Mafell LO-FA 207200 Router Adapter Instruction Manual

1. Киришүү

Thank you for choosing the Mafell LO-FA 207200 Router Adapter. This precision accessory is designed to enhance the capabilities of your Mafell LO 65 Ec router, enabling accurate and repeatable routing operations such as circle cutting, arc routing, and precise edge guiding. This manual provides essential information for the safe and effective use of your new adapter. Please read it thoroughly before operation and keep it for future reference.

2. Коопсуздук нускамалары

Always observe the following safety precautions when using the LO-FA 207200 Router Adapter in conjunction with your Mafell LO 65 Ec router:

• Read Router Manual: Always refer to the instruction manual of your Mafell LO 65 Ec router for comprehensive safety guidelines related to the power tool itself.
• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate PPE, including safety glasses, hearing protection, and a dust mask, when operating the router.
• Электр энергиясын өчүрүү: Disconnect the router from the power supply before making any adjustments, changing bits, or performing maintenance on the adapter or router.
• Коопсуз жумуш бөлүгү: Даярдоочу бөлүктүн бекем clamped or held to prevent movement during routing operations.
• Туура тиркеме: Verify that the LO-FA 207200 adapter is correctly and securely attached to the router before each use. Loose attachments can lead to loss of control and injury.
• Туруктуу иш бети: Work on a stable, level, and well-lit surface.
• Чаң чыгаруу: Utilize dust extraction systems to minimize airborne dust, especially when routing materials that produce fine particles.
• Колдонуудан мурун текшерүү: Before each use, inspect the adapter for any damage, wear, or loose components. Do not use if damaged.

3. Продукт бүтүп калдыview

The Mafell LO-FA 207200 Router Adapter is a robust accessory designed for precision routing. It consists of several key components that facilitate various routing tasks.

Figure 3.1: ашыкview of the Mafell LO-FA 207200 Router Adapter showing its main components including the base, guide rods, adjustment knobs, and clampмеханизмдер.

Негизги компоненттер:

• Main Adapter Body: The central frame that attaches to the router and supports the guide mechanisms.
• Жетектөөчү таякчалар: Two parallel rods that allow for precise linear movement or pivot for circular cuts.
• Жөндөө туткалары: Used to set the milling radius for circular cuts or the offset for edge guiding.
• Clampмеханизмдери: Securely fasten the adapter to the router and lock guide rod positions.
• Stop Jaws: Adjustable components for precise edge guiding (adjustment range: 0 - 54 mm).
• Height Compensation Plate: Allows for a 6 mm height compensation.

4. Орнотуу

Proper setup of the LO-FA 207200 adapter is crucial for accurate and safe operation.

4.1 Attaching the Adapter to the Router

1. Ensure your Mafell LO 65 Ec router is unplugged from the power source.
2. Align the mounting points of the LO-FA 207200 adapter with the corresponding attachment points on the base of your Mafell LO 65 Ec router.
3. Securely fasten the adapter using the provided screws or clamping mechanisms. Ensure there is no wobble or play.

4.2 Adjusting for Circle Routing

To cut circles or arcs, the adapter uses a pivot point. The milling radius can be adjusted from 97 mm to 380 mm.

1. Insert the compass pin into the designated bore on the adapter. The compass pin bore diameter is 4.5 mm.
2. Loosen the adjustment knobs on the guide rods.
3. Slide the router along the guide rods until the desired milling radius is achieved. Measure from the center of the router bit to the center of the compass pin.
4. Tighten the adjustment knobs firmly to lock the radius setting.

4.3 Adjusting for Edge Guiding

For straight edge routing, the adjustable stop jaws are used.

1. Loosen the locking mechanisms for the stop jaws.
2. Adjust the stop jaws to the desired offset from the router bit. The adjustment range is 0 - 54 mm.
3. Ensure both stop jaws are parallel to the router bit and tighten their locking mechanisms.

4.4 Height Compensation

The adapter offers a 6 mm height compensation feature, useful for specific routing depths or material thicknesses. Consult your router's manual for detailed depth setting procedures.

5. Иштөө нускамалары

Once the LO-FA 207200 adapter is properly set up, you can begin your routing operation.

5.1 Иштетүү боюнча жалпы кеңештер

• Always perform a test cut on scrap material to verify settings and ensure desired results.
• Maintain a firm grip on the router and adapter during operation.
• Move the router smoothly and consistently through the material. Avoid forcing the tool.
• Тереңирээк кесүү үчүн бир нече жолу өтүңүз, көбөйтүңүзasing ар бир өткөн сайын тереңдик.

5.2 Circle Routing Technique

Figure 5.1: The Mafell LO-FA 207200 Router Adapter in use for cutting a precise circle. The compass pin acts as a pivot point, guiding the router along the desired radius.

1. Mark the center point of your desired circle on the workpiece.
2. Drill a small pilot hole at the center point, suitable for the compass pin.
3. Insert the compass pin into the pilot hole.
4. With the router bit clear of the workpiece, turn on the router.
5. Slowly plunge the router bit into the material and begin rotating the router around the compass pin in a clockwise direction for conventional routing, or counter-clockwise for climb routing (refer to router manual for bit rotation and feed direction).
6. Maintain consistent pressure and speed for a clean cut.

5.3 Edge Guiding Technique

Figure 5.2: The Mafell LO-FA 207200 Router Adapter being used to guide the router along a straight edge of a workpiece. The adjustable stop jaws maintain a consistent distance from the edge.

Сүрөт 5.3: Жакыныраак view of the Mafell LO-FA 207200 Router Adapter during operation, highlighting the router's position relative to the adapter and the importance of dust management.

1. Ensure the stop jaws are correctly set for the desired offset from the edge.
2. Place the adapter's stop jaws firmly against the edge of the workpiece.
3. With the router bit clear of the workpiece, turn on the router.
4. Slowly plunge the router bit into the material.
5. Guide the router along the edge, keeping the stop jaws consistently pressed against the workpiece edge.
6. Maintain a steady feed rate for a smooth and even cut.

6. Техникалык тейлөө

Regular maintenance will ensure the longevity and optimal performance of your LO-FA 207200 Router Adapter.

• Тазалоо: After each use, disconnect the adapter from the router and clean it thoroughly. Remove all dust, wood chips, and debris using a brush or compressed air. Avoid using solvents that may damage the material.
• Текшерүү: Periodically inspect all components for signs of wear, damage, or deformation. Pay close attention to guide rods, adjustment mechanisms, and clampпункттары.
• Майлоо: Lightly lubricate the guide rods and any moving parts with a dry lubricant or silicone spray to ensure smooth operation. Avoid excessive lubrication that can attract dust.
• Сактагыч: Store the adapter in a clean, dry place, away from direct sunlight and extreme temperatures. Protect it from impacts that could cause misalignment or damage.

7. Кыйынчылыктарды

If you encounter issues with your LO-FA 207200 Router Adapter, refer to the following common problems and solutions:

8. Техникалык шарттар

Technical specifications for the Mafell LO-FA 207200 Router Adapter:

• Модел: LO-FA 207200
• Шайкештик: Mafell LO 65 Ec Router
• Milling Radius: 97 - 380 мм
• Height Compensation: 6 мм
• Compass Pin Bore Diameter: 4.5 мм
• Stop Jaw Adjustment Range: 0 - 54 мм
• Салмагы: 1.5 кг (болжол менен)
• Материал: Aluminium, Acrylonitrile Butadiene Styrene (ABS)

9. Кепилдик жана колдоо

For information regarding warranty coverage, spare parts, or technical support for your Mafell LO-FA 207200 Router Adapter, please contact your authorized Mafell dealer or visit the official Mafell webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Note: Information regarding spare parts availability for this specific model is currently unavailable in our records. Please contact Mafell customer service for the most up-to-date information.