Introduction
The ENERMAX Max Pro II series power supply is designed for the European market, offering low noise and efficient operation. This power supply achieves 88% peak efficiency, certified by 80 PLUS® 230V EU, and features a standby power consumption of less than 0.5 watts, complying with the latest EU eco-design regulations.
It incorporates a 120 mm high-pressure fan with patented Twister Bearing technology for quiet and effective cooling. The SafeGuard multiple safety system provides comprehensive protection against overcurrent, overvoltage, short circuit, undervoltage, overheat, and overpower, ensuring system stability and longevity. Max Pro II power supplies are built for continuous 24-hour operation at ambient temperatures up to 40°C.
Коопсуздук чаралары
- Always disconnect the power supply from the main power outlet before installation or maintenance.
- Электр менен камсыздоо блогун ачпаңыз. Жогорку томtages are present inside, which can be dangerous.
- Сиздин компьютер системасынын туура негизделиши камсыз кылуу.
- Avoid operating the power supply in high humidity or extreme temperature environments.
- Keep the power supply away from liquids and excessive dust.
Орнотуу жана орнотуу
Follow these steps to properly install your ENERMAX Max Pro II power supply:
- Кубат менен камсыздоону таңгактан чыгарыңыз: Carefully remove the power supply from its packaging and inspect it for any signs of damage.
- Кубат менен жабдууну орнотуу: Secure the power supply into the designated bay in your computer case using the provided screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or towards the inside of the case, depending on case design).
- Негизги электр кабелдерин туташтыруу:
- Connect the 24-pin ATX main power connector to your motherboard.
- Connect the 4+4-pin or 8-pin EPS12V CPU power connector to your motherboard.
- Перифериялык кабелдерди туташтыруу: Utilize the flat cables for easy installation and clean cable management. Connect SATA power connectors to your storage drives (HDDs, SSDs) and optical drives. Connect 6+2-pin PCIe power connectors to your graphics card(s) as required.
- Байланыштарды текшерүү: Double-check all connections to ensure they are firmly seated. Loose connections can cause system instability or damage.
- Дубал розеткасына туташуу: Once all internal connections are secure, connect the AC power cord to the power supply and then to a grounded wall outlet.
Сүрөт 1: Алдыңкы view of the ENERMAX Max Pro II 600W Power Supply, showing the fan grille and branding.
2-сүрөт: Каптал view of the power supply, illustrating the flat cable design for improved cable management.
Иштөө нускамалары
The ENERMAX Max Pro II is designed for reliable and efficient operation:
- Күйгүзүү: After installation, turn on your computer system. The power supply will automatically begin operation.
- Натыйжалуулугу: The unit operates with up to 88% efficiency at 230VAC between 20% and 100% load, reducing energy waste and heat generation.
- Муздатуу системасы: The integrated 120mm fan with patented Twister Bearing technology and Smart Airflow Control (SAC) ensures quiet operation, maintaining fan noise at approximately 14dB(A) up to 40% system load.
- Үзгүлтүксүз иштөө: This power supply is engineered for 24-hour continuous operation at an ambient temperature of 40°C, providing consistent performance for demanding systems.
- Энергияны үнөмдөө: Supports Intel® ATX12V v2.3 and the C6/C7 energy-saving functions of Intel® processors (first introduced with the Haswell™ generation), contributing to lower power consumption in idle states.
3-сүрөт: жогорудан ылдыйга view of the 120mm fan, highlighting the Twister Bearing technology for quiet and efficient cooling.
Техникалык тейлөө
Туура тейлөө сиздин энергия менен камсыздооңуздун узак мөөнөттүү жана оптималдуу иштешин камсыз кылат:
- Чаңды тазалоо: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air or a soft brush. Ensure the power supply is disconnected from the mains before cleaning.
- Туура аба агымын камсыз кылуу: Make sure that the air vents of your computer case are not obstructed. Good airflow within the case is crucial for the power supply's cooling system.
- Экологиялык шарттар: Operate the power supply within recommended temperature and humidity ranges. Avoid placing your computer in direct sunlight or near heat sources.
Проблемаларды чечүү
If you encounter issues with your ENERMAX Max Pro II power supply, consider the following troubleshooting steps:
- Кубат жок:
- AC кубат шнурунун кубат булагына жана розеткага бекем туташкандыгын текшериңиз.
- Ensure the power switch on the back of the power supply is in the 'ON' position.
- Розетканын иштеп жатканын башка түзмөктү сайып текшериңиз.
- Confirm all internal power connectors (24-pin ATX, EPS12V, PCIe) are correctly and firmly seated.
- Системанын туруксуздугу/Кокус өчүрүүлөр:
- This could indicate an overloaded power supply or a component issue. Ensure your system's power requirements do not exceed the PSU's capacity.
- The SafeGuard multiple safety system (OVP, UVP, OPP, SCP, OCP, OTP) will protect the system from damage in case of electrical anomalies. If the PSU shuts down, it might be due to one of these protections activating.
- Check for proper ventilation within the PC case to prevent overheating.
- адаттан тыш үндөр: While the fan is designed for quiet operation, excessive or unusual noises might indicate a problem. Ensure no cables are obstructing the fan blades. If the noise persists, contact support.
Техникалык шарттар
| Өзгөчөлүк | Нарк |
|---|---|
| Бренд | Enermax |
| Модель аты | MAXPRO II |
| Модель номери | EMP600AGT-C |
| Чыгуу күчү | 600 Ватт |
| Форма фактору | ATX |
| Туташтыргыч түрү | ATX |
| Муздатуу ыкмасы | Аба |
| Элементтин өлчөмдөрү (L x W x Y) | 15 x 14 x 8.6 сантиметр |
| Элемент Салмагы | 1.6 килограмм |
| Түс | Кара |
| Шайкеш түзмөктөр | PC |
| Натыйжалуулуктун сертификациясы | 80 PLUS 230V EU (up to 88% peak efficiency) |
| Коопсуздук өзгөчөлүктөрү | SafeGuard (OVP, UVP, OPP, SCP, OCP, OTP) |
Кепилдик жана колдоо
Кепилдик: The ENERMAX Max Pro II power supply typically comes with a 3-year manufacturer's warranty. Please refer to your purchase documentation for specific terms and conditions.
Кардарларды колдоо: For technical assistance, warranty claims, or further inquiries, please visit the official Enermax website or contact their customer support department. Ensure you have your product model number (EMP600AGT-C) and proof of purchase available when contacting support.
Видео ресурстар
No official product videos from the seller were found in the provided data. For additional visual guides or product information, please check the official Enermax webсайт же ыйгарым укуктуу сатуучулар.
