1. Киришүү
This manual provides essential information for the safe installation, operation, and maintenance of your SATCO S9950 23 Watt PLL T5 LED Light Bulb. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: The SATCO S9950 23 Watt PLL T5 LED Light Bulb. This image displays the elongated, frosted LED tube with a 2G11 base, designed for efficient lighting.
2. Коопсуздук маалыматы
WARNING: Risk of electric shock. Installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Always turn off power at the circuit breaker before installation, removal, or inspection.
- Бул лamp is designed for Ballast Bypass (Type B) operation. It requires direct wiring to the main voltage. Do not use with a ballast.
- Do not use in fully enclosed luminaires unless specified.
- Voltage supply (120-277V) matches the lampталаптары.
- l-ди ажыратууга же өзгөртүүгө болбойтamp.
- l тийүүдөн качыңызamp нымдуу колдору менен.
- lampжергиликтүү эрежелерге ылайык.
3. Продукт бүтүп калдыview жана өзгөчөлүктөрү
The SATCO S9950 is a high-efficiency 23 Watt PLL T5 LED light bulb, designed as a direct replacement for traditional fluorescent lamps in ballast bypass applications. It offers significant energy savings and a long lifespan.
- Модел: S9950
- Ватtage: 23 Ватт
- Негизги түрү: 2G11
- Люмен чыгаруу: 2800 Lumens
- Түс температурасы: 3500K (нейтралдуу ак)
- Тtage: 120-277 Вольт
- Түрү: Ballast Bypass (Type B)
- Өзгөчөлүк: Frosted finish for diffused light
4. Setup and Installation (Ballast Bypass)
Бул LED лamp operates on a ballast bypass system, meaning the existing ballast must be removed or bypassed, and the lamp wired directly to the main voltage supply. Professional installation is recommended.
- Кубатты өчүрүү: Locate the circuit breaker controlling the fixture and turn off the power supply. Verify power is off using a voltage сыноочу.
- Учурдагы Лamp: Carefully remove the old fluorescent lamp шаймандан.
- Bypass/Remove Ballast:
- Open the fixture to access the wiring compartment.
- Disconnect all wires leading to and from the existing ballast.
- Remove the ballast from the fixture.
- Rewire the fixture to provide direct AC line voltage чейин лamp holders. For a 2G11 base, ensure the live (L) and neutral (N) wires are connected to the appropriate pins on the lamp holder. Refer to the fixture's wiring diagram or consult a qualified electrician.
- LED L орнотууamp: Insert the SATCO S9950 LED lamp into the 2G11 lamp holder, ensuring it is securely seated.
- Күчтү калыбына келтирүү: Close the fixture cover and restore power at the circuit breaker.
- Сыноо: Туура иштешин ырастоо үчүн жарык өчүргүчтү күйгүзүңүз.
Эскертүү: Бул лamp is designed for single-ended power input. Ensure wiring is configured correctly for the 2G11 base.
5. Иштөө нускамалары
Once installed, the SATCO S9950 LED light bulb operates like any standard light source. Simply use the wall switch or fixture control to turn the light on or off.
- Электр энергиясы менен камсыздоо белгиленген көлөмдө болушун камсыз кылыңызtage диапазону (120-277V).
- Avoid frequent on/off cycling, though LED lamps are generally robust to this.
6. Техникалык тейлөө
The SATCO S9950 LED light bulb requires minimal maintenance.
- Тазалоо: Before cleaning, ensure the power is off and the lamp is cool. Wipe the frosted surface with a soft, dry, or slightly damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Алмаштыруу: Качан лamp reaches the end of its lifespan, follow the "Setup and Installation" steps in reverse to safely remove and replace it. Ensure power is off before handling.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Lamp жанбайт. |
|
|
| Lamp бүлбүлдөгөн. |
|
|
8. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Бренд | Сатко |
| Модель номери | S9950 |
| Жарык түрү | LED |
| Ватtage | 23 Ватт |
| Кызытуу эквиваленти Ватtage | 40 Ватт |
| Лампанын формасынын өлчөмү | T5 1/2 |
| Негизги түрү | 2G11 |
| Өзгөчө өзгөчөлүк | агала |
| Ачык түс | Нейтралдуу Ак |
| Түс температурасы | 3500 Келвин |
| Жарыктык | 2800 Lumens |
| Тtage | 120-277 Вольт |
| Power Source | Электр зымдары |
| Түстөрдү көрсөтүү индекси (CRI) | 80 |
| Натыйжалуулук | 122 Lumens/Watt |
| Материал | Жез (ички компоненттер) |
| Продукциянын өлчөмдөрү | 25 x 7 x 7 inches (packaging/overall dimensions, bulb itself is elongated) |
| Элемент Салмагы | 14.4 унция |
| Ички/тышкы колдонуу | Outdoor (suitable for appropriate fixtures) |
9. Кепилдик жана колдоо
For warranty information or technical support regarding your SATCO S9950 LED light bulb, please refer to the official Satco webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
Өндүрүүчү: Сатко
Webсайт: www.satco.com





