Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Коопсуздук нускамалары
Электр куралынын жалпы коопсуздук эскертүүлөрү:
- Жумуш аймагынын коопсуздугу: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Электр коопсуздугу: Түтүктөр, радиаторлор, диапазондор жана муздаткычтар сыяктуу жерге туташтырылган же жерге туташтырылган беттерге денеге тийбеңиз. Денеңиз жерге туташтырылган же жерге туташтырылган болсо, электр тогуна урунуп калуу коркунучу жогору.
- Жеке коопсуздук: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Электр куралын колдонуу жана сактоо: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Тейлөө: Электр шаймандарын жана аксессуарларын сактаңыз. Кыймылдуу бөлүктөрдүн туура эмес түзүлүшү же байланбагандыгы, тетиктердин сынышы жана электр шайманынын иштешине таасир эте турган башка жагдайлардын бар-жоктугун текшериңиз.
Specific Circular Saw Safety Warnings:
- Колду кесүүчү жерден жана бычактан алыс кармаңыз. Даярдоочу бөлүгүнүн астына жетпеңиз.
- Кесүү тереңдигин тууралаңыз to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Эч качан бузулган же туура эмес бычак шайбаларды же болтторду колдонбоңуз.
Продукт бүттүview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Негизги компоненттер:
- Негизги туткасы: Ergonomic grip for primary control and operation.
- Көмөкчү тутка: Provides additional stability and control during cutting.
- Күйгүзүү/өчүрүү: Моторду иштетет жана өчүрөт.
- Шпиндель кулпусу: Button used to lock the spindle for safe and easy saw blade changes.
- Blade Guard: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Тереңдикти жөндөө рычагы: Mechanism for setting the desired cutting depth.
- Конусту жөндөө рычагы: Mechanism for setting the desired cutting angle for bevel cuts.
- араа бычак: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Dust Extraction Adapter: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Жайгашуу
1. Батареяны орнотуу
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- Slide the battery pack into the receptacle until it clicks securely into place.
- Чыгаруу үчүн, батарея топтомундагы чыгаруу баскычын басып, аны сыртка жылдырыңыз.
2. Аралагычты орнотуу
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Бычактын айланышына жол бербөө үчүн шпиндельди бекитүү баскычын басып, кармап туруңуз.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Сырткы фланецти жана эски арааны алып салыңыз.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Кесүү тереңдигин жөндөө
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Тереңдикти жөндөө рычагын бошотуңуз.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Орнотууну бекитүү үчүн тереңдикти жөндөө рычагын бекем бууңуз.
4. Катуу бурчту тууралоо
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Конусту жөндөө рычагын бошотуңуз.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Иштөө нускамалары
1. Баштоо жана токтотуу
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Кесүү
- Даярдаманы cl менен бекем бекитиңизampкесүү учурунда кыймылга жол бербөө үчүн.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Материалды тартуудан мурун арааны баштаңыз жана бычактын толук ылдамдыгына жетиңиз.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Чаңды чыгаруу
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Техникалык тейлөө
Тазалоо
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Blade Care
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Сактагыч
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сау башталбайт | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Saw cuts slowly or binds | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Ашыкча термелүү | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Poor cut quality (rough edges, splintering) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Техникалык шарттар
- Модел: Einhell TE-CS 18/165-1 Li-Solo
- Тtage: 18 V (Battery Operated)
- Жүк жок ылдамдык: 4,200 XNUMX мин⁻¹
- Араанын диаметри: 165 мм
- Arbor Hole Diameter: 20 мм
- Max. Cutting Depth (90°): Болжол менен 54 мм
- Max. Cutting Depth (45°): Болжол менен 35 мм
- Элемент Салмагы: 2.72 кг (батареясыз)
- Бышактын материалы: Жогорку ылдамдыктагы болот
- Тиштердин саны: 24
- Өзгөчө өзгөчөлүгү: Зымсыз иштөө
- Камтылган компоненттер: Saw Blade
- Эскертүү: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Кепилдик жана колдоо
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
