JOYO O.M.B R-06

JOYO O.M.B R-06 Looper Drum Machine Pedal Instruction Manual

Model: O.M.B R-06

Introduction

This manual provides detailed instructions for the JOYO O.M.B R-06 Looper Drum Machine Pedal. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its features.

JOYO O.M.B R-06 Looper Drum Machine Pedal front view

Сүрөт: алдыңкы view of the JOYO O.M.B R-06 Looper Drum Machine Pedal, showcasing its controls and purple finish.

Негизги өзгөчөлүктөрү

JOYO O.M.B R-06 Looper & Drum Machine Pedal in use

Image: The JOYO O.M.B R-06 pedal connected to a guitar, illustrating its use in a performance setup.

Орнотуу нускамалары

  1. Кубат туташуу:

    Connect a DC 9V (center minus) power adapter to the pedal's power input. Ensure the adapter meets the working current requirement of 150mA. A power adapter is not included with the pedal.

    Power input for JOYO O.M.B R-06 pedal

    Image: Close-up of the DC 9V power input on the JOYO O.M.B R-06 pedal, indicating polarity.

  2. Аспап туташуу:

    Connect your electric guitar to the pedal's input jack using a 1/4-inch instrument cable. Connect the pedal's output jack to your amplifier or other effects units using another 1/4-inch instrument cable.

    JOYO O.M.B R-06 pedal connection diagram

    Image: Diagram showing the connection of the JOYO O.M.B R-06 pedal between a guitar and an ampөмүрлүү.

  3. Алгачкы текшерүү:

    Before playing, ensure all connections are secure and the pedal is receiving power. The LED lights on the pedal will illuminate upon power-up.

Иштөө нускамалары

Controls Overview

Close-up of JOYO O.M.B R-06 pedal controls

Сүрөт: деталдуу view of the control knobs and switches on the JOYO O.M.B R-06 pedal.

Looper Mode (LOOPER Switch Position)

  1. Жаздырууну баштоо: Press the foot switch once to start recording. The LED will indicate recording status.
  2. Stop Recording/Start Playback: Press the foot switch again to stop recording and immediately start playback of the loop.
  3. Overdub: While the loop is playing, press the foot switch once to enter overdub mode. Subsequent presses will toggle between playback and overdub.
  4. Артка кайтаруу/кайталоо: Press and hold the foot switch for 2 seconds to undo the last overdub. Repeat to redo.
  5. Ойнотууну токтотуу: Double-press the foot switch to stop playback.
  6. Таза цикл: While playback is stopped, press and hold the foot switch for 2 seconds to clear the current loop.

Эскертүү: The looper features an auto-align function and a count-in for the first recording to help with timing.

Drum Machine Mode (DRUM Switch Position)

  1. Select Genre: бургула ЖАНР knob to choose from the available drum pattern genres.
  2. Select Beat: бургула БАР knob to select a specific drumbeat within the chosen genre.
  3. Start/Stop Drum Machine: Press the foot switch once to start or stop the drum pattern.
  4. Set Tempo (TAP Tempo): басыңыз TAP button repeatedly to set the desired tempo for the drum pattern. The LED will flash to indicate the tempo.

Looper + Drum Mode (L+D Switch Position)

In this mode, the looper and drum machine operate simultaneously, synchronized by the drum machine's tempo.

  1. Start Drum Machine: Press the foot switch once to start the drum pattern.
  2. Start Recording Loop: After the drum pattern starts, press the foot switch again to begin recording your loop, synchronized with the drum beat.
  3. Overdub/Playback: Subsequent presses of the foot switch will toggle between overdubbing and playing back the loop, all while the drum machine continues.
  4. Stop Both: Double-press the foot switch to stop both the looper and the drum machine.

Техникалык тейлөө

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Үн чыгышы жок.Incorrect cable connections, no power, or pedal is bypassed.
  • Бардык прибор кабелдеринин туташууларын текшериңиз.
  • Электр кубаты туура туташтырылганын жана иштешин текшериңиз.
  • Verify the pedal is engaged (not in bypass).
Loop recording is out of sync.Timing issues during recording.
  • Utilize the count-in function for the first recording.
  • Practice timing your foot switch presses.
  • Ensure the drum machine tempo is set correctly if in L+D mode.
Drum patterns are too fast/slow.Incorrect tempo setting.колдонуу TAP button to adjust the tempo to your desired speed.
Unexpected noise or hum.Incompatible power supply, ground loop, or faulty cables.
  • Use a high-quality, regulated 9V DC (center minus) power supply with sufficient current (150mA or more).
  • Кабелдердин бузулушу бар-жоктугун текшериңиз.
  • Try isolating the pedal's power supply from other devices.

Техникалык шарттар

JOYO O.M.B R-06 pedal dimensions and specifications

Image: Visual representation of the JOYO O.M.B R-06 pedal's dimensions and key specifications.

Кепилдик маалымат

JOYO products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official JOYO webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Кардарларды колдоо

For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact JOYO customer support. You can often find support contact information on the official JOYO webсайт же сатуучу аркылуу.

If you purchased through Amazon, you can send a message to the seller via your order details for assistance.

Тектеш документтер - O.M.B R-06

Preview JOYO JF-06 Vintage Phase Guitar Effect Pedal User Manual
JOYO JF-06 Vin үчүн кеңири колдонуучу колдонмосуtage Фазалык гитара эффектинин педалы, каптоочу эскертүүлөр, батареяны алмаштыруу, колдонуу боюнча нускамалар, техникалык мүнөздөмөлөр, кепилдик жөнүндө маалымат жана өндүрүүчүнүн чоо-жайы.
Preview JOYO UZI R-03 Distortion Guitar Effect Pedal - Колдонуучунун колдонмосу жана спецификациялары
JOYO UZI R-03 Distortion гитара эффект педалы жөнүндө толук маалымат, анын ичинде спецификациялар, функциялар, башкаруу элементтери жана кепилдик маалыматы. UZI R-03 кантип колдонууну жана тейлөөнү үйрөнүңүз.
Preview JOYO R-11 BAATSIN Overdrive гитара педалы - колдонуучунун колдонмосу жана мүнөздөмөлөрү
Revolution сериясындагы JOYO R-11 BAATSIN Overdrive гитара педалынын толук мүнөздөмөлөрү, функциялары, башкаруу элементтери, туташуулары жана кепилдик жөнүндө маалымат. Продукцияны тейлөө саясаты жана квалификациялык сертификат камтылган.
Preview JOYO DARK FLAME R-17 Distortion Guitar Effect Pedal Manual
Комплекстүү колдонуучу колдонмо жана продуктview JOYO R-17 DARK FLAME бурмалоо гитара эффект педалы үчүн, Revolution Series бөлүгү. Техникалык мүнөздөмөлөрдү, башкаруу сүрөттөмөлөрүн, LED жарык режимдерин, кепилдик маалыматын жана өндүрүүчүнүн чоо-жайын камтыйт.
Preview JOYO D-SEED II Dual Channel Digital Delay with Looper - Колдонуучунун колдонмосу
Looper педалы менен JOYO D-SEED II Dual Channel Digital Delay үчүн комплекстүү колдонуучу колдонмосу, өзгөчөлүктөрү, иштеши, спецификациялары жана коопсуздук эрежелери. Кечиктирүү режимдери, лупанын иштеши жана туташуусу тууралуу маалыматты камтыйт.
Preview JOYO AT Drive Ironman Series Guitar Effect Pedal Manual
Толук спецификациялар жана башкаview JOYO AT Drive Ironman Series гитара эффективдүү педалы үчүн, EQ жана үн башкаруусу бар көп тараптуу ашыкча педаль.