Defiant Hartford Aged Bronze Single Cylinder Keyed Entry Project Pack Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Defiant Hartford Aged Bronze Single Cylinder Keyed Entry Project Pack. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Коопсуздук маалыматы

• Орнотуу учурунда ар дайым коргоочу көз айнек сыяктуу тиешелүү коопсуздук шайманын тагыныңыз.
• Орнотуудан мурун, бардык компоненттердин бар экенин жана бузулбаганын текшериңиз.
• Do not modify the product or use it for purposes other than its intended use.
• Тумчугуп калуу коркунучун болтурбоо үчүн кичинекей бөлүктөрүн балдардан алыс кармаңыз.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• Single Cylinder Deadbolt (2 units)
• Keyed Entry Door Knob/Lever (2 units)
• Keys (multiple)
• Mounting Hardware (screws, strike plates, latches)
• Орнотуу шаблону

Сүрөт: бүттүview of the Defiant Hartford Aged Bronze Single Cylinder Keyed Entry Project Pack, showing two deadbolts and two door knobs/levers.

Орнотуу нускамалары

Follow these steps to install the Defiant Hartford lockset. A Phillips head screwdriver is typically required.

1. Эшикти даярдаңыз

Ensure your door has the standard bore holes. The lockset is designed for doors with a backset of 2-3/8 inches or 2-3/4 inches. The dual backset feature means no adjustment is needed for these common sizes.

Image: Diagram illustrating the dimensions of the lock components, including the 2-3/8" to 2-3/4" dual backset and a comparison of the Defiant Rose (2-13/16") which covers old paint, versus an Ordinary Rose (2-9/16") that does not.

2. Латчты орнотуңуз

1. Insert the latch into the edge bore hole of the door, ensuring the bevel of the latch bolt faces the door frame.
2. Берилген бурамалар менен кулпуну бекитиңиз.

3. Сырткы монтажды орнотуңуз

1. For the deadbolt, insert the exterior cylinder into the upper bore hole.
2. For the knob/lever, insert the exterior half into the lower bore hole, ensuring the spindle aligns with the latch mechanism.

4. Ички жыйынды орнотуу

1. Align the interior assembly with the exterior assembly and the latch.
2. Secure the interior assembly with the provided screws, tightening them evenly.

5. Install the Strike Plates

1. Mark the position for the strike plates on the door frame, aligning with the latch bolts.
2. Chisel out a shallow recess for each strike plate if necessary, then secure them with screws.

Image: A Defiant Hartford Aged Bronze single cylinder deadbolt and keyed entry knob installed on a light-colored wooden door, showing the interior view with the strike plates on the door frame.

6. Сыноо операциясы

After installation, test both the deadbolt and the knob/lever with the key from the exterior and the thumb turn/button from the interior to ensure smooth operation.

Иштөө нускамалары

Keyed Entry Knob/Lever

• Бекитүү: From the interior, press the button on the knob/lever. From the exterior, insert the key and turn to lock.
• Кулпуну ачуу үчүн: From the interior, turn the knob/lever. From the exterior, insert the key and turn to unlock.

Жалгыз цилиндр Deadbolt

• Бекитүү: From the interior, turn the thumb turn. From the exterior, insert the key and turn to lock.
• Кулпуну ачуу үчүн: From the interior, turn the thumb turn. From the exterior, insert the key and turn to unlock.

Техникалык тейлөө

• Тазалоо: Clean the lockset with a soft, damp кездеме. Абразивдүү тазалагычтардан же эриткичтерден алыс болуңуз, анткени алар финишке зыян келтириши мүмкүн.
• Майлоо: Periodically apply a small amount of graphite lubricant to the keyway to ensure smooth operation. Do not use oil-based lubricants.
• Текшерүү: Regularly check all screws and components for tightness. Tighten any loose screws to maintain security and function.

Проблемаларды чечүү

Problem: Key is difficult to insert or turn.

Чечим: Apply graphite lubricant to the keyway. Check for any debris obstructing the keyway. Ensure the key is not bent or damaged.

Problem: Latch bolt does not extend or retract smoothly.

Чечим: Check if the strike plate is properly aligned with the latch bolt. Ensure all mounting screws are tightened correctly and not causing binding. Lubricate the latch mechanism if necessary.

Problem: Door knob/lever is loose.

Чечим: Tighten the mounting screws that secure the interior and exterior assemblies. Refer to installation step 4.

Техникалык шарттар

Кепилдик жана колдоо

Defiant products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details or technical assistance, please refer to the warranty card included with your product or contact Defiant customer support.

Кардарларды колдоо: For assistance, please contact Defiant customer service. Contact information can typically be found on the product packaging or the manufacturer's official webсайт.