Elica WISE BL/A90 Range Hood User Manual

Introduction

Thank you for choosing the Elica WISE BL/A90 Range Hood. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and keep them for future reference.

Коопсуздук маалыматы

Маанилүү: Always disconnect the appliance from the power supply before performing any cleaning or maintenance. Installation must be carried out by a qualified technician in accordance with local regulations. Ensure adequate ventilation in the room when the range hood is used simultaneously with other gas or fuel-burning appliances.

• Капоттун астында жалындабаңыз.
• Do not leave frying pans unattended during use, as overheated oil can ignite.
• Өрт коркунучун алдын алуу үчүн май чыпкаларын дайыма тазалап туруңуз.
• Шайман физикалык, сезүү же акыл-эс жөндөмү начар же тажрыйбасы жана билими жок адамдар (анын ичинде балдар) тарабынан колдонууга арналбайт, эгерде алардын көзөмөлү же көрсөтмөсү болбосо.

Орнотуу жана орнотуу

The Elica WISE BL/A90 is designed for wall mounting. Proper installation is crucial for optimal performance and safety. Refer to the detailed installation diagram for precise measurements and mounting points.

1-сүрөт: Technical drawing showing the dimensions and mounting specifications for the Elica WISE BL/A90 range hood. This diagram illustrates the height, width, and depth measurements required for installation, including ducting options.

Ensure the mounting surface is strong enough to support the weight of the appliance. Connect the exhaust ducting according to local building codes. For recirculation mode, ensure carbon filters are installed (sold separately, if not included).

Иштөө нускамалары

The Elica WISE BL/A90 features intuitive touch controls and LED lighting for ease of use. The appliance offers four extraction levels to suit various cooking needs.

2-сүрөт: The Elica WISE BL/A90 range hood seamlessly integrated into a contemporary kitchen setting, demonstrating its sleek design and functional placement above a cooking surface.

Башкаруу панелин басыңыз

• Күйгүзүү/өчүрүү: Press the power symbol to turn the hood on or off.
• Желдетүүчү ылдамдыкты жөндөө: Use the '+' and '-' symbols to cycle through the four extraction levels (1-4).
• LED жарыктандыруу: Press the light bulb symbol to turn the LED lights on or off.

For optimal performance, activate the range hood a few minutes before cooking and leave it running for approximately 10-15 minutes after cooking to clear residual odors and steam.

Тейлөө жана тазалоо

Regular maintenance ensures the longevity and efficiency of your range hood. Always disconnect the power supply before cleaning.

Май чыпкалары

The appliance includes a grease filter. These metallic filters trap grease particles from cooking fumes. They should be cleaned frequently, at least once a month, depending on usage. They can be washed by hand using non-abrasive detergents or in a dishwasher at a low temperature.

Көмүртек чыпкалары (кайра циркуляция режими үчүн)

If your hood is operating in recirculation mode, it will be equipped with activated carbon filters (not included with all models). These filters cannot be washed and must be replaced every 3-6 months, depending on usage.

Сырткы тазалоо

Clean the exterior surfaces of the hood with a soft cloth dampened with a mild, non-abrasive detergent. Avoid using abrasive cleaners, alcohol, or corrosive products, especially on the black glass finish.

Проблемаларды чечүү

If you encounter issues with your Elica WISE BL/A90 range hood, refer to the following common problems and solutions:

• Капот күйбөйт: Check if the appliance is properly plugged into the power outlet. Verify the circuit breaker.
• Төмөн соруу күчү: Ensure grease filters are clean and not clogged. Check if the exhaust ducting is clear and not obstructed. For recirculation models, check if carbon filters need replacement.
• Ашыкча ызы-чуу: Ensure the hood is securely mounted. Check for loose components or obstructions in the fan.
• Жарыктар иштебейт: Check if the LED lights are switched on via the control panel. If individual LEDs are faulty, contact customer support for replacement.

Эгерде бул чечимдерди колдонгондон кийин маселе чечилбесе, квалификациялуу тейлөө кызматкерлерине кайрылыңыз.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Elica webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.