Ikea KALLROR 103.570.04 Stainless Steel Cabinet Handles - Installation and Care Manual

1. Киришүү

Thank you for choosing Ikea KALLROR cabinet handles. These stainless steel handles are designed to provide a modern aesthetic and reliable functionality for your kitchen or furniture. This manual contains important information regarding the safe installation, proper use, and maintenance of your new handles. Please read it thoroughly before proceeding with installation.

2. Коопсуздук маалыматы

• Always use appropriate safety gear, such as eye protection, when drilling.
• Ensure the drilling area is clear of electrical wires or plumbing before drilling.
• Муунтуп калуу коркунучун алдын алуу үчүн, бурамалар сыяктуу майда бөлүктөрүн балдар жетпеген жерде сактаңыз.
• Do not overtighten screws, as this may damage the handle or the cabinet door/drawer.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 2 x Ikea KALLROR Cabinet Handles (Stainless Steel)
• Mounting Screws (suitable for door thickness 16-21 mm)

This image displays two Ikea KALLROR cabinet handles made of stainless steel, along with the necessary mounting screws. The handles are cylindrical bars, designed for a modern aesthetic, and are shown ready for installation.

4. Орнотуу жана орнотуу

Follow these steps to correctly install your KALLROR cabinet handles:

1. Өлчөө жана белгилөө: Determine the desired position for your handle on the cabinet door or drawer. The hole spacing for these handles is 352 mm. Use a ruler and pencil to accurately mark the two drilling points.
2. Бургулоо тешиктери: Using a 5 mm drill bit, carefully drill through the marked points. Ensure the drill is perpendicular to the surface to create clean holes.
3. Туткаларды бекитүү: From the back side of the cabinet door/drawer, insert the provided screws through the drilled holes. Align the handle with the screws on the front side and gently tighten the screws until the handle is secure. Do not overtighten.

5. Колдонуу

The Ikea KALLROR handles are designed for opening and closing cabinet doors and drawers. Grip the handle firmly and apply gentle, even pressure to operate the cabinet mechanism. Avoid excessive force or sudden movements to prevent damage to the handle or furniture.

6. Техникалык тейлөө жана кам көрүү

To maintain the appearance and longevity of your stainless steel handles:

• Тазалоо: Wipe the handles regularly with a soft cloth dampсуу же жумшак, абразивдүү эмес тазалоо эритмеси менен.
• Кургатуу: Always dry the handles thoroughly after cleaning to prevent water spots or streaks.
• Катуу химиялык заттардан алыс болуңуз: Do not use abrasive cleaners, steel wool, or chemical solvents, as these can scratch or damage the stainless steel finish.
• Мезгил-мезгили менен текшерүү: Periodically check the tightness of the mounting screws and retighten if necessary.

7. Кыйынчылыктарды

• Бош тутка: If a handle feels loose, gently tighten the mounting screws from the inside of the cabinet door or drawer. Do not overtighten.
• Scratches on Handle: Minor scratches on stainless steel can sometimes be buffed out with a specialized stainless steel polish and a soft cloth, following the grain of the steel. For deeper scratches, professional repair may be required.
• Орнотуудагы кыйынчылык: Ensure that the drilled holes are precisely 352 mm apart and that the drill bit used was 5 mm in diameter. Verify that the cabinet door/drawer thickness is between 16 mm and 21 mm.

8. Техникалык шарттар

9. Кепилдик маалыматы

Specific warranty details for the Ikea KALLROR 103.570.04 cabinet handles are not available in this document. Please refer to your purchase receipt or contact Ikea customer service for information regarding applicable warranties.

10. Кардарларды колдоо кызматы

For further assistance, questions, or to report any issues with your Ikea KALLROR cabinet handles, please contact Ikea customer support through their official website or visit your nearest Ikea store. Have your product model number (103.570.04) and purchase details ready when contacting support.