Okin 4 баскычтуу 5-пиндүү электр менен иштеген кресло, USB колдонуучу колдонмосу менен

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Okin 4-Button 5-Pin Power Recliner Hand Controller with USB. This replacement handset is designed for electric lift chairs and power recliners, offering convenient control over reclining functions and a built-in USB charging port for mobile devices.

Image: The Okin 4-Button 5-Pin Power Recliner Hand Controller, showing the control unit with two buttons and a USB port, connected to a 5-pin DIN plug via a cable.

Коопсуздук маалыматы

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in injury or damage.

• Зыян келтирбөө үчүн электр шнурунун жылуулук булактарынан алыс кармаңыз.
• Avoid placing heavy objects on the recliner that could cause instability or tipping.
• Always turn off the power to the recliner before attempting any adjustments, installation, or maintenance.
• Ensure all connections are secure and properly seated to prevent electrical hazards.

Продукт өзгөчөлүктөрү

• Controls up to two actuators for recliner movement.
• Integrated USB charging port: 5V 2A output for charging mobile devices.
• Cable length: Approximately 130 cm (4.1 Ft).
• Designed to work with various power recliners, including Okin, Ashley Furniture, Dewert, Flexteel, and Limoss.

Пакеттин мазмуну

• 1 x Okin 4-Button 5-Pin Power Recliner Hand Controller with USB

Орнотуу жана орнотуу

Before installation, ensure the recliner's power supply is disconnected from the wall outlet.

1. Identify the Existing Handset Connection: Locate the existing handset cable connected to the recliner's motor or control box. This is typically a 5-pin DIN connector.
2. Disconnect Old Handset (if applicable): Carefully unplug the old handset's 5-pin connector from the recliner's control system.
3. Connect New Handset: Align the 5-pin connector of the new Okin hand controller with the corresponding port on your recliner's motor or control box. Gently push until it is securely seated.
4. Mount the Handset: The hand controller is designed to be recessed into the armrest or side of the recliner. Ensure the opening in your recliner is compatible with the dimensions of the new switch. Minor modifications to the opening may be required for a proper fit.

Сүрөт: Жакын план view of the 5-pin DIN connector, which connects the hand controller to the recliner's motor system.

Image: Diagram showing the dimensions of the recliner switch, including faceplate width (4.06 inches), height (1.61 inches), and overall depth (1.26 inches).

Эскертүү: If the existing opening is too small, careful enlargement may be necessary. If it is too large, additional mounting solutions may be required.

Сүрөт: Арткы view of the recliner switch, displaying the product label with model information (P/N: JLDK-15, DC 24V 2A, USB 5V 2A) and manufacturer details.

Иштөө нускамалары

The Okin hand controller features two primary buttons for recliner movement and a central USB port.

Сүрөт: алдыңкы view of the recliner switch, clearly showing the two control buttons and the central USB charging port.

• Жатуу/узартуу: басып, кармап туруңуз сол баскыч to extend the footrest and recline the chair. Release the button to stop at the desired position.
• Тартуу/Тик абалда кармоо: басып, кармап туруңуз оң баскыч to retract the footrest and return the chair to an upright position. Release the button to stop at the desired position.
• USB заряддоо: The central USB port provides 5V 2A power for charging compatible mobile devices. Simply plug your device's USB cable into the port.

Эскертүү: The specific movement (e.g., footrest only, backrest only, or synchronized movement) depends on your recliner's internal wiring and motor configuration. Some recliners may link the headrest movement with the main recliner function.

Техникалык тейлөө

To ensure the longevity and proper function of your hand controller:

• Тазалоо: Wipe clean the surface of the hand controller with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the finish.
• Кабельге кам көрүү: Do not pull or yank the cable. Ensure it is not pinched or tangled, which can lead to internal wire damage.
• Экологиялык шарттар: Keep the hand controller away from excessive moisture, direct sunlight, and extreme temperatures.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the documentation provided with your original recliner or contact the retailer where you purchased this replacement part. Keep your purchase receipt for proof of purchase.

For further assistance, you may also visit the Okin brand store on Amazon: Okin дүкөнү