TELWIN T-Charge 20 8a Evo Multifunction Battery Charger

1. Киришүү

The TELWIN T-Charge 20 8a Evo is a versatile electronic battery charger, charge maintainer, and tester designed for a wide range of 12V / 24V batteries, including WET, GEL, AGM, MF, PbCa, EFB, and Lithium types. It features an intuitive LCD display for easy parameter viewing and operation. This device incorporates advanced Pulse Tronic technology for optimized charging and maintenance, ensuring battery efficiency and longevity. It is equipped with various functions such as quick charge (BOOST), low-temperature charging (COLD), sulfated battery recovery (RECOVERY), and vehicle alternator/battery testing. Additionally, it can serve as a continuous power supply during battery changes to prevent loss of vehicle memory settings. Safety is paramount, with built-in protections against overload, short-circuit, and reverse polarity.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Бул продуктуну колдонуудан мурун бардык коопсуздук эскертүүлөрүн жана нускамаларын окуп чыгыңыз. Эскертүүлөр жана нускамаларды аткарбоо электр тогуна урунууга, өрткө жана/же олуттуу жаракат алууга алып келиши мүмкүн.

• Батареялар менен иштегенде ар дайым коргоочу көз айнек жана коргоочу кийим кийиңиз.
• Ensure adequate ventilation when charging batteries, as they can emit explosive gases.
• Заряддагычты жамгырга же нымдуу шарттарга чыгарбаңыз.
• Батареяга туташууларды жасоодон же үзүүдөн мурун кубат менен камсыздоону ажыратыңыз.
• Тоңуп калган батареяны эч качан заряддабаңыз.
• Балдар жетпеген жерде сактаңыз.
• Бул шайман физикалык, сезүү же акыл-эс жөндөмү начар же тажрыйбасы жана билими жок адамдар (анын ичинде балдар) үчүн, эгерде алардын коопсуздугуна жооптуу адам тарабынан көзөмөлсүз же шайманды колдонуу боюнча көрсөтмө болбосо, колдонууга арналбайт.

3. Продукт бүтүп калдыview

Сүрөт 3.1: Алдыңкы view of the TELWIN T-Charge 20 8a Evo charger, showing the main unit, red and black battery clamps, and eyelet terminal cables.

Сүрөт 3.2: Жакын пландан view of the charger's LCD display, indicating battery type, voltage (12V/24V), and charging status with numbered steps (1-8).

Figure 3.3: Diagram highlighting key features: BOOST for quick charge, RECOVERY for sulfated batteries, SUPPLY for power during battery changes, and TEST for alternator/battery checks. Also shows Pulse Tronic charging stages.

Figure 3.4: The included battery connection cables: one set with red and black clamps, and another set with eyelet terminals for permanent connection.

3.1. Компоненттер

• Негизги блок: The charger body with LCD display and control button.
• LCD дисплей: Shows battery type, voltage, charging mode, and progress.
• Башкаруу баскычы: Режимдерди тандоо жана жөндөөлөрдү ырастоо үчүн колдонулат.
• Батарея Clamps (Red/Black): For temporary connection to battery terminals.
• Eyelet терминалдары: For semi-permanent connection to battery terminals.
• Кубат кабели: Заряддоочу түзүлүштү электр булагына туташтырат.

4. Орнотуу

4.1. Алгачкы текшерүү

Before first use, inspect the charger and all accessories for any signs of damage. Do not use the device if any part is damaged.

4.2. Батареяга туташтыруу

1. Ensure the charger is disconnected from the mains power supply.
2. Батареяңыздын оң (+) жана терс (-) терминалдарын аныктаңыз.
3. кызыл (оң) cl туташтырууamp or eyelet terminal to the positive (+) battery terminal.
4. кара (терс) cl туташтырууamp or eyelet terminal to the negative (-) battery terminal.
5. For vehicle batteries, connect the negative clamp to the vehicle chassis away from the battery and fuel line if the battery is still in the vehicle and the negative terminal is grounded. Consult your vehicle's manual for specific instructions.
6. Туташуулардын бекем жана коррозияга дуушар болбогонун текшериңиз.

4.3. Кубат булагына туташуу

Once the battery connections are secure, plug the charger's power cable into a suitable 230V AC mains outlet.

5. Иштөө нускамалары

5.1. Automatic Charging (Pulse Tronic)

The charger automatically detects the connected battery type and voltage (12V/24V) and initiates the appropriate Pulse Tronic charging program. The LCD display will show the selected battery type and the current charging stage (1-8).

• Stage 1 (CHECK): Initial battery analysis.
• Stage 2 (DESULFATION): Recovers sulfated batteries (RECOVERY function).
• Stage 3 (ANALYSE): Further battery condition assessment.
• Stage 4 (MAIN CHARGE): Bulk charging phase.
• Stage 5 (FINE CHARGE): Absorption charging phase.
• Stage 6 (VERIFY): Checks charge level.
• Stage 7 (FLOAT): Maintains full charge.
• Stage 8 (PULSE): Long-term maintenance charging.

5.2. Атайын функциялар

Press the control button to cycle through available special functions:

• BOOST Функциясы: For rapid charging. Select this mode for a quicker charge cycle.
• МУЗДАК функциясы: Optimizes charging for low-temperature environments. This ensures efficient charging even in cold conditions.
• КАЛЫП КАЛЫП КАЛЫП КЕЛҮҮ Функциясы: Specifically designed to restore sulfated batteries. The charger applies a pulsed current to break down sulfate crystals.
• TEST Function: Performs diagnostic tests on the vehicle's battery, starting system, and alternator. The display will show the test results.
• SUPPLY Function: Provides a stable power supply to the vehicle's electrical system during battery replacement. This prevents loss of vehicle memory settings (e.g., radio presets, ECU data).

To select a function, press the button until the desired function is highlighted on the LCD display, then release the button. The charger will automatically begin the selected operation.

5.3. Заряддоочу түзүлүштү ажыратуу

1. Disconnect the charger from the mains power supply first.
2. Кара (терс) вилканы ажыратыңызamp/eyelet from the battery or vehicle chassis.
3. кызыл (оң) cl ажыратыңызamp/eyelet from the battery.

6. Техникалык тейлөө

6.1. Тазалоо

Clean the charger's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the charger is unplugged before cleaning.

6.2. Сактоо

Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the cables neatly coiled to prevent damage.

6.3. Cable and Connector Care

Regularly inspect the cables and connectors for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent electrical hazards.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in the product packaging for detailed terms and conditions. For technical support, troubleshooting assistance, or spare parts, please contact Telwin customer service or visit their official webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Өндүрүүчү: Telwin

Webсайт: www.telwin.com (Чыгampшилтеме, чыныгы шилтеме ар кандай болушу мүмкүн)