Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ikea KALLROR 503.570.02 Stainless Steel Cabinet Handles. Please read these instructions carefully before proceeding with installation to ensure proper and safe use.
Продукт бүттүview
The Ikea KALLROR 503.570.02 handles are designed to offer a modern aesthetic and functional grip for your kitchen cabinets or drawers. This set includes two handles and all necessary screws for a complete installation.
This image displays two sleek, cylindrical stainless steel cabinet handles, along with four silver screws. The handles have a brushed finish, and each handle is shown with two mounting posts. The screws are designed to secure the handles to cabinet doors or drawers.
Техникалык шарттар
| Модель номери | 503.570.02 |
| Бренд | Ikea |
| Бир комплекттеги саны | 2 туткасы |
| Колдун узундугу | 213 мм |
| Handle Depth | 38 мм |
| Hole Spacing (center-to-center) | 160 мм |
| Drilled Hole Diameter | 5 мм |
| Ылайыктуу эшик калыңдыгы | 16 ммден 21 ммге чейин |
| Handle/End Cap Material | Дат баспаган болот |
| Plastic Parts Material | Полиэтилен пластик |
| Камтылган компоненттер | Орнотуу жабдыктары (бурамалар) |
| Салмагы | 170 грамм |
Орнотуу жана орнотуу
Installing your Ikea KALLROR cabinet handles is a straightforward process. Follow these steps carefully for a secure attachment.
Керектүү куралдар
- Бургулоо
- Drill bit (5 mm diameter)
- Өлчөөчү лента же сызгыч
- Карандаш
- Бурагыч (Филипс башы сунушталат)
Орнотуу кадамдары
- Өлчөө жана белгилөө: Carefully measure and mark the desired position for the handle on your cabinet door or drawer front. Ensure the marks for the two screw holes are precisely 160 mm apart (center-to-center).
- Бургулоо тешиктери: Using a 5 mm drill bit, carefully drill through the cabinet door or drawer front at the marked positions. Ensure the holes are straight and clean.
- Тиркетүү туткасы: Align the handle with the drilled holes. Insert the provided screws from the inside of the cabinet door or drawer through the drilled holes and into the handle posts.
- Коопсуз тутка: Tighten the screws firmly with a screwdriver until the handle is securely attached. Ашыкча катуулабагыла, as this may damage the cabinet material.
- Кайталоо: Repeat the process for the second handle if installing a set.
Important: These handles are suitable for door thicknesses between 16 mm and 21 mm. Verify your cabinet door thickness before drilling.
Операция
The Ikea KALLROR cabinet handles are designed for simple and reliable operation. Grasp the handle firmly to open or close cabinet doors and drawers as needed.
Техникалык тейлөө
To ensure the longevity and appearance of your stainless steel handles, follow these maintenance guidelines:
- Тазалоо: Wipe regularly with a soft, damp cloth. For stubborn marks, use a mild detergent solution. Avoid abrasive cleaners, scouring pads, or chemical solvents, as these can damage the stainless steel finish.
- Кургатуу: Always dry the handles thoroughly after cleaning to prevent water spots and maintain their luster.
- Текшерүү: Periodically check the screws for tightness. If a handle feels loose, gently tighten the screws with a screwdriver.
Проблемаларды чечүү
Handle is Loose
If the handle feels loose, gently tighten the screws from the inside of the cabinet door or drawer. Ensure not to overtighten.
Орнотуу кыйынчылыгы
Ensure the drilled holes are precisely 160 mm apart (center-to-center) and that the drill bit used was 5 mm in diameter. Verify your cabinet door thickness is within the specified 16-21 mm range.
Колдоо
For further assistance or inquiries regarding your Ikea KALLROR cabinet handles, please refer to the official Ikea webсайтка же Ikea кардарларды тейлөө кызматына түздөн-түз кайрылыңыз.
