Dorman 921-149 май чыпкасынын капкагын колдонуу боюнча колдонмо

Introduction

This manual provides instructions for the Dorman 921-149 Oil Filter Cap, a direct replacement component designed for specific Volvo models. It is engineered to match the fit and function of the original equipment cap, ensuring a reliable repair for your vehicle's oil filtration system.

Продукт бүттүview

This image displays the Dorman 921-149 Oil Filter Cap. It is a black plastic component featuring a hexagonal top for wrench application, a ribbed body, and a cage-like structure at the bottom, designed to house the oil filter element.

Негизги өзгөчөлүктөрү:

• Ideal replacement - this engine oil filter cover is a direct replacement for the original equipment filter cover
• Durable construction - this part is specifically designed to withstand extreme underhood temperatures to resist cracking and leaking
• Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
• Easy to install - no special tools required
• Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

Эмне камтылган:

• 1 Oil Filter Cap

Унаа шайкештиги

This oil filter cap is compatible with the following Volvo models. Always verify fitment using your vehicle's make, model, and trim level.

• Volvo C30: 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Volvo C70: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Volvo S40: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
• Volvo S60 Cross Country: 2016
• Volvo S60: 2012, 2013, 2014, 2015, 2016
• Volvo V50: 2005, 2006, 2007, 2008, 2009, 2010, 2011
• Volvo V60 Cross Country: 2015, 2016
• Volvo V60: 2015, 2016
• Volvo XC60: 2015, 2016
• Volvo XC70: 2016

Орнотуу нускамалары

The installation of the Dorman 921-149 Oil Filter Cap is designed to be straightforward and typically does not require specialized tools. Follow these general steps:

1. Ensure the engine is cool and the vehicle is on a level surface.
2. Locate the existing oil filter cap on your vehicle's engine.
3. Carefully remove the old oil filter cap. Note the orientation and any associated O-rings.
4. Install the new Dorman 921-149 Oil Filter Cap, ensuring the O-ring is properly seated.
5. Tighten the cap to the manufacturer's specified torque. Overtightening or undertightening can lead to leaks.
6. After installation, check for any oil leaks.

Маанилүү: Refer to your vehicle's service manual for specific torque specifications and detailed oil change procedures.

Техникалык тейлөө

The oil filter cap itself requires minimal maintenance. During each oil change, inspect the cap for any signs of cracking, stripping, or damage. Ensure the O-ring is in good condition and properly seated to prevent oil leaks. Replace the cap if any damage is observed.

Проблемаларды чечүү

Орнотуудан кийин майдын агып кетиши:

• Incorrect O-ring Seating: Ensure the O-ring is correctly positioned in its groove and not pinched or twisted.
• Туура эмес момент: Verify the oil filter cap is tightened to the vehicle manufacturer's recommended torque specification. Both undertightening and overtightening can cause leaks.
• Шайкештик маселеси: Double-check that the Dorman 921-149 is the correct part for your specific vehicle model and year using a reliable fitment tool. Some vehicle variations may require a different cap.
• Damaged Cap: Inspect the cap for any manufacturing defects or damage that might prevent a proper seal.

Продукт спецификациялары

Кепилдик жана колдоо

For warranty information or technical support regarding the Dorman 921-149 Oil Filter Cap, please refer to the official Dorman webсайтына же Dorman кардарларды тейлөө кызматына түздөн-түз кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.