BADLAND APEX Synthetic 12 000 фунттук зымсыз лебедка колдонуучусунун колдонмосу

Introduction

This manual provides essential information for the safe operation, installation, and maintenance of your BADLAND APEX Synthetic 12,000 Lb. Wireless Winch. Please read this manual thoroughly before using the winch to ensure proper function and to prevent injury or damage.

Image: The BADLAND APEX 12,000 Lb. Wireless Winch, featuring its robust black housing, synthetic rope, fairlead, and a wireless remote control unit. This image illustrates the primary components of the winch system.

Маанилүү коопсуздук маалыматы

Always prioritize safety when operating the winch. Failure to follow these instructions can result in serious injury or property damage.

• Колдонмону окуу: Understand all warnings and operating procedures before use.
• Коргоочу шаймандарды кийүү: Ар дайым бекем кол каптарды жана көздү коргоочу каражаттарды кийиңиз.
• Колдонуудан мурун текшерүү: Check the winch, rope, hooks, and all connections for damage or wear.
• Never Overload: Do not exceed the winch's rated capacity.
• Коопсуз аралыкты сактоо: Keep bystanders clear of the winching area.
• Шок жүктөмдөрүнөн качыңыз: Apply power smoothly; avoid sudden jerking.
• Коопсуз унаа: Always set the parking brake and block wheels.
• Батареяны ажыратуу: Disconnect the battery when not in use or during maintenance.
• Жылуулук жөнүндө эскертүү: The motor and components can become hot during prolonged use.

Орнотуу жана орнотуу

Лебедканы орнотуу

The winch must be securely mounted to a flat, structural surface capable of withstanding the maximum rated pull. Use high-grade bolts and reinforcement plates as necessary.

1. Choose a suitable mounting location, typically a winch bumper or mounting plate.
2. Ensure the mounting surface is strong enough to handle the winch's pulling force.
3. Align the winch and mark the drilling points for the mounting bolts.
4. Drill holes as required and secure the winch using appropriate hardware.
5. Ensure the fairlead is properly aligned with the winch drum.

Электр байланыштары

Proper electrical wiring is critical for safe and efficient operation. Consult a professional if you are unsure about wiring procedures.

• Connect the thick red cable from the winch motor to the positive (+) terminal of the vehicle battery.
• Connect the thick black cable from the winch motor to a clean, unpainted chassis ground point or the negative (-) terminal of the battery.
• Бардык туташуулардын бекем жана коррозияга учурабагандыгын текшериңиз.
• Route cables away from hot or moving parts and sharp edges.

Иштөө нускамалары

Операцияга чейинки текшерүү тизмеси

• Ensure the vehicle is stable and secured.
• Check the synthetic rope for frays, cuts, or damage.
• Бардык байланыштар коопсуз экенин текшериңиз.
• Confirm the wireless remote control is functioning and has fresh batteries.

Winching Procedure

1. аймакты даярдоо: Clear the winching path of obstacles and ensure bystanders are at a safe distance.
2. Анкердик пункттар: Select a strong, stable anchor point (e.g., tree, rock, another vehicle). Use a tree saver strap or recovery strap to protect the anchor.
3. Unspool Rope: Disengage the clutch to free spool the synthetic rope to the anchor point. Leave at least five wraps of rope on the drum.
4. Secure Hook: Attach the hook securely to the recovery strap or shackle.
5. Муфтаны кошуу: Re-engage the clutch fully.
6. Лебедканы баштоо: Use the wireless remote control to slowly reel in the rope. Operate in short bursts to prevent overheating.
7. Монитор: Continuously monitor the rope, anchor point, and winch for any signs of stress or malfunction.
8. Токтотуу: Once the recovery is complete, stop the winch.
9. Чыңалууну бошотуу: Carefully release tension from the rope before disconnecting.
10. Respool Rope: Neatly respool the rope under light tension.

Зымсыз алыстан башкаруу

The wireless remote allows for safe operation from a distance. Ensure the remote is paired with the winch according to the pairing instructions (refer to separate remote manual if provided).

• Press the "IN" button to reel in the rope.
• Press the "OUT" button to reel out the rope.
• Ensure the remote is kept dry and protected from impact.

Техникалык тейлөө

Regular maintenance ensures the longevity and reliable performance of your winch.

• Арканды текшерүү: Regularly inspect the synthetic rope for frays, cuts, or signs of wear. Replace damaged rope immediately.
• Тазалык: Keep the winch clean and free of dirt, mud, and debris. Rinse with fresh water after use in harsh conditions.
• Электр байланыштары: Check all electrical connections periodically for tightness and corrosion. Clean terminals as needed.
• Майлоо: Consult a service professional for internal lubrication if required. Do not attempt to lubricate the motor or gearbox unless specifically instructed.
• Сактагыч: If storing the vehicle for extended periods, consider disconnecting the winch from the battery.

Проблемаларды чечүү

Техникалык шарттар

• Бренд: БАДЛАНД
• Модел: H56385
• Рейтингдик линия: 12,000 Lb. (Single Line)
• Аркан түрү: Синтетикалык
• Элемент Салмагы: 81.8 фунт
• Пакеттин өлчөмдөрү: 24 x 14 x 14 дюйм
• Кубат булагы: 12V DC (Унаа Батареясы)
• Контролдоо: Wireless Remote
• ASIN: B0824XFNNZ
• Биринчи жеткиликтүү болгон күнү: 29-ноябрь, 2019-жыл

Кепилдик жана колдоо

Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, өндүрүүчүнүн расмий өкүлүнө кайрылыңыз website or contact BADLAND customer service directly. Keep your purchase receipt for warranty claims.

Өндүрүүчү: БАДЛАНД

Бөлүмдүн номери: H56385

Кошумча жардам алуу үчүн, иш сапары менен Harbor Freight Tools Customer Service (as BADLAND is a Harbor Freight brand).