KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Introduction

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Фронт view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Сүрөт: алдыңкы view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Орнотуу жана программалоо

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Программалоо кадамдары:

  1. Open the driver's side door of your vehicle.
  2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. Башкаруу баскычын басыңыз жети жолу. боюнча eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the Кулпу button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Башкаруу баскычын коё бериңиз.
  7. от алдыруу ачкычын бургула ӨЧҮРҮҮ жайгаштырыңыз жана аны алып салыңыз.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Видео: Кыскачаview of KeylessOption Key Fob Remotes for Viper systems.

Иштөө нускамалары

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

Бурчтуу view of the KeylessOption Key Fob, showing the side profile жана баскычтын жайгашуусу.

Сүрөт: бурчтуу view of the KeylessOption Key Fob, highlighting its ergonomic design.

Техникалык тейлөө

Батареяны алмаштыруу:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a prying tool.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. Snap the remote casing кайра бекем бириктирилет.
Артка view of the KeylessOption Key Fob, showing the smooth casing.

Сүрөт: Артка view of the KeylessOption Key Fob, indicating where the casing батареяга жетүү үчүн ачылышы мүмкүн.

Проблемаларды чечүү

Техникалык шарттар

БрендKeylessOption
Модель номериEZSDEI7141 474V
Шайкеш түзмөктөрViper Aftermarket Alarm System
FCC IDEZSDEI7141
баскычтардын саны4 (Lock, Unlock, Aux, Panic)
Элемент Салмагы0.634 унция
Пакеттин өлчөмдөрү6.77 x 4.65 x 0.47 дюйм

Кепилдик жана колдоо

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webсайт.

KeylessOption Warranty Card

Image: KeylessOption Warranty Card, included with each purchase.

Тектеш документтер - EZSDEI7141 474V

Preview Directed 474T 1-Way 4-Button Remote Control
Replacement 1-Way 4-Button Remote Control for Directed systems and compatible Avital, Clifford, and other brands. Features include CR2032 battery, 434Mhz frequency, and 1/4-mile range.
Preview Алыстан башкаруунун шайкештиги жана алмаштыруу боюнча колдонмо
Автоматташтыруу, Клиффорд, Випер жана башка көптөгөн бренддерде алыстан башкаруу моделдерин, бөлүктөрдүн номерлерин, дата коддорун жана шайкеш алмаштыруу пульттарын деталдаштыруучу кеңири маалымдама колдонмо. FCC ID кайчылаш шилтемеси үчүн бөлүмдү камтыйт.