TICCI T8VB Vibrating Alarm Watch User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

Коопсуздук маалыматы

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• Do not attempt to open the watch casing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

Продукт бүттүview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

Сүрөт 1: Алдыңкы view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

Баскыч А: Mode Selection / Backlight
B баскычы: Set / Adjust Up
C баскычы: Adjust Down / Start/Stop (Stopwatch/Countdown)
D баскычы: Кулпу/ачуу

Жайгашуу

1. Initial Power On / Battery

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. Убакыт жана дата орнотуу

1. From the Time Mode display, press and hold Б баскычы for approximately 2 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. Басыңыз А баскычы to cycle through the settings: Hour → Minute → Year → Month → Date.
3. Колдонуу Б баскычы to increase the flashing value and C баскычы аны азайтуу үчүн.
4. Бардык жөндөөлөр тууралангандан кийин, баскычты басыңыз Б баскычы орнотуу режиминен чыгуу үчүн кайра.
5. To switch between 12-hour and 24-hour format, press C баскычы while the hour digits are flashing during time setting.

Иштөө нускамалары

1. Режимди тандоо

Басыңыз А баскычы repeatedly to cycle through the different modes:

• Убакыт режими: Учурдагы убакытты, датаны жана жуманын күнүн көрсөтөт.
• Ойготкуч режими: Allows setting and managing up to 8 individual alarms.
• Секундомер режими: Иш-чаралардын убактысын эсептөө үчүн.
• Артка эсептөө режими: For setting a countdown timer.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. Кириңиз Ойготкуч режими басуу менен А баскычы дисплейде "AL" пайда болгонго чейин.
2. Басып кармап туруңуз Б баскычы for approximately 2 seconds until the alarm number (1-8) flashes.
3. Колдонуу А баскычы to select the alarm you wish to set (A1, A2, A3, etc.).
4. Басыңыз Б баскычы to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. Колдонуу Б баскычы саатты тууралоо үчүн жана C баскычы мүнөттү тууралоо үчүн.
6. Убакытты койгондон кийин басыңыз А баскычы to select the alarm type:
   • ЭКИ: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. Басыңыз Б баскычы to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use А баскычы to select the alarm, then press C баскычы анын абалын которуу үчүн.

3. Артка эсептөө таймери

The countdown timer can be set from 15 minutes up to 24 hours.

1. Кириңиз Артка саноо режими басуу менен А баскычы until "TR" appears on the display.
2. Басып кармап туруңуз Б баскычы for approximately 2 seconds until the hour digits flash.
3. Колдонуу Б баскычы саатты тууралоо үчүн жана C баскычы to adjust the minute for the countdown duration.
4. Басыңыз Б баскычы to save the countdown setting.
5. Басыңыз C баскычы артка санаууну баштоо же тындыруу үчүн.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. Секунд

1. Кириңиз Секундомер режими басуу менен А баскычы дисплейде "ST" пайда болгонго чейин.
2. Басыңыз C баскычы секундомерди баштоо.
3. Басыңыз C баскычы секундомерди тындыруу үчүн кайрадан басыңыз.
4. Тыныгуу учурунда басыңыз Б баскычы секундомерди нөлгө коюу үчүн.

5. Арткы жарык

Басыңыз А баскычы briefly in any mode to activate the super bright EL backlight for easy viewжарык аз шарттарда.

Figure 3: Watch display with backlight activated.

6. Lockout Feature

To prevent accidental changes to settings, the watch includes a lockout feature.

• үчүн Кулпу the watch: Press and hold Б баскычы жана C баскычы simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• үчүн Кулпуну ачуу the watch: Press and hold Б баскычы жана C баскычы simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

Техникалык тейлөө

1. Сууга туруктуулук

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is сунушталбайт for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. Тазалоо

Clean the watch and strap regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the finish or seals.

3. Батареяны алмаштыруу

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

Проблемаларды чечүү

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• Баскычтар жооп бербейт: The watch may be in lockout mode. Press and hold Б баскычы жана C баскычы simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• Сааттын ичиндеги суу: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

Техникалык шарттар

4-сүрөт: Сааттын өлчөмдөрү.

Кепилдик жана колдоо

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI webсайт.