1. Киришүү
The Ikan Remote Air 4 is a single-channel wireless follow focus system designed for precise control over camera lens functions. This fourth-generation system features significant upgrades to its components, offering enhanced flexibility and performance for various shooting scenarios. It includes a redesigned motor for improved torque and a higher drive resolution, ensuring accurate operation at all speeds. The system also incorporates Bluetooth 4.0 connectivity and an intuitive OLED screen for monitoring key information.
2. Продукциянын компоненттери
The Remote Air 4 system typically includes the following components:
- Focus Controller (Hand Controller)
- Receiver Motor (PD-RX)
- D-Tap Power Cable 0.7m (6-Pin)
- USB Charging Cable 0.9m (4-Pin)
- 15mm-19mm Adapter Ring
- 2x Glow in The Dark Marking Disks
- 2x Long Antennas
- 2x Short Antennas
- Lanyard
2.1-сүрөт: The Ikan Remote Air 4 system, showing the hand controller (left) and the receiver motor (right).
3. Орнотуу колдонмосу
3.1 Attaching the Receiver Motor
- Mount the receiver motor onto your camera rig using the appropriate rod clamp. The motor housing is designed to be thin and lightweight.
- Attach the motor's gear to the lens focus, iris, or zoom ring. Ensure a secure and proper mesh between the motor gear and the lens gear.
- Connect the D-Tap power cable from your power source (e.g., V-mount battery) to the receiver motor.
3.1-сүрөт: Side view of the Motor Air receiver motor, highlighting the gear mechanism for lens attachment.
3.2 Күйгүзүү жана жупташтыруу
- Power on the receiver motor. The OLED screen on the side of the motor will illuminate.
- Power on the hand controller.
- The system will automatically attempt to pair. The OLED screen on the motor will display signal channel, signal strength, and the controller's battery information upon successful connection.
- The controller supports master and slave modes, allowing for flexible control configurations.
3.2-сүрөт: The Remote Air 4 system demonstrating wireless connectivity, potentially with a smartphone application for advanced control.
4. Иштөө нускамалары
4.1 Using the Hand Controller
- The hand controller provides precise control over the connected lens function (focus, iris, or zoom).
- Rotate the main wheel for fine adjustments.
- Utilize the function buttons to switch between different control modes or to set A/B limits.
- The controller supports both right and left-hand operation.
4.1-сүрөт: Фронт view of the Remote Air 4 hand controller, showing the control wheel and buttons.
4.2 Monitoring with the OLED Screen
The receiver motor features an OLED screen on its side, providing real-time operational data. This screen displays:
- Сигнал каналы
- Сигнал күчү
- Controller's Battery Information
This new screen placement and display mode enhance visibility from various angles.
4.3 Drive Resolution
The Motor Air boasts 8192 levels of resolution, which is four times higher than previous generations. This allows for extremely accurate and smooth operation, even at varying speeds.
4.2-сүрөт: A comparison illustrating the enhanced 8192 DPI drive resolution of the new Motor Air (left) versus the 1920 DPI of the older model (right).
5. Техникалык тейлөө
To ensure the longevity and optimal performance of your Remote Air 4 system, follow these maintenance guidelines:
- Тазалоо: Use a soft, dry cloth to clean the exterior of the controller and motor. Avoid using harsh chemicals or abrasive materials.
- Сактагыч: Store the system in a dry, cool place, away from direct sunlight and extreme temperatures.
- Батареяга кам көрүү: Fully charge the internal batteries of the controller and motor before extended storage. Avoid completely draining the batteries regularly.
- Тиштүү жабдыктарды текшерүү: Periodically check the motor gear for any wear or debris. Clean if necessary to ensure smooth operation with lens gears.
6. Кыйынчылыктарды
If you encounter issues with your Remote Air 4 system, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Motor not responding to controller | Low battery on controller or motor; Loss of wireless connection; Motor not powered on. | Charge batteries; Re-pair devices; Ensure both units are powered on. |
| Inaccurate focus movement | Motor gear not properly meshed with lens gear; Calibration issue. | Adjust motor position for proper gear mesh; Perform lens calibration if available. |
| OLED screen is blank | Motor not powered on; Screen brightness too low (if adjustable). | Ensure motor is powered on and connected to power source. |
| Difficulty pairing devices | Interference; Devices too far apart; Incorrect pairing mode. | Move devices closer; Ensure no strong interference sources; Refer to specific pairing instructions in the full manual (if applicable). |
If the problem persists after attempting these solutions, please contact Ikan customer support.
7. Техникалык шарттар
Key specifications for the Ikan Remote Air 4 system:
| Өзгөчөлүк | Деталь |
|---|---|
| Продукциянын өлчөмдөрү | 8.1 x 5.4 x 3.4 дюйм |
| Элемент Салмагы | 1.9 фунт |
| Элемент моделинин номери | Remote Air 4 |
| Өндүрүүчү | Икан |
| Өзгөчө өзгөчөлүк | Эргономикалык дизайн |
| Шайкеш түзмөктөр | Camera, Camera Lens |
| Байланыш технологиясы | Bluetooth 4.0 |
| Controller Type | Control Button |
| Motor Drive Resolution | 8192 DPI |
8. Кепилдик маалыматы
The Ikan Remote Air 4 Single-Channel Wireless Follow Focus System is covered by an Ikan 1 Year Limited Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Ikan warranty policy or contact Ikan customer support.
9. Колдоо
For further assistance, technical support, or service inquiries regarding your Ikan Remote Air 4 system, please visit the official Ikan webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматы, адатта, өндүрүүчүнүн сайтынан тапса болот webсайтында же продуктунун таңгагында.
Note: No official product videos were found in the provided data to embed in this manual.
