1. Киришүү
This manual provides essential information for the safe and effective operation, assembly, and maintenance of your Einhell TC-TS 2025/2 U Bench-type Circular Saw. This powerful tool is designed for precise cutting of solid wood, wood fiberboard, and similar materials. Please read this manual thoroughly before initial use and keep it for future reference.
2. Коопсуздук маалыматы
Жаракат алуунун жана шаймандардын бузулушунун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Колдонмону окуу: Колдонуудан мурун бардык башкаруу элементтери, жөндөөлөр жана иштөө процедуралары менен таанышыңыз.
- Жеке коргонуу каражаттары (ЖКК): Always wear safety glasses, hearing protection, and a dust mask. Gloves are recommended for handling rough materials, but avoid loose clothing or jewelry that could get caught in moving parts.
- Иш чөйрөсү: Ensure your work area is clean, well-lit, and free of clutter. Keep children and bystanders away.
- Кубат туташуу: Connect the saw to a properly grounded power outlet. Do not use in damp же нымдуу шарттар.
- Бычактын коопсуздугу: Ensure the saw blade is sharp, clean, and correctly installed. Never operate the saw without the blade guard in place.
- Материалды иштетүү: Always use a push stick or push block when feeding small workpieces or when your hands are close to the blade. Never reach over the blade.
- Туруктуулук: Ensure the saw is stable and securely placed on a level surface before operation.
- Колдонулбаган учурда электр розеткасынан ажыратыңыз: Оңдоолорду жасоодон, бычактарды алмаштыруудан же техникалык тейлөөдөн мурун арааны электр кубатынан ажыратыңыз.
3. Components Overview
Understanding the main components of your circular saw is crucial for safe and effective operation.
3.1-сүрөт: Жалпысынан view of the Einhell TC-TS 2025/2 U Bench-type Circular Saw, showing the main table, blade, and stand.
3.2-сүрөт: A user operating the circular saw, demonstrating typical usage for cutting wood planks.
3.3-сүрөт: Close-up of the adjustment wheel for controlling the saw blade's height and angle.
3.4-сүрөт: Detail of the saw blade guard and the flexible hose for dust extraction, showing height and angle adjustment indicators.
3.5-сүрөт: View of the dust extraction system, including the hose connecting to the saw blade area and the main collection port.
3.6-сүрөт: Close-up of the parallel stop with its integrated measurement scale for accurate longitudinal cuts.
4. Орнотуу
Follow these steps for initial assembly and setup of your circular saw:
- Пакеттен чыгаруу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз. Кандайдыр бир бузулган же жетишпеген бөлүктөрүн текшериңиз.
- Негизги алкакты чогултуу: Connect the frame components according to the diagrams provided in the separate assembly guide. Ensure all bolts are securely tightened.
- Mount the Saw Unit: Place the main saw unit onto the assembled base frame. Secure it using the provided fasteners.
- Install Saw Blade: If the blade is not pre-installed, carefully mount the 250mm carbide-tipped precision saw blade, ensuring the rotation direction matches the arrow on the saw. Use the appropriate tools for tightening the blade nut.
- Attach Blade Guard and Dust Extraction: Secure the transparent blade guard over the saw blade. Connect the dust extraction hose to the guard and the main dust port on the saw unit.
- Install Parallel and Angle Stops: Attach the parallel stop to the table and ensure it slides smoothly. Position the angle stop in its designated slot.
- Таблица кеңейтүүлөрү: If desired, attach the left and right table extensions to expand the working surface for larger workpieces.
5. Иштөө нускамалары
Proper operation ensures safety and optimal cutting performance.
5.1 Күйгүзүү/өчүрүү
- To turn on the saw, press the green 'ON' button.
- To turn off the saw, press the red 'OFF' button. The saw will stop quickly.
5.2 Бышактын бийиктигин жана бурчун тууралоо
The saw blade's height and angle can be adjusted using a single hand manoeuvre.
- Бийиктигин тууралоо: Rotate the adjustment wheel to raise or lower the blade. For optimal cutting, the blade should extend slightly above the workpiece.
- Бурчту тууралоо: Tilt the saw blade to the desired angle (up to 45°) for miter cuts. The maximum cutting height at 90° is 85mm, and at 45° is 65mm.
5.1-сүрөт: Icon indicating a 250mm saw blade diameter.
5.2-сүрөт: Icon showing maximum cutting depth of 85mm at a 90-degree angle.
5.3-сүрөт: Icon showing maximum cutting depth of 65mm at a 45-degree angle.
5.3 Using the Parallel Stop
The parallel stop is used for precise longitudinal cuts (ripping).
- Position the parallel stop to the desired width using the measurement scale on the table.
- Securely lock the parallel stop in place before starting the cut.
- Feed the workpiece steadily against the parallel stop and into the blade.
5.4 Бурчту токтотуучу каражатты колдонуу
The angle stop allows for accurate miter cuts.
- Insert the angle stop into the T-slot on the table.
- Adjust the angle stop to the required angle (up to +/- 60°).
- Hold the workpiece firmly against the angle stop and feed it through the blade.
5.5 Чаңды чыгаруу
For a cleaner work environment and improved visibility, connect a suitable vacuum cleaner to the dust extraction port.
6. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө араанын узак мөөнөттүү жана коопсуз иштешин камсыз кылат.
- Тазалоо: After each use, unplug the saw and remove sawdust and debris from the table, blade guard, and motor housing using a brush or vacuum. Do not use solvents.
- Бычакты багуу: Inspect the saw blade regularly for sharpness and damage. A dull blade can cause kickback and poor cuts. Replace worn or damaged blades promptly.
- Майлоо: Periodically lubricate moving parts as indicated in the detailed service manual (if applicable).
- Шнур текшерүү: Check the power cord for any signs of damage or fraying. Replace immediately if damaged.
- Сактоо функциясы: Ensure all safety guards move freely and return to their proper positions.
7. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сау башталбайт | Электр энергиясы жок; туура эмес өчүргүч; мотор ашыкча жүктөө. | Check power connection and circuit breaker; contact service if switch is faulty; allow motor to cool. |
| Blade not cutting cleanly / burning wood | Dull blade; incorrect blade for material; improper feed rate. | Replace or sharpen blade; use appropriate blade type; adjust feed rate. |
| Ашыкча термелүү | Loose blade; damaged blade; unstable setup. | Tighten blade nut; replace damaged blade; ensure saw is on a stable surface. |
| Чаңды начар сордуруу | Clogged hose/port; vacuum not powerful enough. | Clear blockages; use a more powerful dust extractor. |
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | TC-TS 2025/2 U |
| Power Source | Электр зымдары |
| Ватtage | 2000 Вт |
| Тtage | 230 V |
| Аралагычтын диаметри | 250 мм |
| 90° максималдуу кесүү бийиктиги | 85 мм |
| 45° максималдуу кесүү бийиктиги | 65 мм |
| Angle Stop Adjustment | +/- 60 ° |
| Продукциянын өлчөмдөрү (L x W x Y) | 113.5 x 89.6 x 87 см |
| Элемент Салмагы | 19.2 кг |
9. Кепилдик жана колдоо
Einhell Power Tools come with a 2-year warranty as standard. An additional 1-year warranty is available upon registration of your product. To activate the additional services, Einhell products must be registered on our webсайт сатып алгандан кийин 30 күндүн ичинде.
For customer service and support, please contact the helpline at: 0151 649 1500.
For more information and to register your product, please visit the official Einhell webсайт.
