Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your FibroPool 2 HP Swimming Pool Pump (Model FP200). Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage or injury.
The FibroPool FP200 is a high-efficiency single-speed motor pump designed for in-ground pools and spas. It features a durable, corrosion-proof construction and is engineered for reliable performance.
Коопсуздук маалыматы
Always observe basic safety precautions when installing and operating this electrical equipment. Failure to follow instructions can result in serious injury or death.
- Ensure the pump is connected to a 240-volt, 60 Hz power supply only. It is not convertible to 120 volts.
- Орнотуу квалификациялуу адис тарабынан аткарылышы керек жана бардык жергиликтүү жана улуттук электр жана сантехникалык эрежелерге ылайык келиши керек.
- Кандайдыр бир тейлөө же техникалык тейлөө иштерин жүргүзүүдөн мурун, насосту ар дайым электр кубатынан ажыратыңыз.
- Do not run the pump dry. Ensure the pump is primed with water before starting.
- Балдарды насос жана бассейн жабдууларынын аймагынан алыс кармаңыз.
- Do not operate the pump if any parts are damaged or missing.
Продукт бүттүview
The FibroPool FP200 pump is engineered for optimal performance and longevity. Key features include:
- 2 horsepower motor, pushing up to 8100 GPH at 3450 RPM.
- High-efficiency single-speed motor designed to reduce energy consumption.
- Durable, weatherproof chassis suitable for various environments.
- Integrated pedestal base for stable mounting.
- Super-sized 124 cubic-inch strainer basket with a clear twist-lock lid for easy inspection and cleaning.
- 2-inch unions included for simplified installation and servicing.

1-сүрөт: Каптал view of the FibroPool FP200 Swimming Pool Pump, showing the motor and pump housing.

Сүрөт 2: Карама-каршы тарап view of the FibroPool FP200 Swimming Pool Pump, highlighting the clear strainer lid.
Орнотуу
Proper installation is crucial for the pump's performance and longevity. It is recommended that installation be performed by a certified pool technician or electrician.
Сайт тандоо
- Install the pump as close to the pool as possible to minimize friction loss from plumbing.
- Ensure the location is well-ventilated and protected from direct sunlight and excessive moisture.
- Provide adequate space around the pump for routine maintenance and servicing.
- Mount the pump on a solid, level base to prevent vibration and noise. The integrated pedestal base provides stability.
Сантехника байланыштары
- The pump is equipped with 2-inch unions for easy connection to your existing plumbing system.
- Use appropriate PVC cement and primer for secure, leak-free connections.
- Ensure all plumbing is properly supported to avoid strain on the pump.
Электр байланыштары
ЭСКЕРТҮҮ: Electrical wiring should only be performed by a licensed electrician.
- The FibroPool FP200 operates on 240 volts, 60 Hz. Verify your power supply matches these requirements.
- Connect the pump to a dedicated circuit protected by a Ground Fault Circuit Interrupter (GFCI).
- The pump includes a 6-foot weatherproof power cable. Ensure all connections are secure and weatherproof.
- Refer to local electrical codes for specific wiring requirements.

3-сүрөт: Артка view of the FibroPool FP200 pump, showing the electrical connection box and wiring.
Иштөө нускамалары
Насосту толтуруу
Before starting the pump for the first time, or after draining for maintenance, the pump must be primed.
- Ensure all valves are open to allow water flow from the pool to the pump.
- Remove the clear twist-lock lid from the strainer basket.
- Fill the strainer basket with water until it overflows.
- Replace the lid, ensuring it is securely twisted and sealed.
- Turn on the pump. The pump should prime within a few minutes. If not, turn off the pump, re-prime, and check for air leaks in the suction line.
Кадимки операция
- Once primed, the pump will circulate water through your pool system.
- Monitor the pressure gauge on your filter system to ensure it is within the normal operating range.
- The clear top lid allows for easy visual inspection of the strainer basket to determine when cleaning is needed.
Техникалык тейлөө
Regular maintenance ensures the longevity and efficient operation of your FibroPool pump.
Сүзгүч себетти тазалоо
The super-sized 124 cubic-inch basket has extra leaf-holding capacity, extending time between cleanings. However, regular inspection is recommended.
- Насосту өчүрүп, электр розеткасынан ажыратыңыз.
- Twist and remove the clear lid from the strainer housing.
- Remove the basket and empty any debris.
- Себетти суу менен жакшылап чайкаңыз.
- Капкактагы О-шакекчеде жаракалар же эскирүүлөр бар-жогун текшериңиз. Зарыл болсо, алмаштырыңыз.
- Return the basket to the housing, ensuring it is seated correctly.
- Replace the lid, twisting it securely to create a watertight seal.
- Re-prime the pump if necessary before restarting.
Кышка даярдык
In areas subject to freezing temperatures, proper winterization is essential to prevent damage.
- Дренаждык тыгындарды алып салуу менен насостон бардык сууну төгүп салыңыз.
- Store the pump in a dry, protected area if possible.
- Consult a pool professional for comprehensive winterization procedures for your entire pool system.
Проблемаларды чечүү
This section provides solutions to common issues you may encounter with your FibroPool pump.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт | No power, tripped breaker/GFCI, faulty wiring, motor issue. | Check power supply, reset breaker/GFCI. Verify electrical connections. If motor hums but doesn't start, contact a qualified technician. |
| Pump runs but does not prime or has low flow | Air leak in suction line, clogged strainer basket, low water level in pool, closed valves, impeller obstruction. | Check and seal all suction line connections. Clean strainer basket. Ensure adequate pool water level. Open all necessary valves. Inspect impeller for debris. |
| Ашыкча ызы-чуу же титирөө | Air leak, cavitation, loose mounting, worn bearings. | Check for air leaks. Ensure pump is properly primed. Tighten mounting bolts. If noise persists, motor bearings may be worn; contact service. |
| насостон суу агып жатат | Loose plumbing connections, worn shaft seal, damaged O-rings. | Tighten plumbing connections. Inspect and replace O-rings on strainer lid and unions. A leaking shaft seal requires professional service. |
Техникалык шарттар
Detailed technical specifications for the FibroPool 2 HP Swimming Pool Pump FP200.
| Атрибут | Нарк |
|---|---|
| Бренд | FibroPool |
| Модель номери | FP200 |
| Ат күчү | 2 HP |
| Тtage | 240 вольт |
| Жыштык | 60 Гц |
| Ватtage | 1.5 кВт |
| Максималдуу агым ылдамдыгы | Мүнөтүнө 135 галлон (8100 GPH) |
| RPM | 3450 RPM |
| Материал | Aluminum (Motor), Heavy Duty Plastic (Housing) |
| Элемент Салмагы | 34.9 фунт |
| Пакеттин өлчөмдөрү | 25 x 14.5 x 11.5 дюйм |
| Үн деңгээли | 45 дБ |
| UPC | 850013473021 |

Figure 4: Performance Curve Chart. The FP200 curve illustrates the relationship between pump head (pressure) and flow rate.
Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please contact FibroPool directly. Keep your purchase receipt as proof of purchase.
While specific warranty details are not provided in this manual, FibroPool is committed to providing quality products and customer satisfaction. For the most current warranty terms and conditions, please visit the official FibroPool webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.
You can often find contact information on the product packaging, the manufacturer's webсайтында же продукт сатып алынган чекене сатуучу аркылуу.



