1. Киришүү
Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.
2. Коопсуздук маалыматы
Сураныч, орнотуу жана иштетүү алдында бул коопсуздук нускамаларын кылдаттык менен окуп чыгыңыз. Бул нускамаларды аткарбоо электр шокуна, өрткө же башка коркунучтарга алып келиши мүмкүн.
- Кесиптик орнотуу: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
- Электр энергиясын өчүрүү: Түзмөктү орнотуудан, тейлөөдөн же тазалоодон мурун ар дайым автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
- Тtage: камсыз кылуу voltage matches the device's requirements (230 Volt AC).
- Экологиялык шарттар: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
- Өзгөртүү: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.
3. Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- 1x LEDVANCE 360DEG Wall Sensor device
4. Продукциянын өзгөчөлүктөрү
- Stand-alone motion and light sensor for wall mounting.
- 360° detection field for comprehensive coverage.
- Optimized for energy saving.
- Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
- Zero-crossing circuit optimized for the operation of LED luminaires.
- IP55 protection type, suitable for outdoor use.
- Designed to be disassembled for separate control of internal light sources (if applicable).
5. Орнотуу жана орнотуу
The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

5.1-сүрөт: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

5.2-сүрөт: Жакын план view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.
5.1 Монтаждалуучу жер
- Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
- Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
- Ensure the mounting surface is stable and can support the device's weight (250 grams).
5.2 Электрдик туташуу
- ЭСКЕРТҮҮ: Кандайдыр бир электрдик туташууларды жасоодон мурун электр энергиясын өчүрүңүз.
- Connect the sensor to a 230 Volt AC power supply.
- Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
- The zero-crossing circuit is optimized for LED luminaires.
6. Иштөө нускамалары
The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.
6.1 Иштөө режимдери
The sensor features three selectable operating modes:
- Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
- Activation by Motion: The connected light turns on when motion is detected within the 360° field.
- Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.
Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.
6.2 Аныктоо жөндөөлөрү
The sensor allows for adjustment of the light duration after detection:
- Жарык узактыгы: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.
7. Техникалык тейлөө
The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.
- Тазалоо: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
- Текшерүү: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.
8. Кыйынчылыктарды
If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:
- Жарык күйбөйт:
- Электр булагы туташып жана активдүү экендигин текшериңиз.
- Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
- Аныктоо аймагы тоскоолдуктардан таза экенине ынаныңыз.
- Adjust the sensitivity settings if available.
- Жарык үзгүлтүксүз күйүп турат:
- Check if the operating mode is set to 'Continuous Light On'.
- Ensure no constant motion is occurring within the detection zone.
- Light turns on unexpectedly:
- Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
- Adjust the sensor's sensitivity or detection range if possible.
Эгерде бул чечимдерди колдонуп көргөндөн кийин да көйгөй чечилбесе, кардарларды колдоо кызматына же квалификациялуу электрикке кайрылыңыз.
9. Техникалык шарттар
| Бренд | LEDVANCE |
| Модель номери | 4058075244832 |
| Продукт коду | SENSOR WALL 360DEG IP55 DG LEDV |
| Өлчөмдөрү (L x W x Y) | 7.6 x 9.5 x 11.1 см |
| Салмагы | 250 грамм |
| Материал | Поликарбонат |
| Түс | Кара |
| Тtage | 230 вольт |
| Power Source | AC |
| Коргоо рейтинги | IP55 |
| Монтаж түрү | Дубалга орнотуу |
| Аныктоо талаасы | 360 градус |
| Максималдуу аныктоо аралыгы | 10 метр |
| Иштөө режимдери | Continuous On, Motion Activated, Twilight Activated |
| Жарыктын узактыгын тууралоо | 2 seconds to 15 minutes (approx.) |
| Лампанын түрү шайкештиги | LED |
10. Кепилдик жана колдоо
The LEDVANCE 360DEG Wall Sensor comes with a 3 жылдык өндүрүүчүнүн кепилдиги сатып алынган күндөн тартып, нормалдуу пайдаланууда материалдардын жана жасалгалоонун кемчиликтерин жабуу.
For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the LEDVANCE бренд дүкөнү.
Сураныч, кепилдик максаттары үчүн сатып алганыңыздын далилин сактап коюңуз.





