Introduction
Welcome to the ROBOTIME Corsac M60 3D Wooden Puzzle Rubber Band Gun Model. This manual provides detailed instructions for assembling and operating your wooden model kit. Designed for enthusiasts aged 14 and up, this kit offers an engaging building experience without the need for glue.
Коопсуздук маалыматы
This product is a model toy designed to fire rubber bands. All projectiles are rubber bands, with a typical range of 3-5 meters. It is designed to be safe and should not cause injury when used as intended. Always aim away from faces and eyes. Keep small parts away from young children to prevent choking hazards. The wooden components are precision-cut from eco-friendly materials.
Пакеттин мазмуну
Before beginning assembly, verify that all components are present. Your kit should include:
- Pre-cut wooden sheets with various parts
- Каучуктар
- Кененирээк чогултуу көрсөтмөсү
- Extra pieces for some fragile components
- Sandpaper or file (may be included for smoothing edges)

Монтаждоо көрсөтмөлөрү
Follow these step-by-step instructions carefully. No glue is required for assembly.
- Даярдоо: Carefully detach all wooden pieces from their sheets. Use sandpaper or a file (if included) to smooth any rough edges.
- Бөлүктөрдү аныктоо: Refer to the included assembly guide to identify each part by its number or shape.
- Interlocking Assembly: Connect the pieces according to the diagrams in the manual. Ensure a snug fit for all interlocking components.
- Mechanism Assembly: Pay close attention to the assembly of the trigger, hammer, and cylinder mechanisms to ensure proper function.


Иштөө нускамалары
Once assembled, your Corsac M60 model is ready for use.
- Жүктөө: Place a rubber band over the front barrel and pull it back to hook it onto the hammer mechanism.
- Атуу: Aim the model at a safe target. Pull the trigger to release the rubber band.
- Диапазон: The typical firing range is approximately 3-5 meters.

Техникалык тейлөө
To ensure the longevity of your wooden model, follow these maintenance guidelines:
- Тазалоо: Wipe the model with a dry, soft cloth to remove dust. Avoid using liquids or harsh chemicals.
- Сактагыч: Store the model in a dry environment, away from direct sunlight or extreme temperature changes, to prevent wood warping or damage.
- Бөлүктү алмаштыруу: In case of minor breakage, small pieces can often be reattached with wood glue (not included). The kit includes extra pieces for some fragile components.
Проблемаларды чечүү
- Маселе: Rubber bands do not fire or mechanism jams.
Чечим: Check that all moving parts (trigger, hammer, cylinder) are assembled correctly and move freely. Ensure the rubber band is properly seated on both the barrel and the hammer mechanism. - Маселе: Parts are difficult to fit together.
Чечим: Gently sand the edges of the interlocking parts if they are too tight. Do not force pieces, as this may cause breakage. - Маселе: A wooden part breaks during assembly.
Чечим: Refer to the extra pieces provided in the kit. If a critical piece is broken and no spare is available, contact customer support.
Техникалык шарттар
| Продукциянын өлчөмдөрү | 8.66 x 1.5 x 0.1 дюйм |
| Элемент Салмагы | 10.8 унция |
| Элемент моделинин номери | Corsac M60 |
| Өндүрүүчү | ROBOTIME |
| Өндүрүүчүнүн сунуш кылган курагы | 14 жаш жана андан жогору |
Кепилдик жана колдоо
For any questions, missing parts, or support regarding your ROBOTIME Corsac M60 model, please contact ROBOTIME customer service through their official website or the retailer where the product was purchased. Please have your model number (Corsac M60) and purchase details ready.





