1. Киришүү
The Skytech Smart Stat IV remote control system provides wireless thermostatic and timer control for gas heating fireplaces. This system includes a remote control transmitter and a 110V AC receiver. It is designed for use with standard millivolt valves and electronic spark ignitions, offering convenient operation of your fireplace.
2. Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Smart Stat IV Transmitter Remote Control
- Receiver Box (UL Listed 110V)
- Wall Clip for Transmitter
- Wires with Connectors (18 inch)
- AAA батареялары (2)
- Көрсөтмө (бул документ)
3. Орнотуу жана орнотуу
3.1 Кабылдагычты орнотуу
The receiver connects to the fireplace's control system. It features a slide switch with three positions: ON, АЛЫСКЫ, жана ӨЧҮРҮҮ. The ON position manually activates the fireplace, ӨЧҮРҮҮ deactivates it, and АЛЫСКЫ allows control via the transmitter.
3.2 Wiring for Millivolt Valves
For fireplaces with millivolt gas valves, connect the receiver using the provided wires to the TH (Thermostat) and TP (Thermopile) terminals on the gas valve. Ensure the pilot light is lit before operation.
3.3 Wiring for Electronic Spark Ignitions
For fireplaces with electronic spark ignitions, the receiver connects to the TR (Transformer) and TH (Thermostat) terminals on the electronic module. This setup typically involves a 110V/24VAC transformer.
3.4 Трансмиттердин батареясын орнотуу
The transmitter requires two (2) 1.5V AAA batteries. Open the battery compartment on the back of the transmitter and insert the batteries, observing the correct polarity. A low battery indicator will appear on the LCD when replacement is needed.
3.5 Pairing the Transmitter and Receiver (Learning Function)
The receiver has a learning function to synchronize with the transmitter. Consult the specific instructions provided with your receiver for the pairing procedure. Typically, this involves pressing a 'Learn' button on the receiver and then a button on the transmitter within a short timeframe. The receiver can learn up to two additional Skytech remotes.
4. Иштөө нускамалары
4.1 Алыстан башкаруунун схемасы
The transmitter features a 5-button interface:
- РЕЖИМ: Cycles through operating modes (ON, THERMO, OFF).
- ӨЙДӨ / ТӨМӨНГҮ: Adjusts temperature settings in Thermostat mode and time settings.
- ЖӨНДӨӨ: Confirms settings, primarily for temperature in Thermostat mode.
- TIMER&TIME: Cycles between manual and timer mode, and also used to set the 24-hour clock.
4.2 LCD дисплей
The crystal clear LCD screen displays the following information:
- 24 сааттык саат: Учурдагы убакытты көрсөтөт.
- Бөлмөнүн температурасы: Shows the current ambient temperature in degrees Fahrenheit or Celsius.
- Температураны коюу: Displays the desired temperature when in Thermostat mode.
- Flame Icon: Appears when the fireplace is actively operating.
- Төмөн батарея көрсөткүчү: Notifies when transmitter batteries require replacement.
4.3 Саатты орнотуу
басып, кармап туруңуз TIMER&TIME button until the hour digits begin to flash. Use the UP or ылдый саатты тууралоо үчүн баскычтар. Басыңыз TIMER&TIME мүнөттөрдү коюу үчүн дагы, анан колдонуңуз UP or ылдый. Басыңыз TIMER&TIME ырастоо жана чыгуу үчүн дагы бир жолу.
4.4 Кол режими
басыңыз РЕЖИМ button until 'ON' appears on the display. The fireplace will turn on. Press РЕЖИМ again until 'OFF' appears to turn the fireplace off. In manual mode, the fireplace operates continuously until turned off.
4.5 Термостат режими
басыңыз РЕЖИМ button until 'THERMO' appears on the display. The current room temperature and a default set temperature will be shown. Use the UP or ылдый buttons to adjust the desired set temperature. Press SET to confirm. The fireplace will operate to maintain the set temperature, activating when the room temperature falls 2°F below the set temperature and deactivating when it rises 2°F above.
4.6 Таймер режими
While in Manual or Thermostat mode, press the TIMER&TIME button to activate the countdown timer. Use the UP or ылдый buttons to set the desired operating duration, up to a maximum of 9 hours. The fireplace will automatically turn off once the set time has elapsed.
5. Техникалык тейлөө
5.1 Батареяны алмаштыруу
When the low battery indicator appears on the transmitter's LCD, replace the two (2) AAA batteries promptly to ensure continued operation. Always use fresh batteries of the specified type.
5.2 Тазалоо
Clean the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Fireplace does not turn on/off via remote. | Low transmitter batteries, receiver switch not in REMOTE position, receiver not powered, receiver not paired. | Replace transmitter batteries. Set receiver switch to REMOTE. Check 110V power to receiver. Re-pair transmitter and receiver. |
| LCD дисплей бош же күңүрт. | Өткөргүчтүн батареяларынын аз кубаттуулугу. | Бергич батареяларын алмаштырыңыз. |
| Fireplace turns on/off at incorrect temperatures in Thermostat mode. | Incorrect set temperature, remote placement. | Verify set temperature. Ensure remote is not near heat sources or drafts. |
| Fireplace does not respond to any remote commands. | Receiver wiring issue, gas supply issue, pilot light off. | Check all wiring connections to the gas valve/electronic module. Ensure gas supply is on. Relight pilot light if necessary. |
7. Техникалык шарттар
- Продукциянын өлчөмдөрү: 6 x 3 x 2 дюйм
- Элемент Салмагы: 14 унция
- Өндүрүүчү: Skytech
- Модель номери: SMART-STAT-IV
- Бренд: СкайТех
- Өзгөчө өзгөчөлүгү: Эргономикалык дизайн
- Түсү: Кара
- Колдоого алынган түзмөктөрдүн максималдуу саны: 1 (per receiver)
- Шайкеш түзмөктөр: Fire Pit, Fireplace
- Өткөргүч кубаттуулугу: 2 x 1.5V AAA батарейкалары
- Алуучу күчү: 110V AC
8. Кепилдик жана колдоо
Warranty information for the Skytech Smart Stat IV Heat-N-Glo Fireplace Remote Control is not provided within this instruction manual. For details regarding warranty coverage or technical support, please refer to the product packaging or contact Skytech customer service directly.
