Introduction
The XIAOMI MIJIA Lint Remover is a portable fabric shaver designed to efficiently remove lint, fuzz, and pills from various types of clothing and fabrics. Its compact design and rechargeable battery make it convenient for home use and travel, helping to restore the fresh appearance of your garments.
Кутуда эмне бар
- XIAOMI MIJIA Lint Remover Unit
- USB Type-C кубаттоочу кабель
- Тазалоочу щетка

Image: The lint remover unit alongside its retail packaging, showcasing the compact design and included accessories.
Продукт өзгөчөлүктөрү
- 0.35mm Micro-Arc Knife Net: Designed to prevent damage to clothes by avoiding deformation of the knife net.
- 5-Blade Whirlwind Floating Cutter Head: Increases shearing efficiency for effective fluff removal.
- Negative Pressure Centrifugal Fan Blade: Features a new design for stable and reliable suction.
- Anti-Backflow Air Duct Design: Prevents lint from flowing back and re-soiling clothes.
- Double Safety Protection Device: Automatically cuts off power when the cutter head cover or lint bin is removed.
- 90 Minutes Long Endurance: Provides extended use with a 1300mAh lithium battery and two hours of fast charging.
- Hidden Indicator Light: Displays the machine's working status and power level.
- Transparent Lint Bin: Allows users to easily monitor the accumulated lint.
Жайгашуу
- Баштапкы төлөм: Before first use, fully charge the lint remover. Connect the provided USB Type-C cable to the charging port on the device and plug the other end into a compatible USB power adapter (not included). The hidden indicator light will show charging status.
- Түзмөктү текшерүү: Ensure the lint bin is securely attached and the cutter head cover is properly in place before operation.

Image: The compact design of the lint remover, easily held in one hand, ready for use.
Операция
- кездемени даярдоо: Lay the garment or fabric flat on a hard, smooth surface. Ensure the fabric is taut to prevent it from being pulled into the shaver.
- Күйгүзүү: Press the power button located on the device to turn it on. The indicator light will illuminate.
- Apply to Fabric: Gently glide the shaver head over the pilled or lint-covered area. Apply light, even pressure. Avoid pressing too hard, as this can damage the fabric or the device.
- Жыйынтыктарды байкаңыз: Continue moving the shaver over the affected areas until the lint and pills are removed. The transparent lint bin allows you to see the collected debris.
- Өчүрүү: Once finished, press the power button again to turn off the device.

Image: The lint remover being used on a garment, demonstrating the gentle gliding motion required for effective lint removal.

Image: The lint remover effectively removing pills from a coat, showcasing its versatility on different fabric types.
Техникалык тейлөө
- Emptying the Lint Bin: After each use, or when the transparent bin appears full, slide off the lint collection container. Dispose of the collected lint.
- Кесүүчү башты тазалоо: Use the provided cleaning brush to gently remove any remaining lint or debris from the cutter head and the inside of the device. Ensure the device is turned off before cleaning.
- Кайра чогултуу: Securely reattach the lint bin and cutter head cover.

Image: The lint remover with its collection bin detached, revealing the accumulated lint and demonstrating the ease of cleaning.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөй жатат. | Low battery; Safety protection activated. | Charge the device fully. Ensure the lint bin and cutter head cover are correctly installed. |
| Lint not effectively removed. | Lint bin is full; Blades are dull or clogged; Incorrect usage. | Empty and clean the lint bin. Clean the cutter head with the brush. Ensure fabric is flat and taut, and apply gentle, even pressure. |
| Иш учурунда адаттан тыш ызы-чуу. | Lint or debris caught in blades; Loose parts. | Turn off and carefully clean the cutter head. If the issue persists, contact customer support. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Xiaomi Mijia |
| Продукт модели | MQXJQ01KL |
| Таза Салмак | 213г |
| Продукциянын өлчөмдөрү | 145x62x65mm (5.71"H x 2.44"W x 2.56"D) |
| Продукт түсү | Ак |
| Киргизүү параметрлери | 5V == 1A |
| Rated Voltage | DC3.7V |
| Номиналдуу кубаттуулук | 2W |
| Батарея түрү | 1300mAh литий батареясы |
| Заряддоо убактысы | Болжол менен 2 саат |
| Иштөө убактысы | Болжол менен 90 мүнөт |
| Материал | Stainless Steel (Blades/Handle) |
Кепилдик жана колдоо
Кепилдик маалыматы, техникалык колдоо же тейлөө боюнча суроо үчүн расмий Xiaomi'ге кайрылыңыз webсайтка же жергиликтүү ыйгарым укуктуу дилериңизге кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
Кошумча булактарды жана көп берилүүчү суроолорду алуу үчүн, баш багыңыз Амазонкадагы Xiaomi дүкөнү.





