myTouchSmart 48707 айлануучу сырткы санарип короо таймеринин колдонмосу

Introduction

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Маанилүү коопсуздук маалыматы

• Электр шок коркунучу: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Туура Жерге салуу: Таймер туура жерге туташтырылганын текшериңиз.
• Ашыкча жүктөн коргоо: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Жайгашкан жери: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Outlet капкактары: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Шнур менен башкаруу: Route cords to prevent tripping hazards and damage.
• Тейлөө: Кандайдыр бир тейлөө же тазалоо иштерин жүргүзүүдөн мурун электр энергиясын өчүрүңүз.

Пакеттин мазмуну

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Instruction Manual

Продукт өзгөчөлүктөрү

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Санариптик таймер: Programmable with custom ON/OFF times.
• Жарык сенсору: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Аба ырайына туруктуу: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Ашыкча жүктөн коргоо: Integrated 15A/1875W circuit breaker for safety.

Жайгашуу

1. Коюмду чогултуу: Attach the stake sections together and then to the timer unit.
2. Жайгашкан жери: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Баштапкы кубат туташуу: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Таймерди баштапкы абалга келтирүү: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the RESET button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Түзмөктөрдү туташтыруу: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Иштөө нускамалары

1. Setting Day & Time

1. басып, кармап туруңуз СААТ баскычы.
2. Кармап жатканда СААТ, басыңыз ЖУМА button repeatedly until the desired day of the week appears at the top of the display.
3. Кармоону улантыңыз СААТ, жана басыңыз HOUR button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding СААТ, басыңыз MIN Учурдагы мүнөттү коюу үчүн баскычын кайра-кайра басыңыз.
5. бошотуңуз СААТ орнотууларды сактоо үчүн баскыч.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. басыңыз ПРОГ button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. басыңыз ЖУМА button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. басыңыз HOUR button to set the desired ON hour.
4. басыңыз MIN button to set the desired ON minute.
5. басыңыз ПРОГ button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the ПРОГ button again until "2 ON" appears, then repeat steps 2-6.
8. Бардык керектүү программаларды орноткондон кийин, баскычын басыңыз СААТ негизги экранга кайтуу үчүн баскычты басыңыз.

To clear a program: Ал эми viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• басып, кармап туруңуз КОЛ button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• АВТО КҮЙҮҮ: The timer will remain ON until the next programmed OFF time.
• АВТО ӨЧҮРҮҮ: The timer will remain OFF until the next programmed ON time.
• КОЛ: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Күн баткандан таң атканга чейин: The timer will automatically turn ON at dusk and remain ON until dawn.
• Артка саноо таймери: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. басыңыз ЖУМА жана HOUR buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Өчүрүү үчүн басыңыз ЖУМА жана HOUR buttons simultaneously again. "RND" will disappear.

6. Daylight Saving Mode

To adjust the time for Daylight Saving:

1. басыңыз HOUR жана MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Техникалык тейлөө

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Аппаратты жумшак менен тазалаңыз, гamp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.