Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lockset.
Коопсуздук маалыматы
- Орнотуу учурунда ар дайым тиешелүү коопсуздук каражаттарын, мисалы, кол кап жана көз айнекти кийиңиз.
- Колдонуудан мурун бардык компоненттердин бекем бекитилишин текшериңиз.
- Do not use excessive force when operating the lockset.
- Keep keys in a safe and accessible location, separate from the door.
Пакеттин мазмуну
Сиздин пакетте төмөнкү элементтер болушу керек:
- 2 x Keyed Entry Ball Knobs
- 2 x Single Cylinder Deadbolts
- 4 x KW1 Keys
- Adjustable Latches (for both knob and deadbolt)
- Strike Plates
- Монтаждоо бурамалар
- Орнотуу шаблоны (эгер камтылган болсо)
Image: All components of the Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt set, including two knobs and two deadbolts with their respective latches and strike plates.
Орнотуу жана орнотуу
Керектүү куралдар:
- Филлипс баш бурагычы
- Тасма өлчөгүч
- Карандаш
- Бургулоо (эгер жаңы эшикти даярдоо керек болсо)
- Wood Chisel (if new door preparation is needed)
Орнотуу кадамдары:
- эшикти даярдоо: Ensure your door has the correct bore holes (typically 2-1/8 inches for the lock body and 1 inch for the latch) and backset (2-3/8 inches or 2-3/4 inches). Use the provided template if drilling new holes.
- Latch орнотуу: Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with two small screws. Adjust the backset if necessary by twisting the latch mechanism.
- Install the Exterior Knob/Deadbolt: Place the exterior portion of the knob/deadbolt through the large bore hole, ensuring the spindle or tailpiece aligns with the latch mechanism.
- Install the Interior Knob/Deadbolt: Position the interior portion of the knob/deadbolt, aligning it with the exterior portion and the latch. Secure with the long mounting screws provided, tightening evenly.
- Strike Plate орнотуу: Mark the position of the latch bolt on the door frame. Chisel out a shallow recess for the strike plate and secure it with screws. Ensure the latch bolt engages smoothly.
- Сыноо операциясы: Close the door and test the knob and deadbolt with the key from both inside and outside to ensure smooth operation.
Иштөө нускамалары
Keyed Entry Knob:
- Сырттан бекитүү үчүн: Insert the key and turn it to lock the knob. Remove the key.
- Сырттан кулпуну ачуу үчүн: Insert the key and turn it to unlock the knob.
- Ичтен бекитүү үчүн: Press or turn the button/thumbturn on the interior knob.
- Ичтен ачуу үчүн: Turn the interior knob or button/thumbturn.
Бир цилиндрлүү бекиткич:
- Сырттан бекитүү үчүн: Insert the key and turn it to extend the deadbolt. Remove the key.
- Сырттан кулпуну ачуу үчүн: Insert the key and turn it to retract the deadbolt.
- Ичтен бекитүү үчүн: Turn the thumbturn on the interior side to extend the deadbolt.
- Ичтен ачуу үчүн: Turn the thumbturn on the interior side to retract the deadbolt.
Техникалык тейлөө
- Тазалоо: Кулпуну жумшак, d менен үзгүлтүксүз тазалап туруңузamp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the satin stainless steel finish.
- Майлоо: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dirt.
- Бурама тыгыздыгы: Check and tighten all mounting screws periodically to ensure the lockset remains securely attached to the door.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Ачкыч бурулбайт же катуу. | Ачкычтын оозундагы кир, эскирген ачкыч же туура эмес тегизделген цилиндр. | Clean keyway with graphite lubricant. Try a spare key. Check for proper cylinder alignment. |
| Latch bolt does not retract/extend fully. | Misaligned latch, bent components, or debris. | Check latch alignment and screw tightness. Clear any obstructions. Lubricate the latch mechanism. |
| Door does not close properly with lock engaged. | Misaligned strike plate or door frame issues. | Adjust the strike plate position. Inspect the door frame for warping or damage. |
| Knob/Deadbolt feels loose. | Бош монтаждоо бурамалар. | Tighten the mounting screws evenly. Do not overtighten. |
Техникалык шарттар
- Продукт түрү: Keyed Entry Knob and Single Cylinder Deadbolt
- Модел: B36L1BD
- Материал: Дат баспас болот, металл
- Бүтүрүү: Сатин дат баспас болот
- Баасы: 3 Grade (Residential)
- Эшик тапшыруу: Оң колу
- Жөнгө салынуучу арткы топтом: 2-3/8 inches (60mm) or 2-3/4 inches (70mm)
- Эшик калыңдыгы диапазону: 1-3/8 inches (35mm) to 1-3/4 inches (44mm)
- Keyway: KW1
- Keys Included: 4
- Продукциянын өлчөмдөрү: Болжол менен 3.3 x 12.4 x 9.8 дюйм (8.4 x 31.5 x 24.9 см)
- Ички/тышкы колдонуу: Сыртта
Кепилдик жана колдоо
For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Specific warranty terms may vary.
For technical support or further assistance, please contact the customer service department of your retailer or the manufacturer, Overstock.
