ORACLE 1720-504

ORACLE Lighting ColorSHIFT BC1 Bluetooth Controller User Manual

Модели: 1720-504

1. Киришүү

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ORACLE Lighting ColorSHIFT BC1 Bluetooth Controller. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

The ORACLE Lighting ColorSHIFT BC1 Bluetooth Controller is designed to manage RGB LED ColorSHIFT lights, offering customizable lighting effects via a Bluetooth-enabled application.

2. Продукт бүтүп калдыview

2.1 Пакеттин мазмуну

2.2 Негизги өзгөчөлүктөрү

ORACLE Lighting BC1 Bluetooth Controller and included accessories

Figure 1: ORACLE Lighting BC1 Bluetooth Controller and included accessories, including the main controller unit, four accessory plugs with waterproof connections, and three waterproof end caps.

3. Коопсуздук маалыматы

Always disconnect the vehicle's battery before performing any electrical work. Ensure all connections are secure and properly insulated to prevent short circuits. This product is designed for 12VDC automotive systems. Do not exceed the maximum current output of 10A per channel.

Сунуш 65 Эскертүү: Бул продукт Калифорния штатында рак жана тубаса кемтик же башка репродуктивдүү зыян келтирүүчү химиялык заттарды камтышы мүмкүн. Көбүрөөк маалымат алуу үчүн, киргиле www.P65Warnings.ca.gov.

4. Орнотуу

4.1 Алдын ала орнотуу текшерүү тизмеси

4.2 Электр зымдары боюнча нускамалар

  1. Кубат туташуу: Connect the positive (+) wire (typically red) from the BC1 controller to a constant 12V power source. It is recommended to use an inline 10A fuse within 12 inches of this connection.
  2. Жерге туташуу: Connect the negative (-) wire (typically black) from the BC1 controller to a reliable chassis ground point on the vehicle.
  3. LED жарык байланыштары: Connect your RGB LED ColorSHIFT lights to the four output ports on the BC1 controller. Each output port is waterproof. Ensure the connections are secure.
  4. Unused Ports: If not all four output ports are used, install the provided waterproof end caps on the unused ports to protect them from moisture and debris.
ORACLE Lighting BC1 Bluetooth Controller with wiring connections

Figure 2: The ORACLE Lighting BC1 Bluetooth Controller showing its main unit and the four output wires with waterproof connections, ready for installation.

4.3 Контроллерди орнотуу

Secure the BC1 controller in a location that is protected from extreme heat and direct physical damage. Use zip ties or mounting screws (not included) to firmly attach the controller. Ensure the location allows for proper cable routing and access if needed.

5. Операция

5.1 Колдонмону орнотуу

The ORACLE Lighting ColorSHIFT BC1 Controller is operated via a dedicated mobile application. Download the "ColorSHIFT" app from your device's app store (available for iOS and Android).

5.2 Контроллерге туташуу

  1. Ensure your vehicle's battery is reconnected and the controller is powered.
  2. Мобилдик түзмөгүңүздө Bluetooth'ду иштетиңиз.
  3. Open the ColorSHIFT app. The app will automatically scan for and connect to nearby BC1 controllers.
  4. Once connected, the app interface will display controls for your lights.

5.3 Негизги функциялар

Vehicle interior with ColorSHIFT LED lighting

3-сүрөт: Мисample of ColorSHIFT LED lighting installed in a vehicle interior, demonstrating customizable color options.

6. Техникалык тейлөө

The ORACLE Lighting BC1 Bluetooth Controller requires minimal maintenance. Periodically inspect all wiring connections for corrosion or damage. Ensure the controller unit is free from excessive dirt or moisture buildup. Clean the unit with a soft, dry cloth if necessary.

Due to its waterproof design (IP67), the controller is protected against dust ingress and temporary immersion in water. However, prolonged submersion or high-pressure water jets should be avoided.

7. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Жарыктар күйбөйт.No power to controller; loose wiring; blown fuse; faulty LED lights.Check power and ground connections. Verify fuse. Test LED lights independently.
Bluetooth аркылуу туташуу мүмкүн эмес.Bluetooth disabled on device; app not open; controller out of range; interference.Ensure Bluetooth is on. Open the ColorSHIFT app. Move closer to the controller. Restart app/device.
Lights do not respond to app commands.Poor Bluetooth connection; app malfunction; controller malfunction.Verify strong Bluetooth connection. Restart the app. If issues persist, contact support.
Lights reset to default color upon vehicle startup.Controller wired to switched power instead of constant power for memory retention.The BC1 controller does not retain settings if power is cut. For memory retention, the controller's positive wire needs constant 12V power. A relay can be used to switch the LED power while keeping the controller powered (refer to advanced wiring diagrams or professional installation).

8. Техникалык шарттар

ORACLE Lighting BC1 Bluetooth Controller specifications

Figure 4: Visual representation of the ORACLE Lighting BC1 Bluetooth Controller and its key specifications, including input voltage, current output, operation type, and weatherproof rating.

9. Кепилдик жана колдоо

9.1 Кепилдик маалыматы

ORACLE Lighting products are manufactured to high standards. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official ORACLE Lighting webсайт.

9.2 Кардарларды колдоо

If you encounter any issues or have questions regarding your ORACLE Lighting ColorSHIFT BC1 Bluetooth Controller, please contact ORACLE Lighting customer support through their official webсайт же продукт таңгагында көрсөтүлгөн байланыш маалыматы.

ORACLE Lighting Webсайт: www.oraclelights.com