ECHO CS-2511T-14 14-inch 25.0 cc Gas 2-Stroke Top Handle Chainsaw User Manual

Introduction

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your ECHO CS-2511T-14 14-inch 25.0 cc Gas 2-Stroke Top Handle Chainsaw. Please read this manual thoroughly before operating the chainsaw to ensure proper use and to prevent injury or damage.

Image: The ECHO CS-2511T-14 14-inch 25.0 cc Gas 2-Stroke Top Handle Chainsaw, featuring its orange and black casing with a silver guide bar and chain.

Коопсуздук маалыматы

Operating a chainsaw can be dangerous. Always follow safety precautions to minimize risks. Failure to do so may result in serious injury or death.

• Жеке коргонуу каражаттары (ЖКК): Ар дайым коопсуздук туулгасын, көздү, угууну коргоочу каражатты, бекем кол каптарды, чынжырлуу араадан коргоочу шымды же бут кийимди жана коопсуздук өтүгүн кийиңиз.
• Иш чөйрөсү: Ensure the work area is clear of bystanders, children, and pets. Maintain a firm footing and balance.
• Күйүүчү май иштетүү: Mix and handle fuel in a well-ventilated area, away from ignition sources. Do not smoke while fueling.
• Артка кайтаруу: Багыттоочу тилкенин учундагы кыймылдуу чынжыр бир нерсеге тийгенде же жыгач жабылып, кесилген араа чынжырын чымчып алганда пайда болушу мүмкүн болгон артка соккудан кабардар болуңуз.
• Текшерүү: Before each use, inspect the chainsaw for loose fasteners, damaged parts, and proper chain tension.
• Чынжырлуу арааны эч качан бир кол менен иштетпеңиз. This chainsaw is designed for two-handed operation.

Пакеттин мазмуну

Таңгактан чыгарганда, бардык буюмдардын бар экенин жана бузулбаганын текшериңиз:

• ECHO CS-2511T-14 Chainsaw Powerhead
• 14-inch Guide Bar
• Chain Chain
• Гид тилкесинин капкагы
• Оператордун колдонмосу
• Basic Tool Kit (as indicated by product information)

Орнотуу жана чогултуу

1. Багыттоочу тилкени жана чынжырды орнотуу

1. Ensure the engine is off and the chain brake is disengaged.
2. Remove the chain cover by loosening the two nuts.
3. Place the chain around the clutch drum, ensuring the cutting edges face forward on the top of the guide bar.
4. Fit the guide bar onto the studs, aligning the chain drive links with the groove in the guide bar.
5. Replace the chain cover and hand-tighten the nuts. Do not fully tighten yet.
6. Adjust chain tension using the tensioning screw. The chain should be snug against the guide bar, but still able to be pulled freely by hand.
7. Fully tighten the chain cover nuts.

2. Күйүүчү май жана чынжыр майы

This chainsaw uses a 2-stroke engine and requires a specific fuel mixture and chain lubricant.

• Күйүүчү май аралашмасы: Use fresh, unleaded gasoline mixed with high-quality 2-stroke engine oil at the ratio specified in the full operator's manual (typically 50:1 for ECHO).
• чынжыр майы: Fill the chain oil tank with good quality bar and chain oil. Do not use waste oil or motor oil.

Image: A detailed diagram of the ECHO CS-2511T-14 chainsaw, highlighting key features such as the dual-post chain brake, textured grip, clutch-driven adjustable oiler, large tank opening, fine grid starter cover, and G-Force Engine Air Pre-Cleaner.

Иштөө нускамалары

1. Кыймылдаткычты ишке киргизүү (Муздак от алдыруу)

1. чынжыр арааны бекем, жалпак бетке кой.
2. Чынжыр тормозун иштетиңиз.
3. Push the primer bulb 5-7 times until fuel is visible.
4. Pull the choke lever to the FULL CHOKE position.
5. Pull the starter handle firmly until the engine fires (usually 1-3 pulls).
6. Push the choke lever to the HALF CHOKE position.
7. Кыймылдаткыч иштеп баштаганга чейин стартердин туткасын кайра тартыңыз.
8. Once running, push the choke lever to the RUN position.
9. Disengage the chain brake and allow the engine to warm up for a few moments before use.

2. Кесүү техникасы

• Ар дайым чынжыр арааны эки колуңуз менен бекем кармаңыз.
• Туруктуу абалды сактаңыз.
• Артка соккуну болтурбоо үчүн багыттоочу тилкенин учу менен кесүүдөн качыңыз.
• Let the saw do the work; do not force it through the wood.
• Be aware of falling branches and shifting logs.

3. Моторду токтотуу

To stop the engine, simply push the stop switch to the "OFF" position.

Сүрөт: жакын план view of the ECHO CS-2511T-14 chainsaw's engine housing, showing the air filter cover, fuel cap, oil cap, and control switches, with an emission control information label visible.

Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the life of your chainsaw. Always ensure the engine is off and cool before performing any maintenance.

• чынжыр чыңалуу: Check chain tension frequently. A properly tensioned chain should be snug but still able to be pulled around the guide bar by hand.
• чынжыр курчутуу: A sharp chain is crucial for safe and efficient cutting. Sharpen the chain regularly or replace it when dull. Refer to the full manual for specific sharpening angles and file өлчөмдөрү.
• Аба чыпкасы: Clean the air filter regularly, especially in dusty conditions. A clogged air filter can reduce engine performance.
• Свеча: Inspect the spark plug periodically. Clean or replace it if it's fouled or worn.
• Гид тилкеси: Clean the guide bar groove and oil holes. Flip the guide bar periodically to ensure even wear.
• тиштүү: Inspect the drive sprocket for wear and replace if necessary.

Сүрөт: жакын план view of the ECHO chainsaw's guide bar and chain, showing the "ECHO" branding on the bar and the sharp cutting teeth of the chain.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For detailed warranty information, please refer to the warranty card included with your product or visit the official ECHO website. For technical support, service, or parts, please contact an authorized ECHO service dealer.

Маанилүү: Always use genuine ECHO replacement parts to maintain product integrity and warranty coverage.

Расмий продукт Videos

Берилген маалыматтарда бул модель үчүн сатуучунун расмий продукт видеолору табылган жок.