Introduction
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Truper ENNE-160 16 Gauge Pneumatic Stapler. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
Figure 1: Truper ENNE-160 16 Gauge Pneumatic Stapler, side view.
Коопсуздук маалыматы
Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн электр шаймандарын колдонууда ар дайым негизги коопсуздук чараларын сактаңыз. Бул колдонмону келечекте маалымат алуу үчүн сактаңыз.
- Көздү коргоону кийүү: Учуучу таштандылардан коргоо үчүн ар дайым коргоочу көз айнек же көз айнекти тагыныңыз.
- Угуу коргоочу аппаратты кийүү: Пневматикалык шаймандардын ызы-чуусуна узак убакыт бою таасир этүү угуунун бузулушуна алып келиши мүмкүн.
- Аба менен камсыздоону өчүрүү: Always disconnect the air supply before making adjustments, clearing jams, or performing maintenance.
- Жумуш аймагын таза кармоо: Жумуш ордуңуз жакшы жарыктандырылганын жана башаламандыктын жоктугун текшериңиз.
- Коопсуз жумуш бөлүгү: Always secure the material you are working on to prevent movement.
- Never Point at People: Never point the tool at yourself or others, even if it is not connected to an air supply.
- Туура аба басымын колдонуу: Operate the tool within the specified air pressure range (75-110 PSI).
- Колдонуудан мурун куралды текшериңиз: Check for damaged parts, loose fasteners, or any other condition that may affect safe operation.
Продукт өзгөчөлүктөрү
The Truper ENNE-160 Pneumatic Stapler is designed for efficiency and user comfort. Key features include:
- Алюминий корпус: Durable and lightweight construction for extended use.
- Эргономикалык тутка: Designed for operator comfort and reduced fatigue.
- Ыкчам чыгаруу системасы: Facilitates easy clearing of jammed staples.
- Adjustable Depth Control: Allows precise control over staple depth.
- Metallic Contact Safety: Ensures staples are only fired when the tool is pressed against the workpiece.
- 360° Rotatable Air Exhaust Valve: Directs exhaust air away from the operator for improved comfort.
- Штапелдин шайкештиги: Uses staples from 3/4" to 2" in length.
- Иш басымы: Operates efficiently between 75 and 110 PSI.
- Картридж сыйымдуулугу: Holds up to 100 staples.
Figure 2: Key features and components of the Truper ENNE-160 Pneumatic Stapler.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | ENNE-160 |
| Staple Gauge | 16 Өлчөөчү |
| Материал | Алюминий |
| Иштөө басымы | 75 - 110 PSI (517 - 758 kPa) |
| Staple Lengths | 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2" |
| Картридж сыйымдуулугу | 100 степлер |
| Аба керектөө | 8.9 CFM @ 90 PSI (252 L/min @ 620 kPa) |
| Продукциянын өлчөмдөрү | 11 x 36 x 31 см (болжол менен 4.3 x 14.2 x 12.2 дюйм) |
| Продукт Салмагы | 3.6 кг (болжол менен 7.9 фунт) |
Figure 3: Dimensions of the Truper ENNE-160 Pneumatic Stapler.
Жайгашуу
- Аба менен камсыздоону туташтыруу:
- Ensure the air compressor is off and depressurized.
- Connect a 1/4" NPT quick-change connector to the air inlet of the stapler.
- Attach the air hose from your compressor to the stapler's connector.
- Set the air compressor pressure regulator to the recommended operating range of 75-110 PSI. Do not exceed 110 PSI.
- Степлерди жүктөө:
- Disconnect the air supply before loading staples.
- Locate the staple magazine release latch, typically at the rear of the magazine.
- Pull the magazine open or slide it back.
- Insert a strip of 16 gauge staples (3/4" to 2" length) into the magazine with the points facing down.
- Магазинди бекем бекитилгенге чейин жабыңыз.
- Adjust Depth Control:
- The stapler features an adjustable depth control mechanism.
- Rotate the depth adjustment knob or lever (refer to Figure 2 for location) to set the desired staple depth. Test on a scrap piece of material first.
Иштөө нускамалары
- Жумушчу бөлүгүн даярдоо: Ensure the material is clean, dry, and free of obstructions. Secure the workpiece if necessary.
- Connect Air: Reconnect the air supply to the stapler.
- Позиция куралы: Place the nose of the stapler firmly against the workpiece where you want to drive a staple. The metallic contact safety mechanism requires pressure against the surface to allow firing.
- Fire Staple: Squeeze the trigger to drive a staple. Release the trigger after each staple.
- Continuous Operation (if applicable): Some models allow for bump firing. If your model supports this, hold the trigger and bump the nose of the tool against the workpiece to drive staples rapidly. Always exercise caution with this mode.
- тыгындарды тазалоо: If a staple jam occurs, immediately disconnect the air supply. Use the quick-release system to open the magazine and carefully remove the jammed staple. Reconnect air only after the jam is cleared and the magazine is closed.
- Adjust Air Exhaust: The 360° rotatable air exhaust valve can be adjusted to direct exhaust air away from your face or the workpiece.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your pneumatic stapler. Always disconnect the air supply before performing any maintenance.
- Майлоо: Apply a few drops of pneumatic tool oil into the air inlet daily or before each use. This lubricates internal components. Do not use detergent oil or automotive oil.
- Тазалоо: Keep the tool clean and free of debris. Wipe down the exterior with a clean cloth. Periodically clean the magazine and nose area to prevent staple jams.
- Аба чыпкасы: If your air compressor has an inline air filter, ensure it is regularly cleaned or replaced to prevent contaminants from entering the tool.
- Түтүктөрдү жана арматураларды текшерүү: Regularly check air hoses and fittings for wear, leaks, or damage. Replace any damaged components immediately.
- Сактагыч: Store the stapler in a dry, clean environment when not in use. Disconnect it from the air supply.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Курал күйбөйт | No air supply; Low air pressure; Safety contact not engaged; Jammed staples; Trigger mechanism fault. | Check air connection and compressor pressure; Ensure tool nose is firmly pressed against workpiece; Disconnect air and clear jam; Contact service if trigger fault. |
| Staples not driven fully | Low air pressure; Depth control set too shallow; Incorrect staple length for material. | Increase air pressure (within limits); Adjust depth control deeper; Use appropriate staple length. |
| Staples jam frequently | Damaged staples; Incorrect staple size; Dirty magazine; Worn driver blade. | Use new, correct staples; Clean magazine; Inspect and replace driver blade if worn. |
| Air leaks from tool | Loose fittings; Worn O-rings or seals. | Tighten fittings; Lubricate tool; If leaks persist, contact service for seal replacement. |
Кепилдик жана колдоо
TRUPER products are manufactured to high-quality standards. For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official TRUPER webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
Өндүрүүчү: Truper SA de CV
