Ingenico Move3500 базалык кубаттагычын колдонуучунун колдонмосу

1. Киришүү

This manual provides essential instructions for the proper setup, operation, and maintenance of your Ingenico Move3500 Base Charger. Please read this manual thoroughly before using the device to ensure safe and efficient operation.

2. Коопсуздук маалыматы

• Ensure the charger is connected to a power source that matches the voltage requirements specified on the power adapter.
• Do not expose the charger to water, excessive moisture, or extreme temperatures.
• Avoid dropping or subjecting the charger to severe impacts.
• Кубаттоочу түзүлүштү бөлүктөргө бөлүүгө же өзгөртүүгө аракет кылбаңыз. Бардык тейлөө иштерин квалификациялуу адистерге тапшырыңыз.
• Заряддоо түзүлүштү күйүүчү материалдардан алыс кармаңыз.

3. Пакеттин мазмуну

Пакетиңизге төмөнкү нерсе киргенин текшериңиз:

• Ingenico Move3500 Base Charger (Main Unit)

Note: The power adapter for the base charger is typically sold separately or included with the Move3500 terminal. Ensure you have the correct power adapter for operation.

4. Орнотуу

1. Заряддагычты таңгактан чыгаруу: Carefully remove the Ingenico Move3500 Base Charger from its packaging.
2. Туташуу кубаты: Locate the 2-pin power input port on the base charger. Connect the appropriate power adapter (not included) to this port, then plug the power adapter into a standard electrical outlet.
3. Place the Terminal: Gently place your Ingenico Move3500 payment terminal onto the base charger. Ensure the terminal's charging contacts align correctly with the magsafe connector on the base. The terminal should sit securely in the base.

Image: The Ingenico Move3500 Base Charger, a black, compact unit designed to hold and charge the Move3500 payment terminal. It features a recessed area for the terminal and a magsafe-style charging connector.

Once the terminal is correctly seated, it should begin charging. Refer to your Move3500 terminal's manual for specific charging indicators.

5. Иштөө нускамалары

The Ingenico Move3500 Base Charger is designed for simple operation:

• Заряддоо: To charge your Move3500 terminal, simply place it onto the base charger, ensuring a firm connection. The terminal's display or indicator lights will confirm that charging has commenced.
• Алып салуу: To remove the terminal, lift it gently from the base.
• Үзгүлтүксүз кубат: The base can provide continuous power to the terminal when docked, allowing for extended use without battery drain.

6. Техникалык тейлөө

• Тазалоо: Disconnect the charger from the power source before cleaning. Use a soft, dry, lint-free cloth to wipe the exterior of the base. Do not use liquid cleaners, aerosols, or solvents.
• Сактагыч: When not in use for extended periods, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures.
• Байланыштарды текшерүү: Periodically check the power cable and charging contacts for any signs of damage or wear.

7. Кыйынчылыктарды

• Terminal Not Charging:
  • Ensure the power adapter is securely plugged into both the base charger and the electrical outlet.
  • Электр розеткасынын иштеп турганын текшериңиз.
  • Check that the Move3500 terminal is correctly seated on the base, with charging contacts aligned.
  • Inspect the charging contacts on both the terminal and the base for any debris or damage.
• Үзгүлтүксүз заряддоо:
  • Ensure the base is on a stable, flat surface to prevent the terminal from shifting.
  • Clean the charging contacts on both devices.

If problems persist, contact Ingenico customer support or your service provider.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided with your Ingenico Move3500 payment terminal or visit the official Ingenico website. You may also contact your product reseller for assistance.