Introduction
This manual provides instructions for the installation, operation, and maintenance of the Volteck PA-APDO15-EEB wall plate, which includes one single-pole switch and one three-way switch. This product is designed for indoor use to control lighting or other electrical loads. Please read these instructions carefully before installation and retain them for future reference.
Коопсуздук маалыматы
ЭСКЕРТҮҮ: Электр тогуна урунуу коркунучу. Туура эмес орнотуу олуттуу жаракатка же өлүмгө алып келиши мүмкүн.
- Түзмөктү орнотуудан, тейлөөдөн же алып салуудан мурун ар дайым автоматтык өчүргүчтөн же сактандыргыч кутучасынан электр кубатын өчүрүңүз.
- Улантуудан мурун кубат өчүк экенин текшериңиз.
- Consult a qualified electrician if you are unsure about any part of these instructions.
- Туташуулар үчүн жез зымды гана колдонуңуз.
- Түзмөктүн көрсөтүлгөн электрдик кубаттуулук көрсөткүчтөрүнөн ашпаңыз.
- Бул продукт ички колдонуу үчүн гана.
Пакеттин мазмуну
- 1 Volteck PA-APDO15-EEB Wall Plate with 1 Single Switch and 1 Three-Way Switch
Техникалык шарттар
| Модель номери | PA-APDO15-EEB (Manufacturer's Model: 45601) |
| Материал | Поликарбонат (PC) |
| Түс | Ак |
| Өлчөмдөрү (L x W x Y) | 14.48 см x 11.79 см x 2.49 см (болжол менен 5.7 дюйм x 4.64 дюйм x 0.98 дюйм) |
| Салмагы | 90 г |
| Өзгөчөлүктөрү | Fluorescent night indicator, for indoor use |
Image: Product dimensions. The image displays the height as 118 mm and the length as 73 mm, providing a visual reference for the physical size of the wall plate.
Image: Product features. This image illustrates the polycarbonate material of the switch plate and points out the fluorescent indicator, which glows in the dark for easy location.
Installation (Wiring)
Before beginning installation, ensure the power supply to the circuit is turned off at the main electrical panel. Follow the wiring diagrams below carefully. If you are unfamiliar with electrical wiring, consult a qualified electrician.
Зымдар диаграммасы
Image: Connection Diagram. This diagram provides visual instructions for wiring both a single-pole switch and a three-way switch. It shows the connections for Line, Neutral, and Load wires, as well as traveler wires for the three-way setup.
Single-Pole Switch Wiring:
- Кирүүчүлөрдү туташтырыңыз Сап (L) wire (typically black or hot) to one of the switch's terminals.
- туташтыруу Load (L1) wire (going to the light fixture or appliance) to the other terminal of the switch.
- Бардык байланыштар коопсуз экенин текшериңиз.
Three-Way Switch Wiring:
A three-way switch system requires two three-way switches to control a single light fixture from two different locations.
- Identify the common terminal on both three-way switches. This is usually a different color screw or marked 'COM'.
- Кирүүчүлөрдү туташтырыңыз Сап (L) wire to the common terminal of the алгачкы үч тараптуу которуу.
- Экөөнү туташтыруу traveler wires (L1 and L2) between the remaining two terminals of the first switch and the corresponding traveler terminals of the экинчи үч тараптуу которуу.
- туташтыруу Load (L1) wire (going to the light fixture or appliance) to the common terminal of the экинчи үч тараптуу которуу.
- Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
After wiring, carefully place the switches and wires into the electrical box and secure the wall plate with screws. Restore power at the circuit breaker.
Иштөө нускамалары
To operate the switches, simply press the rocker switch up or down to turn the connected light or appliance on or off. The fluorescent indicator on the switch will glow faintly in the dark, making it easier to locate the switch in low-light conditions.
Техникалык тейлөө
The Volteck PA-APDO15-EEB wall plate requires minimal maintenance. To clean, gently wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or the polycarbonate material.
Проблемаларды чечүү
Light/Appliance Does Not Turn On:
- Күчтү текшерүү: Ensure the circuit breaker for the switch is in the 'ON' position.
- Check Bulb/Appliance: Verify that the light bulb is not burnt out or the appliance is functioning correctly.
- Зымдарды текшерүү: With power OFF at the breaker, carefully remove the wall plate and check that all wire connections are secure and correctly wired according to the diagram. Loose connections are a common cause of issues.
Fluorescent Indicator Not Glowing:
- The indicator requires exposure to light to charge and glow in the dark. Ensure it has been exposed to sufficient ambient light.
- If the switch is not receiving power, the indicator will not glow. Check power supply as described above.
If problems persist after checking these points, it is recommended to consult a qualified electrician.
Кепилдик жана колдоо
For warranty information or technical support, please refer to the documentation included with your purchase or contact Volteck customer service directly. Keep your proof of purchase for warranty claims.