in place before cutting.
- Таза иш аянтын сактоо: Keep the work area free of clutter and well-lit.
- Текшерүү бычак: Ensure the saw blade is sharp, clean, and correctly installed before each use.
- Ашыкча чектен чыгуудан качыңыз: Ар дайым туура бутту жана тең салмактуулукту сактаңыз.
- Кубатты өчүрүү: Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же аспапты сактоодон мурда ар дайым батарейканы алып салыңыз.
- Чаңды башкаруу: Utilize the dust bag or connect to a dust extractor to minimize airborne dust.
3. Орнотуу
3.1 Батареяны орнотуу
The TE-SM 36/210 Li operates on the Einhell Power X-Change system, requiring two 18V batteries (36V total) for optimal performance. It is recommended to use at least two 2.5 Ah PXC Plus rechargeable batteries.
- Араанын өчүрүлгөнүн текшериңиз.
- Align the battery packs with the battery slots on the saw.
- Slide the battery packs into the slots until they click securely into place.
- To remove, press the release button on each battery and slide them out.
Figure 2: Proper installation of the Power X-Change batteries into the saw.
3.2 X-Tend Table Extension
The saw features X-Tend supports that can be adjusted with one hand and without tools, providing stable support for wider workpieces.
- Locate the X-Tend supports on either side of the main table.
- Pull the supports outwards to extend them to the desired length.
- Ensure the workpiece is fully supported across the extended table for stability and accurate cuts.
Figure 3: Extending the X-Tend table for supporting longer workpieces.
3.3 Чаңды чогултуу
The saw comes with a sawdust bag and an adapter for connecting an external dust extractor, helping to keep your workspace clean.
- Attach the provided sawdust bag to the dust port at the rear of the saw.
- For more efficient dust extraction, connect a compatible dust extractor hose to the adapter.
4. Иштөө нускамалары
4.1 Күйгүзүү/өчүрүү
To start the saw, press the main power switch. Release the switch to turn off the saw.
4.2 Using LED Light and Laser Line
The integrated LED light and laser line ensure precise cuts, even in challenging lighting conditions.
- Locate the LED and Laser switches on the saw's handle.
- Press the respective buttons to activate the LED light for illumination and the laser line for guiding your cut.
Figure 4: The laser line provides a clear guide for accurate cutting.
4.3 Adjusting Angle Cuts (Miter)
The turntable allows for precise angle adjustments for miter cuts, ranging from -47° to +47°.
- Loosen the locking mechanism for the turntable.
- Rotate the turntable to the desired angle, indicated by the scale.
- Securely tighten the locking mechanism before making a cut.
Figure 5: The turntable allows for precise angle adjustments for miter cuts.
4.4 Конус кесүүлөрдү тууралоо
The saw head can be tilted up to 45° to the left for bevel cuts.
- Конусту жөндөө баскычын бошотуңуз.
- Аранын башын керектүү бурчка эңкейтиңиз.
- Tighten the knob to lock the head in position.
4.5 Жылдыруу функциясы
The smooth-running drag function is suitable for wider workpieces, allowing the saw head to slide forward and backward during the cut.
- Даярдоочу бөлүктүн бекем clampред.
- Lower the saw blade slightly into the workpiece.
- Push the saw head forward through the material, then pull it back to complete the cut.
4.6 Кесүү кубаттуулугу
The cutting capacity varies based on the battery capacity and the material being cut. The Power X-Change system allows for different battery sizes to be used, affecting the number of cuts per charge.
Figure 6: Approximate cutting capacity for laminated wood (195 x 8 mm) per battery charge.
Figure 7: Approximate cutting capacity for square wood (60 x 60 mm) per battery charge.
For optimal results, it is recommended to use higher capacity Power X-Change batteries.
4.7 Продукт Видео
Watch the official product video for a visual guide on the features and operation of the Einhell TE-SM 36/210 Li Cordless Miter Saw.
Video: Demonstrating the features and use of the Einhell TE-SM 36/210 Li Miter Saw, including battery installation, X-Tend table, laser guide, and various cuts.
5. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин митер арааңыздын узак мөөнөттүү жана оптималдуу иштешин камсыз кылат.
- Тазалоо: After each use, clean the saw thoroughly, especially around the blade area and dust port, to prevent sawdust buildup. Use a brush or compressed air.
- Бычакты алмаштыруу: Replace worn or damaged saw blades promptly. Always use a blade compatible with the saw's specifications and intended material. Refer to the blade replacement instructions in the full manual for detailed steps.
- Майлоо: Periodically lubricate moving parts as recommended in the comprehensive manual to ensure smooth operation of the sliding mechanism and angle adjustments.
- Сактагыч: Арааны кургак, коопсуз жерде, балдар жетпеген жерде сактаңыз.
6. Кыйынчылыктарды
Бул бөлүмдө сиз кескич араа менен кездешүүчү кеңири таралган көйгөйлөр каралат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сау башталбайт. | Batteries not installed correctly or discharged. | Батареялар толук заряддалганын жана туура салынганын текшериңиз. |
| Cuts are not straight or precise. | Dull blade, incorrect angle setting, or workpiece not secure. | Replace blade, re-check angle settings, and ensure workpiece is clampбекем ед. |
| Иштөө учурунда ашыкча чаң. | Dust bag full or not properly attached; dust extractor not connected or clogged. | Empty dust bag, check connections, or clear any blockages in the dust extraction system. |
| Saw motor overheats. | Overloading the saw, continuous heavy use. | Allow the saw to cool down. Avoid forcing the blade through material. |
If you encounter issues not listed here, please refer to the complete product manual or contact Einhell customer support.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | TE-SM 36/210 Li (4300880) |
| Тtage | 36 Volts (2x 18V Power X-Change) |
| Күч | 144 Ватт |
| Ылдамдык | 1900 об/мин |
| Blade Length | 30 сантиметр |
| Продукциянын өлчөмдөрү (L x W x Y) | 78.2 x 53 x 49 см |
| Салмагы | 12.57 килограмм |
| Өзгөчөлүктөр | Brushless motor, LED light, Laser line, X-Tend table supports |
| Компоненттер камтылган | Cordless sliding miter saw, precision carbide-tipped saw blade |
| Батареялар талап кылынат | Yes (2x 18V Power X-Change, not included for main power; 2x LR44 for laser/LED) |
| Бычактын материалы | Карбид |
| Сунушталган бет | Жыгач |
8. Кепилдик жана колдоо
Кепилдик жөнүндө маалымат алуу үчүн, сатып алууңуз менен кошо берилген документтерди караңыз же расмий Einhell дүкөнүнө баш багыңыз. webсайт. Техникалык колдоо, запастык бөлүктөр же тейлөө боюнча суроолор боюнча Einhell кардарларды тейлөө кызматына түздөн-түз кайрылыңыз.
Spare parts availability: Information unavailable.
Көбүрөөк маалыматты жана байланыш маалыматтарын расмий Einhell сайтынан таба аласыз webсайт: www.einhell.com
