Продукт бүттүview
The VANGUARD VESTA FB 235AB is a lightweight and compact aluminum travel tripod kit designed for portability while providing a stable base for mirrorless or DSLR camera systems. This kit includes an aluminum tripod and an Arca Swiss compatible ball head.
With a maximum load capacity of 9.9 pounds, it is suitable for most camera setups. The 23mm aluminum legs feature 5 sections, allowing the tripod to fold down to a compact 14.8 inches for easy transport. The VESTA FB models are equipped with quick flip leg locks for secure and rapid setup.
Despite its compact size, the tripod extends to 56 inches. For macro and low-angle photography, it offers three easy-set leg angles (21°, 50°, and 80°) and includes a low angle adaptor, enabling the removal of the central column to get closer to the ground. The central column can also be reversed for alternative low-angle shooting.
The included VESTA T-51 Ball Head is Arca Swiss compatible, featuring a large locking knob for easy adjustments and a QS-64 quick release plate. A separate pan-lock on the head allows for smooth panoramic movements without affecting the camera's level.
Figure 1: The Vanguard Vesta FB 235AB Compact Travel Tripod in its fully extended configuration, showcasing the ball head and leg structure.
Эмне камтылган
Upon unboxing your Vanguard Vesta FB 235AB, please verify that all components are present:
- Vanguard Vesta FB 235AB Tripod with integrated VESTA T-51 Ball Head
- QS-64 Quick Release Plate
- Төмөн бурчтуу адаптер
Орнотуу колдонмосу
1. Штативди жайып салуу
To prepare the tripod for use, first release the leg angle locks located at the top of each leg. Gently pull each leg outwards until it clicks into one of the three available angle positions. For maximum stability, ensure all legs are set to the same angle.
Figure 2: The Vanguard Vesta FB 235AB in its folded, compact state for transport.
Figure 3: Detail of the quick flip leg locks, allowing for rapid leg extension and retraction.
2. Extending the Legs
Each leg consists of multiple sections. To extend a leg section, open the corresponding quick flip lock. Pull the leg section outwards to the desired length, then firmly close the flip lock to secure it. Repeat for all sections on all three legs until the tripod reaches the desired height.
4-сүрөт: View of the multi-section legs and their individual quick flip locks.
3. Камераны орнотуу
The VESTA T-51 Ball Head uses an Arca Swiss compatible QS-64 quick release plate. Attach the QS-64 plate to the bottom of your camera by screwing the D-ring screw into the camera's tripod mount. Ensure it is tightened securely.
To mount the camera onto the ball head, loosen the main locking knob on the ball head. Align the quick release plate with the clamp on the ball head and slide it in. Once positioned, tighten the main locking knob firmly to secure the camera. Always double-check that the camera is securely attached before releasinкармагычыңызды бекемдеңиз.
Иштөө нускамалары
Топтун башын тууралоо
The VESTA T-51 Ball Head allows for flexible camera positioning. Loosen the large main locking knob to adjust the camera's angle and tilt. Once the desired position is achieved, tighten the knob firmly to lock the camera in place.
For panoramic shots, use the separate pan-lock knob located at the base of the ball head. Loosen this knob to rotate the camera horizontally without affecting the tilt. Tighten it to lock the panning movement.
5-сүрөт: Детальдуу view of the VESTA T-51 Ball Head, showing the main locking knob and separate pan-lock.
Using the Central Column
The central column can be extended for additional height. Loosen the central column locking knob, raise the column to the desired height, and then tighten the knob securely. For low-angle or macro photography, the central column can be reversed or removed entirely using the low angle adaptor.
To reverse the central column: Fully extend and remove the central column from the tripod. Invert the column and reinsert it into the tripod base, securing it with the central column locking knob. This allows for shooting from directly above or very close to the ground.
Figure 6: The tripod configured for low-angle photography, demonstrating the reversed central column.
7-сүрөт: жогорудан ылдыйга view of the tripod with legs splayed wide, suitable for very low-angle shots or increased stability.
Figure 8: The Vanguard Vesta FB 235AB in use with a spotting scope, demonstrating its versatility for various optical equipment.
Техникалык тейлөө
To ensure the longevity and optimal performance of your Vanguard Vesta FB 235AB tripod, follow these maintenance guidelines:
- Тазалоо: After use, especially in dusty, sandy, or wet environments, wipe down the tripod with a clean, damp cloth. Avoid using harsh chemicals. For sand or grit in leg sections, extend them fully and clean thoroughly.
- Майлоо: Periodically check the movement of leg sections and flip locks. If they become stiff, a small amount of silicone-based lubricant can be applied to the moving parts. Avoid oil-based lubricants as they can attract dust.
- Сактагыч: Store the tripod in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storage to prevent corrosion.
- Текшерүү: Regularly inspect all screws, bolts, and locking mechanisms for tightness. Tighten any loose components to maintain stability.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Leg sections are stiff or difficult to extend/retract. | Accumulation of dirt, dust, or sand; lack of lubrication. | Clean leg sections thoroughly. Apply a small amount of silicone-based lubricant to the sliding surfaces. |
| Quick flip locks do not hold legs securely. | Locks are worn or dirty; tension screw needs adjustment. | Clean the lock mechanism. Check for an adjustment screw (often an Allen key type) near the hinge of the flip lock and tighten slightly if loose. |
| Ball head movement is not smooth or locks loosely. | Main locking knob not tightened sufficiently; internal mechanism dirty. | Ensure the main locking knob is fully tightened. If issues persist, clean the ball head exterior and contact support if internal cleaning is suspected. |
| Camera wobbles on the quick release plate. | Quick release plate not securely attached to camera; plate not fully seated in ball head clamp. | Ensure the D-ring screw on the QS-64 plate is tightly fastened to the camera. Verify the plate is fully inserted into the ball head clamp жана clamp's locking knob is firmly tightened. |
Техникалык шарттар
| Модель аты | Vesta FB235AB |
| Бренд | АВАНГАРД |
| Материал | Алюминий |
| Максималдуу бийиктик | 56 дюйм (142 см) |
| Катталган узундук | 14.8 дюйм (37.6 см) |
| Элемент Салмагы | 2.7 Pounds (1.22 kg) - Note: Product data lists 1 pound / 16 ounces, but description states 2.7 pounds. Using description for consistency with portability claims. |
| Салмагы Limit | 9.9 Pounds (4.5 kg) - Note: Product data lists 8.8 pounds, but description states 9.9 pounds. Using description for consistency. |
| Бут бөлүмдөрү | 5 |
| Буттун диаметри | 23мм |
| Бут бурчтары | 21°, 50°, 80° |
| Tripod баш түрү | Ball Head (VESTA T-51) |
| Quick Чыгарган Plate | QS-64 (Arca Swiss Compatible) |
| Түс | Кара |
Кепилдик жана колдоо
VANGUARD products are designed and manufactured to high-quality standards. For specific warranty information, terms, and conditions, please refer to the warranty card included with your product or visit the official VANGUARD webсайт.
For technical support, spare parts, or service inquiries, please contact VANGUARD customer service through their official channels. You can often find contact information and FAQs on the brand's official webсайт же алардын Amazon бренд дүкөнү:
