Project Source F51B0066CP 4-inch Chrome Bathroom Faucet

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source F51B0066CP 4-inch Chrome Bathroom Faucet. This faucet features a versatile design suitable for various bathroom aesthetics, durable solid brass construction, and washerless cartridges for reliable, drip-free performance. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product.

Сүрөт 1: Негизги view of the Project Source F51B0066CP 4-inch Chrome Bathroom Faucet. This image displays the faucet's polished chrome finish, the two handles, and the spout, highlighting its compact and elegant design.

2. Коопсуздук маалыматы

Орнотуу жана техникалык тейлөө учурунда ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Кандайдыр бир жумушту баштоодон мурун, негизги суу менен камсыздоону өчүрүңүз.
• Коргоочу көз айнектер жана кол каптар сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Суу агып кетпеши үчүн бардык туташуулардын коопсуз экенин текшериңиз.
• Эгерде сиз орнотуунун кайсы бир бөлүгү боюнча күмөн санасаңыз, квалификациялуу сантехникке кайрылыңыз.
• Туташтыргычтарды өтө бекем тартпаңыз, анткени бул кранга же сантехникага зыян келтириши мүмкүн.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экенин текшериңиз:

• Faucet body with two handles
• Mounting hardware (washers, nuts)
• Hot and cold water supply lines (may be pre-attached or separate)
• Калкыма дренаждык монтаж
• Орнотуу көрсөтмөлөрү (бул колдонмо)

4. Техникалык шарттар

5. Орнотуу (Орнотуу)

Follow these steps for proper installation of your new faucet:

1. Раковинаны даярдаңыз: Ensure the sink surface is clean and dry. Remove any old faucet and clean the mounting holes.
2. Кран орнотуу: Place the faucet body onto the sink deck, aligning the hot and cold water supply lines with the corresponding holes. Ensure the gasket or putty is properly seated under the faucet base to prevent leaks.
3. Кранды бекитиңиз: From underneath the sink, thread the mounting nuts onto the faucet shanks and tighten them securely by hand. Use a basin wrench if necessary, but do not overtighten.
4. Суу менен камсыздоо линияларын туташтыруу: Connect the hot and cold water supply lines from the faucet to the corresponding shut-off valves. Use thread sealant tape on the threads for a watertight seal. Tighten connections with a wrench, being careful not to overtighten.
5. Көчмө дренажды орнотуу: Follow the instructions provided with the pop-up drain assembly. Typically, this involves placing the drain body through the sink drain hole, applying plumber's putty or a gasket, and securing it from underneath with a nut. Connect the pivot rod to the lift rod mechanism on the faucet.
6. Агышуу үчүн сыноо: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are present, tighten the connections slightly until they stop.
7. Кранды жуу: Remove the aerator from the spout and turn on both hot and cold water for a few minutes to flush out any debris from the lines. Turn off the water, reattach the aerator, and check for proper flow.

Image 2: The Project Source F51B0066CP faucet shown installed on a white bathroom sink, demonstrating its appearance in a typical bathroom setting. The chrome finish reflects the surrounding environment, and the two handles are visible.

6. Операция

Your Project Source F51B0066CP faucet features two handles for controlling water flow and temperature:

• The left handle controls the hot water. Turn it counter-clockwise to increase hot water flow.
• The right handle controls the cold water. Turn it counter-clockwise to increase cold water flow.
• Каалаган суунун температурасына жана агым ылдамдыгына жетүү үчүн эки тутканы тең тууралаңыз.
• To operate the pop-up drain, lift the small rod located behind the faucet spout to close the drain, and push it down to open the drain.

7. Техникалык тейлөө

Regular maintenance will help preserve the finish and functionality of your faucet:

• Тазалоо: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish. Rinse thoroughly and dry with a soft cloth.
• Аэраторду тазалоо: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse it before reattaching.
• Картриджди алмаштыруу: If the faucet drips or leaks from the handles, the washerless cartridges may need replacement. Turn off the water supply, remove the handle, and replace the cartridge according to the manufacturer's instructions for the specific cartridge type.

8. Кыйынчылыктарды

9. Кепилдик маалыматы

Project Source products are manufactured to high-quality standards and are backed by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the Project Source official webдеталдуу кепилдик шарттары жана шарттары үчүн сайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

10. Кардарларды колдоо кызматы

If you have any questions, require assistance with installation, or need to order replacement parts, please contact Project Source customer service. Contact information can typically be found on the product packaging or the official Project Source webсайт.