Spektrum SRXL2 DSMX Receiver SPM4650C Instruction Manual

Коопсуздук маалыматы

ЭСКЕРТҮҮ: Иштетүүдөн мурун продуктунун өзгөчөлүктөрү менен таанышуу үчүн ТОЛУГУ МЕНЕН нускаманы окуп чыгыңыз. Продукцияны туура эмес иштетсеңиз, продуктуга, жеке мүлккө зыян келтирип, олуттуу жаракат алышыңыз мүмкүн. Бул татаал хобби продуктусу. Аны этияттык жана акыл-эс менен иштетүү керек жана кээ бир негизги механикалык жөндөмдөрдү талап кылат. Бул продуктуну коопсуз жана жоопкерчиликтүү түрдө иштетпесе, жаракат алууга же продуктуга же башка мүлккө зыян келтирилиши мүмкүн. Бул продукт чоңдордун түздөн-түз көзөмөлүсүз балдар тарабынан колдонуу үчүн арналган эмес. Horizon Hobby, LLC тарабынан берилген көрсөтмөлөрдөн тышкары, шайкеш келбеген компоненттер менен колдонбоңуз же бул продуктуну эч кандай жол менен өзгөртпөңүз. Продукциянын колдонмосунда коопсуздук, иштетүү жана техникалык тейлөө боюнча көрсөтмөлөр камтылган. Туура иштөө жана зыяндын же олуттуу жаракаттын алдын алуу үчүн, чогултуудан, орнотуудан же колдонуудан мурун колдонмодогу бардык көрсөтмөлөрдү жана эскертүүлөрдү окуп чыгуу жана аткаруу маанилүү.

Продукт бүттүview

The SPM4650 DSMX SRXL2 Serial Micro Receiver is an advanced solution for remote control applications. It features SRXL2 protocol for fast serial data connection with up to 20 channels, enhancing bi-directional communication between the radio system and flight controller. This allows for advanced telemetry and flight control configuration directly from a Spektrum Transmitter.

The receiver is designed to be small, lightweight, and customizable, making it suitable for various applications. It includes a simple bind button for easy pairing without the need for a separate receiver or bind plug. Dual antennas provide diversity for robust signal reception, and long coax antennas help maintain maximum signal strength in challenging installations where materials like carbon fiber, metal, and batteries might obstruct the signal. Utilizing Spektrum DSMX 2.4GHz RF protocol, the receiver delivers reliable range and interference-free performance.

Эскертүү: This receiver is not compatible with the following aircraft models: EFL9650 V-22 Osprey VTOL BNF Basic (487mm), EFL9675 V-22 Osprey VTOL PNP (487mm), EFL9350 Mini Convergence VTOL BNF Basic (410mm), EFL9375 Mini Convergence VTOL PNP (410mm).

Image: Spektrum SRXL2 DSMX Receiver SPM4650C, showing its compact size and connector ports.

Негизги өзгөчөлүктөрү

• SRXL2 Technology: Provides a fast serial data connection with up to 20 channels and enhanced bi-directional communication.
• Компакт дизайн: Small and lightweight, ideal for various applications, including micro-sized setups.
• Wide Voltage Киргизүү диапазону: Ensures compatibility with different power sources.
• Fly-By Telemetry: Offers real-time data feedback to the Spektrum Transmitter.
• Dual Diversity Antennas: Enhances signal reliability and range.
• Integrated Bind Button: Simplifies the binding process, eliminating the need for external plugs.
• DSMX 2.4GHz RF Protocol: Delivers reliable range and interference-free performance.

Пакеттин мазмуну

• (1) Spektrum SRXL2 DSMX Receiver with Connector Installed (SPM4650C)
• (2) Антенналар

Орнотуу нускамалары

1. Basic Binding Procedure

This procedure outlines how to bind your Spektrum SRXL2 DSMX Receiver (SPM4650C) with a compatible transmitter, such as the Radiomaster TX16S.

1. Ensure your transmitter is powered on and set to the correct protocol (e.g., DSMX 2F 22ms for this receiver).
2. Connect a bind plug to channel 6 on the receiver.
3. While holding down the 'C' button on the receiver, power on the receiver. All six programming LEDs (three red, three blue) will flash.
4. On your transmitter, initiate the binding process. The receiver's LEDs will stop flashing and become solid, indicating a successful bind.
5. Unplug the bind plug from the receiver.
6. Power cycle the receiver by unplugging and re-plugging the power. The receiver should now be bound and ready for further setup.

2. Failsafe орнотуу

The default failsafe setting for this receiver is 'no pulses'. To set custom failsafe positions (e.g., mid-throttle, slight elevator/aileron), follow these steps:

1. Ensure the receiver is powered on and bound to your transmitter.
2. Position your transmitter sticks and switches to the desired failsafe positions (e.g., throttle to mid, elevator slightly up, aileron neutral).
3. Press and hold the 'F' button on the receiver for approximately 3 seconds. The blue light on the receiver will illuminate, indicating the failsafe positions have been registered.
4. Release the 'F' button. Your custom failsafe settings are now active.
5. To revert to the factory default 'no pulses' failsafe, press and hold the 'F' button again until the blue light turns off.

3. Activating Stabilization and Master Gain

This receiver supports stabilization features. You can activate stabilization and control its master gain via your transmitter. This example uses a Radiomaster TX16S.

1. Set Aircraft Type:
   • Connect a bind plug to channel 6.
   • Power on the receiver while holding the 'C' button. All six programming LEDs will flash.
   • The LEDs will cycle through different patterns, indicating various aircraft types (e.g., R1 and R2 for conventional tail).
   • When the desired aircraft type is indicated by the LEDs, press the 'C' button twice quickly. The lights will become solid, confirming the selection.
2. Program Stabilization Channel:
   • Connect a bind plug to channel 5.
   • Power on the receiver while holding the 'C' button. All six programming LEDs will flash.
   • The LEDs will cycle through colors: green for Channel 7, blue for Channel 5.
   • When the desired channel (e.g., green for Channel 7) is lit, press the 'C' button once. The light will become solid, indicating the stabilization channel is set.
3. Program Master Gain Channel:
   • With the transmitter on and receiver bound, power on the receiver.
   • Wait at least 60 seconds for the receiver to initialize.
   • Press the 'F' button until the blue setup light turns on. Release the 'F' button. The green status light should also be on, indicating stabilization is active.
   • On your transmitter, assign a switch or dial (e.g., S1 dial) to Channel 8 for master gain control.
   • You can now control the stabilization on/off and adjust the master gain via your assigned controls.

Иштөө нускамалары

Once the Spektrum SRXL2 DSMX Receiver (SPM4650C) is properly installed and configured, operating your remote-controlled vehicle involves the following general steps:

1. Учуу алдында текшерүү: Always perform a thorough pre-flight check. Ensure all control surfaces move freely and correctly in response to transmitter inputs. Verify battery levels for both the transmitter and the vehicle.
2. Күйгүзүү ырааттуулугу: Power on your transmitter first, then power on the receiver in your vehicle. This ensures the receiver establishes a connection with the transmitter before any control inputs are sent.
3. Телеметрия мониторинги: Utilize the Fly-By Telemetry feature to monitor critical data such as battery voltage, signal strength, and other relevant parameters directly from your Spektrum Transmitter.
4. Stabilization Control: If stabilization is enabled, use the assigned switch on your transmitter to activate or deactivate it as needed during flight. Adjust the master gain via the assigned dial for optimal performance.
5. Операциядан кийинки: After use, power off the receiver in your vehicle first, then power off your transmitter. Disconnect the vehicle's battery.

Always operate your remote-controlled vehicle in a safe and open environment, away from people, animals, and obstacles. Adhere to local regulations and guidelines for RC vehicle operation.

Техникалык тейлөө

Proper maintenance ensures the longevity and reliable performance of your Spektrum SRXL2 DSMX Receiver (SPM4650C).

• Тазалыкты сактоо: Regularly inspect the receiver for dirt, dust, or debris. Gently clean with a soft, dry brush or compressed air. Avoid using liquids or solvents.
• Байланыштарды текшерүү: Periodically verify that all wire connections (power, servo, antenna) are secure and free from damage. Loose connections can lead to intermittent signal loss.
• Антеннаны жайгаштыруу: Ensure antennas are positioned correctly and are not kinked, cut, or damaged. Proper antenna orientation is crucial for optimal signal reception.
• Курчап турган чөйрөнү коргоо: Protect the receiver from moisture, extreme temperatures, and direct sunlight. If operating in dusty or wet conditions, consider additional protective measures for the receiver.
• Сактагыч: Колдонулбаган учурда кабыл алгычты кургак, салкын жерде сактаңыз.

Проблемаларды чечүү

If you encounter issues with your Spektrum SRXL2 DSMX Receiver (SPM4650C), refer to the following common troubleshooting steps:

• Сигнал жок/башкарууну жоготуу:
  • Verify the receiver is correctly bound to the transmitter. Re-bind if necessary.
  • Check all power connections to the receiver and ensure the battery is charged.
  • Inspect antenna placement and condition. Ensure they are not obstructed or damaged.
  • Confirm the transmitter is powered on and operating on the correct protocol.
• Intermittent Performance:
  • Check for potential sources of interference (e.g., other 2.4GHz devices, metal objects near antennas).
  • Ensure the receiver is securely mounted and not subject to excessive vibration.
  • Verify all servo connections are firm.
• Туура эмес контролдук жооп:
  • Check your transmitter's channel assignments and servo directions.
  • Ensure the correct aircraft type is programmed into the receiver (if applicable for stabilization).
  • Recalibrate your ESC (Electronic Speed Controller) if throttle response is erratic.
• Failsafe Not Working:
  • Re-set the failsafe positions as described in the Setup section.
  • Ensure the receiver is receiving power when testing failsafe.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information, technical support, or service inquiries regarding your Spektrum SRXL2 DSMX Receiver (SPM4650C), please refer to the official Spektrum website or contact Horizon Hobby, LLC directly.

It is recommended to retain your proof of purchase for any warranty claims. Always consult the manufacturer's official resources for the most up-to-date support and service details.