addlon Floor Lamp with 3 Color Temperatures, Model gjynf-832

1. Киришүү

This manual provides instructions for the assembly, operation, and maintenance of your new addlon Floor Lamp, Model gjynf-832. This lamp is designed to provide adjustable lighting with three distinct color temperatures, suitable for various indoor environments such as living rooms, bedrooms, and offices. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Image 1.1: The addlon Floor Lamp кадимки бөлмө шартында.

2. Коопсуздук нускамалары

• l камсыз кылууamp is unplugged from the power outlet before assembly, cleaning, or bulb replacement.
• l иштетпеңизamp with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
• Бул лamp is intended for indoor use only. Do not expose to water or high humidity.
• Use only the specified bulb type (E26 base, 9W LED bulb included). Do not exceed the maximum wattage.
• l сактаңызamp күйүүчү материалдардан алыс.
• Ensure the base is stable on a flat surface to prevent tipping.
• л өзгөртүүгө же ажыратууга аракет кылбаңызamp beyond the instructions provided in this manual.

3. Пакеттин мазмуну

Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, please contact addlon customer support.

• Lamp База
• Lamp Уюлдук бөлүктөрү (адатта 3-4 бөлүк)
• Lamp Head with Curved Arm
• зыгыр Лampshade (rolled)
• 9W LED Bulb (E26 base)
• User Manual

Сүрөт 3.1: Пакетке кирген бардык компоненттер.

4. Орнотуу жана чогултуу

Assembly typically takes approximately 15 minutes and can be completed by one person. Follow these steps:

1. Базаны тиркөө: Screw the lowest pole section into the lamp base clockwise until secure.
2. Уюлду чогултуу: Connect the remaining pole sections by screwing them clockwise. Ensure each section is tightly connected to prevent wobbling.
3. L тиркөөamp башчысы: l бураңызamp head with the curved arm onto the top pole section.
4. Л чогултууampкөлөкө: зыгыр буласынан лampshade arrives rolled. Unroll it and connect the two vertical edges using the integrated hook-and-loop fastener strip. Place the assembled lampлге көлөкөamp head, ensuring it sits securely.
5. LED лампасын орнотуу: Carefully screw the provided 9W LED bulb into the E26 socket on the lamp башты. Өтө катуу тартпаңыз.

Image 4.1: Visual guide for lamp чогулуш.

5. Иштөө нускамалары

The addlon Floor Lamp features a convenient foot switch and offers three color temperature settings.

5.1 Power On/Off and Color Temperature Selection

lamp into a standard 110V AC power outlet. The lamp is operated by a foot switch located on the power cord.

• Биринчи басма: l буратamp ON to Warm White (3000K).
• Экинчи басма: Changes the light to Cool White (4500K).
• Үчүнчү Басма: Changes the light to Daylight (6500K).
• Төртүнчү басма сөз: l буратamp ӨЧҮРҮҮ.

лamp cycles through these settings with each press of the foot switch.

Image 5.1: The three available color temperatures.

5.2 Жөнгө салынуучу Lamp Баш

лamp head is designed with an adjustable angle, allowing you to direct the light as needed. Gently pivot the lamp head to achieve the desired illumination direction. The lamp head can be adjusted up to 270 degrees horizontally and 90 degrees vertically.

Image 5.2: Lamp head adjustability.

6. Техникалык тейлөө

6.1 Тазалоо

Тазалоодон мурун, lamp is unplugged. Use a soft, dry cloth to wipe down the lamp pole and base. For the linen lampshade, a lint roller or a soft brush can be used to remove dust. Avoid using abrasive cleaners or solvents, as these can damage the finish or fabric.

6.2 Лампаны алмаштыруу

l камсыз кылууamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old bulb counter-clockwise and screw in a new E26 base LED bulb. It is recommended to use an LED bulb of similar wattage (9W) to maintain optimal performance and energy efficiency.

7. Кыйынчылыктарды

• Lamp күйгүзбөйт:
  • Кубат шнуру розеткага бекем сайылганын текшериңиз.
  • Дубал розеткасынын иштешин башка аспап менен текшерип текшериңиз.
  • Verify the bulb is screwed in correctly and is not burnt out. Replace if necessary.
• Жарык жымыңдайт:
  • Лампанын бекем сайылганын текшериңиз.
  • Бузулган лампочканы жокко чыгаруу үчүн башка лампочканы колдонуп көрүңүз.
• Lamp туруксуз:
  • Бардык полюс бөлүктөрү бири-бирине бекем сайылганын текшериңиз.
  • l коюңузamp тегиз, тегиз жерде.

8. Техникалык шарттар

Сүрөт 8.1: Продукциянын өлчөмдөрү.

9. Кепилдик жана колдоо

addlon proudly stands behind its products with a 2-year quality support. If you encounter any issues or have questions regarding your addlon Floor Lamp, please contact our customer support team. We are committed to providing assistance and ensuring your satisfaction.

For support, please refer to the contact information provided on the product packaging or the official addlon webсайт.