GODOX FV150 High Speed Sync Flash LED Light

1. Киришүү

The GODOX FV150 is a versatile hybrid lighting unit designed for both continuous LED lighting and high-speed sync flash photography. It combines the functionality of a traditional LED light with advanced flash capabilities, offering strong power, abundant features, and various special effects modes for creative shooting scenarios.

2. Продукциянын өзгөчөлүктөрү

• Гибриддик функция: Operates as both a continuous LED light and a high-speed sync flash.
• Жогорку кубаттуулугу: 150W LED light with flash brightness four times that of the LED light, enhancing freezing capability for instantaneous action.
• Жогорку ылдамдыктагы синхрондоштуруу: Supports 1/8000s high-speed sync function.
• Үзгүлтүксүз атуу: Over 10 continuous flashes per second at full power and 8 continuous flashes per second in HSS mode.
• Түс температурасы: Stable 5600K color temperature.
• Жогорку түс тактыгы: CRI 96+ for accurate color rendering.
• Built-in Wireless Receiver: Integrated Godox 2.4G wireless receiver (X system) compatible with Canon, Nikon, Sony, Fujifilm, Panasonic, Olympus, and Pentax camera systems.
• Extensive Control: Supports 16 groups and 32 channels for individual unit control.
• Special Effects Modes: Features 8 FX special effects modes to simulate various shooting scenes.
• Өнүгүү LED: Precise 0% to 100% brightness dimming in LED continuous modes.
• Flash Power Adjustment: 1/8 to 1/1 or 7.0 to 10.0 power levels in flash modes, displayed as fractions or decimals.
• Боуэнс тоосу: Compatible with a wide range of Bowens mount light modifiers.
• Таза LCD дисплей: Large and clear LCD information panel for easy settings adjustment.
• Натыйжалуу жылуулук диссипациясы: Designed for continuous and rapid use without overheating.

3. Камтылган компоненттер

Төмөнкү нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1x GODOX FV150 Light Unit
• 1x Кубат Сымы
• 1x Алыстан башкаруу
• 1x Стандарттык чагылдыргыч
• 1x Лamp Cover
• 1x Pergear Cleaning Kit

Image: GODOX FV150 Light Unit with Standard Reflector attached.

4. Орнотуу

1. Жарыкты орнотуу: Attach the FV150 unit to a light stand using its U-type bracket. Secure it by tightening the adjustment knob on the bracket.
2. Туташуу күчү: Insert the power cord into the AC input port on the back of the unit and plug the other end into a suitable power outlet (AC100-240V, 50/60Hz).
3. Attaching Modifiers: The FV150 features a Bowens mount. Align your desired light modifier (e.g., standard reflector, softbox, beauty dish) with the mount and twist until it locks securely.
4. Lamp Мукаба: l камсыз кылууamp cover is removed before operation to prevent heat buildup.

Image: GODOX FV150 unit mounted on a light stand, showing the U-type bracket.

Image: GODOX FV150 with the standard reflector attached to the Bowens mount.

5. Иштөө нускамалары

5.1 Күйгүзүү/өчүрүү

Locate the ON/OFF switch on the back panel of the unit. Flip the switch to 'ON' to power on the light and to 'OFF' to power it down.

5.2 Mode Selection (LED / Flash)

басыңыз LED button on the left side of the control panel to switch between continuous LED mode and Flash mode. The current mode will be displayed on the LCD screen.

5.3 Adjusting Brightness / Power

• In LED Mode: айлантыңыз DIM knob (SET dial) on the right side of the control panel to adjust the brightness from 0% to 100%.
• In Flash Mode: айлантыңыз DIM knob (SET dial) to adjust the flash power output. Options include fractional settings (1/8 to 1/1) or decimal settings (7.0 to 10.0).

Image: Close-up of the GODOX FV150 LCD display showing power settings and control buttons.

5.4 Зымсыз башкаруу

The FV150 has a built-in Godox 2.4G wireless receiver. To use wireless control:

1. басыңыз GR/CH button to select the desired group (A-F, 0-9).
2. көпкө басыңыз GR/CH button to enter channel selection mode, then rotate the SET dial to select a channel (1-32).
3. Ensure your Godox 2.4G wireless trigger (e.g., XPro, X2T) is set to the same group and channel as the FV150.

Image: Diagram showing the GODOX FV150 with compatible wireless triggers (XPro, X2T) for remote control.

5.5 Special Effects (FX Modes)

In LED mode, press the FX button on the left side of the control panel to cycle through 8 special effects modes. Rotate the DIM knob to select the desired effect (e.g., Flash1, Storm1, TV, Bad Bulb).

Image: GODOX FV150 control panel displaying the 8 FX special effects modes.

5.6 Flash Sync and Anti-Preflash Function

• S1 режими: The flash will trigger synchronously when it receives an external flash.
• S2 Mode (Anti-Preflash): The flash is triggered synchronously when it receives the second flash, ignoring the pre-flash from another unit.

6. Техникалык тейлөө

• Аппаратты кургак кармаңыз. Нымдуу кол менен кармабаңыз.
• Clean the equipment regularly with a soft, dry cloth. Avoid using solvents or harsh cleaning agents.
• Аппаратты күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Protect the LED light source from impact.

7. Кыйынчылыктарды

• Light not powering on: Check if the power cord is securely connected and the ON/OFF switch is in the 'ON' position. Verify the power outlet is functional.
• Жарк этпейт: Ensure the unit is in Flash mode. Check the wireless trigger settings (group, channel, ID off) and battery. Press the 'TEST' button on the unit to confirm internal flash function.
• Туура эмес жарыктык: Verify power settings in both LED and Flash modes. Ensure no external factors are interfering with light output.
• Ашыкча ысып кетүү: If the unit feels excessively hot, power it off and allow it to cool down. Ensure proper ventilation around the unit.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided with your product or visit the official GODOX webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.