1. Киришүү
Welcome to the user manual for your Nolan N33 Evo Classic helmet. This open-face helmet is designed for both scooter and motorcycle use, offering a blend of compact design and advanced technical features. It features an ultra-wide visor, a VPS (Vision Protection System) sun shield, and an efficient ventilation system to enhance your riding experience.
The wide, scratch-resistant visor provides enhanced visibility, including peripheral vision, ensuring maximum riding comfort and active safety. It also protects the rider's face from wind and water while maintaining good air circulation inside the helmet.
Figure 1.1: Nolan N33 Evo Classic Helmet in blue. This image illustrates the overall design of the helmet.
2. Коопсуздук маалыматы
Your helmet is a crucial piece of safety equipment. Always read and understand all instructions before using your helmet.
- Туура ылайыктуу: Туулга бекем жана ыңгайлуу отурганын текшериңиз. Ал башыңызда эркин кыймылдабашы керек.
- Сактоо системасы: Always fasten the micrometric buckle securely under your chin. The strap should be tight enough that the helmet cannot be pulled off.
- Көз айнектин колдонулушу: Keep the visor clean and free from obstructions. Use the visor for eye protection during riding.
- Зыянды текшерүү: Regularly inspect your helmet for any signs of damage, such as cracks, dents, or worn straps. A damaged helmet must be replaced immediately.
- Таасири: Even if a helmet appears undamaged after an impact, its protective capabilities may be compromised. It is recommended to replace a helmet after any significant impact.
- Химиялык заттар: Avoid contact with gasoline, cleaning fluids, paints, or other solvents, as they can damage the helmet's materials and compromise its protective properties.
3. Components Overview
Familiarize yourself with the main components of your Nolan N33 Evo helmet:
- Сырткы кабык: Made from durable thermoplastic polycarbonate.
- Ultra-Wide Visor: Scratch-resistant (S/R) for clear vision and protection. Features a quick-release mechanism.
- VPS Sun Shield: Integrated internal sun visor for glare reduction.
- Вентиляция системасы: Designed for efficient airflow to keep you cool and comfortable.
- Сактоо системасы: Micrometric buckle for secure and easy fastening.
- Ички толтуруу: Гигиена жана ыңгайлуулук үчүн алып салууга жана жууганга болот.
Figure 3.1: Illustrative image showing the helmet's visor and integrated sun shield. (Note: This image is for illustrative purposes, using the main product image due to lack of specific component images.)
4. Орнотуу жана тууралоо
4.1. Көз айнекти орнотуу жана алып салуу
The N33 Evo features a quick-release visor mechanism for easy removal and installation.
- Алып салуу: Open the visor fully. Locate the quick-release levers on both sides of the helmet near the visor pivots. Follow the specific instructions in the included printed manual for your model to disengage the visor.
- Орнотуу: Align the visor's pivot points with the helmet's mechanism. Press firmly until you hear a click, indicating it is securely locked in place. Test the visor's movement to ensure proper installation.
Figure 4.1: Illustrative image of the helmet's side, indicating the general area of the visor quick-release mechanism. (Note: This image is for illustrative purposes, using the main product image due to lack of specific component images.)
4.2. VPS Sun Shield Operation
The integrated VPS sun shield can be deployed or retracted as needed to adapt to varying light conditions.
- Жайгаштыруу: Locate the slider mechanism on the left side of the helmet. Slide it forward to lower the sun shield.
- Артка тартуу: Slide the mechanism backward to retract the sun shield into the helmet shell.
4.3. Retention System Adjustment (Micrometric Buckle)
The micrometric buckle ensures a secure and adjustable fit.
- Бекитүү: Insert the toothed strap into the buckle until it clicks securely.
- Катуулоо: Pull the strap to achieve a snug fit under your chin.
- Releasing: Lift the red lever on the buckle to release the strap.
- Жөнгө салуу: The length of the chin strap can be adjusted for a personalized fit. Ensure the strap is not twisted.
Figure 4.2: Illustrative image of the helmet's chin strap area, indicating the micrometric buckle. (Note: This image is for illustrative purposes, using the main product image due to lack of specific component images.)
5. Иштөө нускамалары
5.1. Туулга кийүү
- Hold the helmet by the chin straps with the open side facing you.
- Grasp the chin straps and pull them apart to widen the helmet opening.
- Slide the helmet onto your head, ensuring it sits level and covers your forehead.
- Adjust the helmet so it feels snug and comfortable, without excessive pressure points.
5.2. Securing the Retention System
After placing the helmet on your head, always secure the micrometric buckle.
- Fasten the buckle as described in Section 4.3.
- Ensure the strap is tight enough that you cannot remove the helmet by pulling it from the back or front. It should not cause discomfort or restrict breathing.
6. Техникалык тейлөө жана кам көрүү
6.1. Сырткы кабыкты тазалоо
Clean the polycarbonate outer shell with a soft cloth, warm water, and mild soap. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and material integrity. Rinse thoroughly and dry with a soft, clean cloth.
6.2. Cleaning the Visor and VPS Sun Shield
The visor and sun shield are scratch-resistant but can still be damaged by improper cleaning.
- Rinse with lukewarm water to remove loose dirt and dust.
- Gently clean with a soft, lint-free cloth and mild soap solution.
- Rinse thoroughly and pat dry with a clean, soft cloth. Do not rub vigorously.
- Never use paper towels, abrasive cloths, or chemical cleaners on the visor or sun shield.
6.3. Cleaning the Inner Padding
The inner padding is removable for cleaning.
- Carefully remove the padding components according to the instructions in your printed manual.
- Hand wash in cold water with a mild detergent. Do not machine wash or tumble dry.
- Allow to air dry completely before re-installing into the helmet.
6.4. Сактоо
Шлемиңизди күн нурунан жана экстремалдык температурадан алыс, салкын, кургак жерде сактаңыз. Чаңдан жана чийилүүдөн коргоо үчүн каска баштыгын колдонуңуз. Туулганы химиялык заттардын же эриткичтердин жанында сактабаңыз.
7. Кыйынчылыктарды
-
Көз айнекти тумандатуу:
Ensure the helmet's ventilation system is open. If fogging persists, consider using an anti-fog treatment or a Pinlock® anti-fog insert (if compatible and available for your model).
-
Ыңгайсыздык же басым чекиттери:
Check the helmet size and fit. A helmet that is too tight or too loose can cause discomfort. Ensure the inner padding is correctly seated. If discomfort persists, consult with a helmet specialist.
-
Visor Not Operating Smoothly:
Check for dirt or debris around the visor mechanism. Clean the mechanism carefully. If the issue continues, inspect for damage or wear on the pivot points.
-
Сактоо системасындагы көйгөйлөр:
Ensure the micrometric buckle is clean and free of debris. If the buckle is difficult to fasten or release, inspect for damage. Do not force the mechanism.
8. Техникалык шарттар
| Модель аты: | N33 |
| Модель номери: | N3V0001030117 |
| Өндүрүүчү: | NOLAN |
| Outer Shell Material: | Thermoplastic Polycarbonate |
| Visor өзгөчөлүктөрү: | Ultra-wide, Scratch-resistant (S/R), Quick-release mechanism |
| Күндөн коргоочу: | Integrated VPS (Vision Protection System) |
| Сактоо системасы: | Micrometric buckle |
| Салмагы: | Болжол менен 1.5 килограмм |
| Сертификаттар: | ECE |
| Белгиленген курактык топ: | бойго жеткен |
9. Кепилдик жана колдоо
For specific warranty information, please refer to the warranty card included with your helmet or visit the official Nolan Helmets webсайт.
For technical support, spare parts, or any other inquiries, please contact your authorized Nolan dealer or the manufacturer directly.
Өндүрүүчү: NOLAN
Webсайт: www.nolan.it (Иллюстративдик шилтеме)





